banggood 2-IN-1 BLUETOOTH TRANSMITTER RECEIVER/WIRELESS AUDIO ADAPTER RX/TX Instruction Manual
- June 8, 2024
- banggood
Table of Contents
Instruction Manual
banggood 2-IN-1 BLUETOOTH TRANSMITTER RECEIVER/WIRELESS AUDIO ADAPTER
RX/TX
1. Product Introduction
This product is set to receive and launch, two-in-one Bluetooth device. This product is simple,which is able to launch and receive all the audio signal freely Through Bluetooth reception mode you can send the phone music to the traditional home audio equipment. It is more convenient to send TV, CD player MP3 or other sources to the Bluetooth speaker or Bluetooth headset through the product Bluetooth launch mode. Due to the low latency technology of the prodcut it also supports sound real-time transmission of online games, television and film. This product has built-in rechargeable battery, which has long battery life. It solves the limitations of audio equipment perfectly and extends a variety of audio equipment transfer function.
2. The main parameters of the product
- Bluetooth version: 4.2
- Bluetooth protocol support: A2DP and AVRCP
- Support multi-format decoding: MP3, WAV, WMA, APE, FLAC
- Transmission distance:> 20M (open place)
- Charge input voltage: DC 5V
- Power supply: 3.7V
- Power consumption: play in less than 20 mA, standby in 0.6-4.5 mA, shut down in 2 microamps
- Working time:> 10H
- Charging time: 2H
- SIGNAL NOISE RATIO: more than 95db
Support one to two: TWS function (Note: one to two means that two phones can connect one device. Connection sequence means play priority; TWS means 1 phone with two speakers, a left channel, a right Road. The left and right channel can be or not be separated) —–this function will be upgraded when software upgrade
Input/Output Connection: 3.5MM Stereo Earphone
Holder Compatibility: Receiver is compatible with Android system and IOS system of the brand of various models of mobile phone; transmitter is compatible with CSR, a Czech Republic, the network, the star micro, Ankai, RDA, Jianrong. Jie Li and other Bluetooth audio program.
3. Package list
- 2 in 1 Bluetooth machine x1
- Product specification x1
- USB charging cable x1
- 3.5MM audio cable x1
4. Charging
This product has built-in rechargeable battery for long standby and use. It is recommended that you fully charge before you use it for the first time.
- Plug one end of the Micro USB charging cable into the product charging port and the other end of into the standard USB power outlet (such as the phone charger, computer USB interface).
- Charging about 2 hours.
- The red light is on when charging, and the red light goes off after charging is complete.
- You can play music when charging. When the power is too low but you still want to use this product, you can enjoy the music while charging,
5. Functional Operation
Receiving mode: This product is powered on by default. The long-press key is tumed on, and the mobile phone Bluetooth is searched for this device “RX-TX – 10” pairing.
Launch mode: long press and tum on the key and start the Bluetooth device that needs to be paired. At the same time, press and hold the Receiver + and – buttons to switch to the transmit mode, which will automatically connect with the open Bluetooth device.
Read More About This Manual & Download PDF:
banggood 2-IN-1 BLUETOOTH TRANSMITTER RECEIVER/WIRELESS AUDIO ADAPTER RX/TX
Instruction Manual – Download [optimized]
banggood 2-IN-1 BLUETOOTH TRANSMITTER RECEIVER/WIRELESS AUDIO ADAPTER RX/TX
Instruction Manual – Download
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>