NZXT N7 Z499 ATX Motherboard User Manual

SAFETY PRECAUTION
Follow these safety precautions when installing the motherboard:

• It is recommended to wear a grounding strap attached to a grounded device to avoid damage from static electricity.
• Discharge static electricity by touching the metal case of a safely grounded object before working on the motherboard.
• Leave components in the static-proof bags.
• Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components.

PACKAGE CONTENTS

A. Placa base N7 Z490
B. cables SATA
C. Tornillos M.2
D. Antena inalámbrica

SPECIFICATIONS

CPU & Socket
LGA socket 1200 for Intel® 10th Generation Core™ i9/ Core™ i7/
Core™ i5/ Core™ i3 Processors

• Supports Intel 14nm CPU
• Supports Intel Turbo Boost Technology 2.0

Chipset
Intel® Z490

Memory
4 x DIMM, Max. 128GB, DDR4

• 4266 (O.C.)/4133 (O.C.)/ 4000(O.C.)/ 3866(O.C.)/ 3733(O.C.)/
  3600(O.C.)/ 3466(O.C.)/ 3400(O.C.)/ 3333(O.C.)/ 3300(O.C.)/
  3200(O.C.)/ 3000(O.C.)/ 2800(O.C.)/ 2666(O.C.)/ 2400(O.C.)/ 2933/
  2800/ 2666/ 2400/ 2133 MHz Non-ECC, Un-buffered Memory

• Dual-channel memory architecture

• Support Intel® Extreme Memory Profile (XMP) 2.0

Integrated Graphics
Integrated Graphics Processor- Intel® HD Graphics Support
Single-graphic output support: HDMI port

• HDMI™ with max. resolution of 4096×2160@24Hz
• Maximum shared memory of 1024MB (for iGPU exclusively)

Multi-GPU Support
Supports AMD 2-Way CrossFireX™ Technology

Storage
Intel® Z490 Chipset

• 1 * M.2 type 2242/2260/2280 (PCIe 3.0 x4 & SATA mode)
• 1 * M.2 type 2242/2260/2280 (PCIe 3.0 x4 mode only)
• 4 * SATA 6Gb/s ports
  Supports RAID 0/1/5/10
  Supports Intel® Smart Response Technology
  Intel® Rapid Storage Technology 15
  Intel® Optane Memory Ready

LAN
Realtek® RTL8125BG 2.5G LAN

Wireless
Intel® Dual Band Wireless-AX200 Wi-Fi 6

• Wi-Fi 802.11 a/b/g/n/ac/ax
• Supports dual band frequency 2.4/5GHz
• Supports MU-MIMO

Bluetooth
Bluetooth V5.1

Audio
Realtek® ALC1220 Codec
8-Channel High Definition Audio, 32-bit /192KHz DAC
Nichicon Fine Gold Series Audio Capacitors

USB Ports

• 1 x USB 3.2 Gen 2 ports (1 at back panel [blue])
• 1 x USB 3.2 Gen 2 Type-C (at back panel)
• 1 x USB 3.2 Gen 2 front panel port (For USB Type-C)
• 4 x USB 3.2 Gen 1 ports (2 at back panel [blue], 2 at mid-board)
• 8 x USB 2.0 ports (2 at back panel, 6 at mid-board)

Expansion Slots

• 2 * PCIe 3.0 x16 (x16 or dual at 16/x4)
• 3 * PCIe 3.0 x1

Rear I/O

• 1 * USB 3.2 Gen 2 ports (Light Blue)
• 2 * USB 3.2 Gen 1 ports (Blue)
• 1 * USB 3.2 Gen 2 Type-C port
• 2 * USB 2.0 ports
• 1 * HDMI™ 1.4b
• 1 * 2×2 Wireless antenna
• 1 * Clear CMOS button
• 1 * LAN (RJ45) port
• 1 * Optical S/PDIF Out port
• 1 * 5.1-Channel audio jacks

