Shark IQ Robot Sharkclean App and Robot User Manual

QUICK START GUIDE

To stay current on our latest updates and features,

DOWNLOAD THE SHARKCLEAN™ APP.
Search “SharkClean” in the app store.

CONNECTING THE SHARKCLEAN™ APP AND ROBOT

Search SharkClean in the app store
and download to get started.

• Open the SharkClean app
  and set up your account.

• Hold down Dock and Clean
  buttons simultaneously
  until your Shark prompts
  you with audio, and Wi-Fi
  light ( ) on robot blinks

• Exit the app and open
  Wi-Fi settings.

• Select your robot (Ex. Shark_
  RVXXX) from the menu.

• Exit settings and return to
  the SharkClean app.

• Select your home Wi-Fi network
  and enter your password.
  NOTE: Most networks are 2.4 GHz. The
  app will not work on 5 GHz network.

• When pairing is complete, the
  Success screen will appear

• CAN’T CONNECT?
  Restart your phone

• Turn off phone, wait a few minutes, then
  turn it back on and connect to Wi-Fi.
  Reboot your robot

• Make sure the power switch on the
  back of the BASE is in the ON position.

• Press the power switch on the side
  of the robot to the OFF position.
  Wait 10 seconds, then press it to
  the (I) ON position.
  Reboot your router

• Unplug the router power cable for 30
  seconds, then plug it back in. Allow
  several minutes for your router to
  reboot completely.

• Two Easy Steps If You’re Stuck:
  Having trouble connecting to your
  robot? Call 1-888-228-5531 for robot
  support.
  For additional help, visit: sharkclean.
  com/support

• How-to Videos

• FAQs

• Troubleshooting

• Tips & Tricks
  Smart Home Setup
  To set up voice control using Google
  Home or Amazon Alexa, visit
  sharkclean.com/app for instructions.
  CAN’T CONNECT?
  Restart your phone

• Turn off phone, wait a few minutes, then
  turn it back on and connect to Wi-Fi.
  Reboot your robot

• Make sure the power switch on the
  back of the BASE is in the ON position.

• Press the power switch on the side
  of the robot to the OFF position.
  Wait 10 seconds, then press it to
  the (I) ON position.
  Reboot your router

• Unplug the router power cable for 30
  seconds, then plug it back in. Allow

SETUP

• Remove protective film from robot and base.

• Attach the side brushes to the posts on the bottom
  of the robot. The side brushes are located in the
  red packaging.

• Turn on the power by pressing the button on the
  side of the robot to the (I) ON position

Find a permanent location for the base. Place it
with its back against a wall, in an area with a good
Wi-Fi signal. Remove any objects that are closer
than 3 ft. from either side of the base, or closer
than 5 ft. from the front. For best results, set up
base on bare floor, or on the SharkMat

• Plug the base power cord into an electrical outlet.
• Turn the power switch on the back of the base to
  the (I) ON position.
  The green power indicator light on the base will
  illuminate when the base has power.

To charge, place robot with its BACK side against base.

• Turn power switches on BOTH robot and base to (I)
  ON position.

• When charging begins, robot will beep and BLUE charging
  indicator light on base will PULSE. When robot is fully
  charged, light will turn SOLID blue.
  NOTE: Every time the robot returns to the dock, it will make a
  loud noise as it empties debris. This is normal and no cause for

OPTIMIZING YOUR HOME FOR CLEANING

Clear cords and remove small objects like toys,
clothing, or drapes from floors. Open interior doors
in rooms you want your robot to clean. For best
results, run your robot in well-lit conditions.

WHAT TO EXPECT

As your robot learns your home, you may need to make some small adjustments to optimize performance

It will take you robot multiple runs to generate
your interactive map, so run it frequently to get the
best map.

For a constant state of clean™, set up a cleaning
schedule in the app.

While your robot is cleaning, do not pick it up
and move it, or move the charging base—this will
impact the robot’s ability to map your home.

During the first few weeks, your robot will empty
more often than usual. Check the fill level regularly.
Home environments vary, and the bin may fill up
quicker in some homes.

For best results, run your robot in well-lit
conditions. If you run your robot at night, keep
the lights on in the areas to be cleaned.

© 2020 SharkNinja Operating LLC. BOTBOUNDARY, SHARK, and SHARK IQ ROBOT are registered trademarks of SharkNinja Operating
LLC. CONSTANT STATE OF CLEAN, SHARKCLEAN, and SHARK IQ ROBOT SELF-EMPTY are trademarks of SharkNinja Operating LLC.
APPLE, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of
Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY,
the Google Play logo, and Android are trademarks of GOOGLE LLC.
AV1010AE_QSG_E_REV_Mv2 

Read More About This Manual & Download PDF:

Shark IQ Robot Sharkclean App and Robot User Manual – Optimized PDF
Shark IQ Robot Sharkclean App and Robot User Manual – Original PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>