K-VIT MIR005 LED Illumination Mirrors User Manual
- June 3, 2024
- K-VIT
Table of Contents
K-VIT MIR005 LED Illumination Mirrors
FINALLY, YOU WILL GET THE MOST OUT OF YOUR MIRROR
Thank you for making Reflections by K-VIT your everyday partner We know how special you are, so this product has been carefully crafted, meticulously inspected, and packaged before shipment just for you. Before start enjoying an amazing new experience in your room please read this guide and follow the instructions for a safe use
Lights on!
Use the sensor switch in your mirror to light your room and get ready to make
up.
Forget about foggy mirrors!
Once the mirror is lit up, the Demister will automatically prepare to warm up
the surface of your mirror clearing up the fog before you take shower.
Don’t look for extensions and plugs!
Using the charge station in the mirror to plug in your electric shaver and get ready for an amazing day, is simple and convenient.
Clear reflection and rust-proof!
This wonderful mirror is made of Copper-free coating, giving you a more
vibrant reflection and colors when used together with lighting. Plus its
coated technology keeps it safe from rust for a longer time than usual
mirrors.
IMPORTANT PRECAUTIONS
-
DO NOT lay the mirror on the tiled or concrete surface prior to installation. Preferably unpack the mirror at the moment of installation.
-
Do not take out the protective plastic until finished installation to prevent
chipping of the corners. -
Care must be taken before drilling pilot holes to avoid any existing wiring or pipe work that may be concealed. Confirm that the wall can support the weight of the mirror.
-
A certified electrician must perform all work.
-
This product shall be installed only in zone 2 of your bathroom according to regulations. this mirror is suitable for all other rooms’ use.
The Charge Station voltage is 220v recommended for electric shaver use mainly.