Internal I/O

• 1 * 24-pin EATX power connector

• 1 * 8+4-pin ATX 12V power connector

• 1 * 4-pin CPU_FAN connector (Up to 24W per channel)

• 1 * 4-pin AIO_PUMP connector (Up to 24W per channel)

• 5 * 4-pin SYS_FAN connectors (Up to 24W per channel)

• 2 * NZXT RGB LED connectors

• 1 * 5V Addressable RGB LED connectors

• 1 * 12V RGB LED connectors

• 3 * USB 2.0 header (Up to 6 USB 2.0 ports)

• 1 * USB 3.2 Gen1 header (Up to 2 USB 3.2 Gen 1 ports)

• 1 * USB 3.2 Gen2 front panel header (For USB Type C)

• 4 * SATA 6Gb/s connectors

• 1 * M.2 Socket 3 with M Key, type 2242/2260/2280
  storage device support (PCIe 3.0 x4 & SATA mode)

• 1 * M.2 Socket 3 with M Key, type 2242/2260/2280
  storage device support (PCIe 3.0 x4 mode only)

• 1 * M.2 Socket 1 with E Key, (For wireless cards,
  supports CNVio)

• 1 * Power button

• 1 * Reset button

• 1 * Front panel audio connector

• 4 * POST LEDs

Operating System
Microsoft® Windows® 10 (64-bit)

Form Factor
ATX

_ COVER ___

_ COMPONENTS & PORTS _

1. CPU Socket                             LGA 1200 socket for Intel® 10th Generation processor
2. AIO_PUMP                           4-pin AIO pump connector
3. NZXT RGB                           1 & 2 4-pin LED header
4. DIMM A1-B2                        288-pin DDR4 memory slots
5. SYS_FAN 4-5                        4-pin fan connectors
6. ATX_POWER                       24-pin ATX power connector
7. USB3G2C_1                          Front panel USB 3.2 Gen 2 Type-C header
8. USB3G1_1                             Front panel USB 3.2 Gen 1 header
9. SATA 1-4                               Serial ATA 6Gbps connectors
10. Front Panel Connecters         Front panel switches and LED connectors
11. Power Button                        Power Button
12. Reset Button                         Reset Button
13. M2_2                                    M.2 Socket 3 with M key, supports type 2242/2260/2280 storage devices (Supports PCIE)
14. POST LEDs                         Boot status indicator
15. SYS_FAN 1-3                       4-pin fan connectors
16. USB2_1-3                             Front panel USB 2.0 headers
17. 12V RGB1                            4-pin 12V LED header
18. 5V ARGB1                           3-pin 5V LED header
19. FRONT_AUDIO                 Front panel audio connector
20. PCIEX1_3                            PCI Express x1 Gen3 slot
21. PCIEX1_2                            PCI Express x1 Gen3 slot
22. PCIEX16_2                          PCI Express x16 Gen3 slot for GPU
23. Battery                                  CMOS Battery
24. M2_3                                    M.2 Socket 1 with E key, supports type 2230 wireless devices with CNVio
25. PCIEX16_1                          PCI Express x16 Gen3 slot for GPU
26. M2_1                                    M.2 Socket 3 with M key, supports type 2242/2260/2280 storage devices (Supports PCIE & SATA mode)
27. PCIEX1_3                            PCI Express x1 Gen3 slot
28. ATX_12V                             8+4-pin +12V power connector
29. CPU_FAN                            4-pin CPU fan connector

1. Wireless Antenna
2. Clear CMOS Button
3. HDMI 1.4b port
4. USB 2.0 x 2
5. USB 3.2 Gen 2
6. USB 3.2 Gen 2 Type-C
7. RJ45 LAN port
8. USB 3.2 Gen 1 x 2
9. Audio ports
   A. Center and Subwoofer
   B. Rear Surround
   C. Optical SPDIF Out port
   D. Line-in
   E. Front Left and Right
   F. Microphone

_ CPU SOCKET ___
The surface of the LGA 1200 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for placement within the socket.

DIMM SLOTS

The DIMM slots are located here. Please see the diagram for recommended memory configuration.

PCI EXPRESS EXPANSION SLOTS

See the diagram below for the list of slots. Please install graphics cards using the PCIEX16_1 first then the PCIEX16_2

SATA CONNECTORS

These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device. No ports utilize the same bandwidth with any M.2.

M.2 SLOTS FOR STORAGE

There are two M.2 slots on the N7 motherboard. You will need to remove the steel cover pieces prior to installation. The M.2 slots supports form factors up to type 2280.

M.2 SLOT FOR WIRELESS CONNECTIVITY

ANTENNA
_ _

POWER CONNECTORS
These connectors connect to an ATX power supply

24-pin ATX_POWER

8+4-pin ATX_12V

USB CONNECTORS
These connectors allow you to connect to the front panel USB ports or devices requiring internal USB ports.

FRONT PANEL AUDIO CONNECTOR
This connector connects to the front panel audio on the case.

FRONT PANEL CONNECTOR
These connectors connect to the switches and indicator LEDs on the case.

FAN CONNECTORS
The CPU_FAN connector supports 4-pin PWM fans up to 2A (24W). The AIO_PUMP and the five SYS_FAN connectors automatically detects if a 4-pin PWM(Pulse Width Modulation) or 3-pin fan is in use and supports up to 2A(24W) each. The fan speeds can be adjusted within CAM.

NZXT RGB CONNECTORS
There are two NZXT RGB headers located on the motherboard. The NZXT RGB ports are compatible with NZXT lighting accessories. Each channel supports up to 40 LEDs and up to 6 accessories.

5V ADDRESSABLE RGB CONNECTOR
A 5V Addressable RGB is located on the motherboard. This port supports WS2812B addressable RGB LED strip (5V/Data/GND), with a maximum power rating of 3A (5V) and supports up to 40 LEDs.

12V RGB CONNECTOR
A 12V RGB is located on the motherboard. This port supports standard 5050 RGB LED strip (12V/G/R/B), with a maximum power rating of 3A (12V) and length within 2 meters.

BUTTONS AND POST LEDS
Power and Reset Button
The power and reset button allow you to power on and reset the motherboard without connecting to a switch which is useful when testing.

Post LEDs
Post LEDs diagnoses the computer when users power on their system. It will light up to indicate whether the CPU, memory, VGA or storage is dysfunctional. The lights go off if the four mentioned above are functioning normally.

Clear CMOS Button
The Clear CMOS button located on the rear I/O can be used to revert BIOS settings to default. To clear CMOS, turn off the power and remove the AC power to the power supply. Allow 30 seconds to ensure no standby power exists. Press and hold the Clear CMOS button for 3 seconds.

DOWNLOADING NZXT CAM

Download and install NZXT CAM from www.nzxt.com/camapp

REGULATORY NOTICES
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment onto an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
  Shielded interconnect cables and a shielded AC power cable must be employed with this equipment to ensure
  compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by the system’s manufacturer could void the user’s authority to operate the equipment.

Declaration of Conformity

I. This device complies with part 15 of the FCC rules. Operation is subject to the following conditions:

• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause undesired operation

II. This device is in conformity with the following EC/EMC directives:
EN 55022  Limits and methods of measurement of radio disturbance characteristics of information technology equipment
EN 61000-3-2 Disturbance in supply systems caused
EN 61000-3-3 Disturbance in supply systems caused by household appliances and similar electrical equipment “Voltage fluctuations”
EN 55024 Information technology equipment-immunity characteristics – Limits and methods of measurement
EN 60950 Safety for information technology equipment including electrical business Equipment

III. CE Conformity NZXT Inc, declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive.

IV. Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilieur du
Canada.
V. Korean Certification Mark
Includes a KCC (Korean Communications Commission) certification number:
KCC-R-R-ZXT-N7Z49XT.

BATTERY INFORMATION
European Union Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

California, USA The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate.

CAUTION(!)
There is a risk of explosion, if battery is incorrectly replaced. Replace with the same or equivalent type recommended by the manufacturer.

NZXT GLOBAL WARRANTY POLICY
This NZXT Global Warranty Policy governs the sale of products by NZXT to you.

I. WARRANTY LENGTH

Headset/Headphone Storage

| 2 Years
Mixer| 2 Years
Motherboards| 2 Years
Power Supply| 10 Years
Kraken X/Z Coolers| 6 Years

Mini ITX Case with PSU, AIO, and Riser Card

| 3-year warranty on case, riser card, and AIO.
10-year warranty on PSU.
Refurbished NZXT Product| Warranty Length for Parts
All NZXT Certified Refurbished Products| 1 Years

Any replacement product will be covered under warranty for the remainder of the warranty period or thirty days,
whichever is longer. Proof of purchase is required for warranty service.

II. WHO IS PROTECTED
The Warranty covers only NZXT products purchased by the original consumer.

III. WHAT IS AND IS NOT COVERED
Please note that our warranty is not an unconditional guarantee. If the product, in NZXT’s reasonable opinion,
malfunctions within the warranty period, NZXT will provide you at its sole discretion with a repaired or replacement product, either new or refurbished, with a similar function that is equal or greater in value depending on supply. Our warranty does not cover the following:

• any product or serial number/warranty sticker modification applied without permission from NZXT;

• any damage that is not a manufacturing defect;

• damage, deterioration or malfunction resulting from: accident, abuse, misuse, neglect, fire, water, lightning, or other acts of
  nature, unauthorized product modification or failure to follow instructions included with the product;

• improper installation, unauthorized alterations or modifications, or repair or attempted repair by anyone not authorized by NZXT;

• shipping or transport damage (claims must be made with the carrier);

• normal wear and tear.

NZXT does not warrant that this product will meet your requirements. It is your responsibility to determine the
suitability of this product for your purpose. For NZXT Store orders, we cover two way return shipping for all
exchanges and returns. For all other authorized dealers, NZXT Support does not cover return shipping and only
covers one way shipping from NZXT back to the end user for exchanges. Two way expedited shipping is provided for all PSUs covered under the Less Than Three program, indiscriminate of purchase location, provided the location is an approved NZXT reseller.

IV. EXCLUSION OF DAMAGES (DISCLAIMER)
NZXT’s sole obligation and liability under this warranty is limited to the repair or replacement of a defective product with either a new or refurbished product with a similar function that is equal or greater in value at our option. NZXT shall not, in any event, be liable for any incidental or consequential damage, including but not limited to damages resulting from interruption of service and loss of data, business, or for liability in tort relating to this product or resulting from its use or possession.

V. LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty length specified in Paragraph I.

VI. TO OBTAIN TECHNICAL SUPPORT
If you have already referenced your product owner’s manual and still need help, you may contact us by phone at +1 800-228-9395, by email at service@nzxt.com, or visit the NZXT Support site at nzxt.com/customer-support.

VII. HOW TO OBTAIN A WARRANTY SERVICE FROM NZXT
To receive a warranty service for your product when purchased directly from NZXT, you must submit a request via the NZXT Support site outlining the problem. If a technician deems the product defective or requiring testing, you will be required to provide a copy of your proof of purchase, which will enable you to submit a Return Merchandise Authorization “RMA” request. Once approved, you`ll receive an RMA number, upon which you will be asked to ship the defective item back to NZXT with the RMA number clearly marked or labelled on the package. NZXT recommends that appropriate measures are taken to safeguard the product from damage during shipping.

VIII. APPLICABLE LAW AND ADDITIONAL LEGAL RIGHTS FOR CONSUMERS
This warranty gives you specific legal rights. These conditions are governed and construed in accordance with
the laws of California (with exception of its conflict of law provisions), and the application of the United Nations
Convention of Contracts for the International Sale of Goods is expressly excluded. The non-exclusive jurisdiction of the courts of California is agreed, which means that you may bring a claim to enforce your consumer protection rights in connection with this Global Warranty in the country which you have your habitual residence where you may have additional rights. These rights may vary. For original consumers who are covered by consumer protection laws or regulations in their country, state, or province of purchase or, if different, their country, state, or province of residence, the benefits conferred by this warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations. To the extent that liability under such consumer laws can be limited, NZXT’s liability is limited, and its sole option, to repair or replacement, either new or refurbished, with a similar function that is equal or greater in value depending on supply.

In the United Kingdom:

• For NZXT products sold to customers in the UK, during the expected lifespan of your product your legal rights entitle you to the
  following:

  Up to 30 days: if your goods are faulty, then you can get an immediate refund.
  Up to six months: if your goods can’t be repaired or replaced, then you’re entitled to a full refund, in most cases.
  Up to six years: if your goods do not last a reasonable length of time you may be entitled to some money back.

• If the person seeking to rely on the guarantee is not the original consumer, the NZXT Warranty will cover the product in relation to that person provided that they are able to provide proof of the transfer of the benefit of the guarantee from the original consumer.

• The implied warranties under the Consumer Rights Act 2015 says that your goods must be as described, fit for all purposes for which such goods are usually supplied, and of satisfactory quality.

In the EU:

• If you are a consumer and have your habitual residence in the EU, you additionally enjoy the protection afforded to you by provisions that cannot be derogated from by agreement by virtue of the law where you have your habitual residence.

IX. WARRANTY SERVICE FROM RESELLERS
In the event that a warranty service is sought, you must provide proof of purchase (store receipt or invoice) in order to receive the service and if deemed necessary, repair or replacement product.

In North America:
Within the first 60 days after purchase, please return your product (or for power supplies installed within our
enclosures, just the failed power supply) to your dealer or reseller for a replacement. If the product is still within
warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (see above) for
assistance and instructions. NZXT will not accept returns without prior approval and an RMA number.

In Europe:
Within the first year after purchase, please return your product (or for power supplies installed within our
enclosures, just the failed power supply) to your dealer or reseller for a replacement. If the product is still within
warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (see above) for
assistance and instructions. NZXT will not accept returns without prior approval.

In Australasia:
Within the first two years after purchase, please return your product (or for power supplies installed within our
enclosures, just the failed power supply) to your dealer or reseller for a replacement. If the product is still within
warranty and you can no longer return it to your dealer, please contact NZXT Customer Support (see above) for
assistance and instructions. NZXT will not accept returns without prior approval.

The cost of shipping will be borne at the first instance by you; however, if the purchased item is defective, NZXT will reimburse reasonable postage or transportation of costs.

Outside North America, Europe, and Australasia:
If your product needs to be returned within the warranty period, please contact the retailer or distributor from whom you purchased the product.

X. NZXT.COM STORE RETURNS/EXCHANGE POLICY
Eligible products under this NZXT Warranty qualify for a full refund or exchange only with an authorized RMA number and if the item is returned to the NZXT.com store inventory within 30 days of purchase. Returns are not allowed beyond 30 days of the purchase date. The NZXT.com Store reserves the right to deny any return or exchange. Refunds will be credited to the original method of payment. To initiate a return, simply submit a request via NZXT support site.

Visit nzxt.com/warrant y and support.nzxt.com for information on warranty coverage and service

SUPPORT AND SERVICE
SUPPORT AND SERVICE
If you have any questions or problems with the NZXT product you purchased, please don’t hesitate to contact us using our support system. support.nzxt.com

Please include a detailed explanation of your problem and your proof of purchase. For comments and suggestions, you can e-mail
our design team, designer@nzxt.com. Lastly we would like to thank you for your support by purchasing this product.
For more information about NZXT, please visit us online. NZXT Website: nzxt.com

_ _NZXT N7 Z499 ATX Motherboard User Manual –Optimized PDF
NZXT N7 Z499 ATX Motherboard User Manual – Original PDF__

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>