Zanussi Lindo 300 Manual: User Guide & Troubleshooting Instructions

The Zanussi Lindo 300 Washing Machine Manual is a comprehensive guide that provides users with all the necessary information they need to safely and effectively operate their washing machine. The manual contains detailed instructions on how to install and use the appliance, as well as important safety information that users must adhere to. It is essential that users read through the manual carefully before using the machine to avoid any injuries or damages. The manual covers a range of topics, including safety instructions for children and vulnerable people, general safety guidelines, electrical and water connections, product description, and daily use. Additionally, the manual includes a programme chart that outlines the standard programmes for the Energy Label consumption values, programme options compatibility, and consumption values. With this manual, users can be confident in their ability to use their Zanussi Lindo 300 Washing Machine safely and effectively for all their laundry needs.

User Manual

Zanussi Lindo 300 Washing Machine

PDF Manual for the Zanussi Lindo Dryer: Zanussi-Lindo-300-Dryer- Manual

 Safety information

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door when it is open.
• Cleaning and user maintenance shall not be made by children without supervision.

General Safety

• Do not change the specification of this appliance.
• Obey the maximum load volume of 9 kg (refer to the “Programme chart” chapter).
• The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa).
• The ventilation openings in the base (if applicable) must not be obstructed by a carpet.
• The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

Safety instructions

• Remove all the packaging and the transit bolts.
• Keep the transit bolts. When you move the appliance again you must block the drum.
• Always be careful when you move the appliance because it is heavy. Always wear safety gloves.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Do not install or use the appliance where the temperature is less than 0 °C or where it is exposed to the weather.
• Make sure that the floor where you install the appliance is flat, stable, heat resistant and clean.
• Do not install the appliance where the appliance door can not be fully opened.
• Make sure that there is air circulation between the appliance and the floor.
• Adjust the feet to have the necessary space between the appliance and the carpet.
• Do not install the appliance where the appliance door can not be fully opened

Electrical Connection

• The appliance must be earthed.
• Always use a correctly installed shockproof socket.
• Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not touch the mains cable or the mains plug with wet hands.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• Only for UK and Ireland: The appliance has a 13 amp mains plug. If it is necessary to change the fuse in the mains plug, use a 13 amp ASTA (BS 1362) fuse.
• This appliance complies with the E.E.C. Directives.

Water connection

• Make sure not to cause damage to the water hoses.
• Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean.
• The first time you use the appliance, make sure that there is no leakage.

Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance.

• Use this appliance in a household only.
• Obey the safety instructions on the detergent packaging.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Make sure that you remove all metal objects from the laundry.
• Do not put a container to collect possible water leakage under the appliance. Contact the Authorised Service Centre to ensure which accessories can be used.
• Do not touch the glass of the door while a programme operates. The glass can be hot.

Disposal WARNING! Risk of injury or suffocation.

• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.

Product description

Appliance overview

1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Rating plate
6. Feet for the appliance level

Installation on suspended flooring Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws, the wood panel must extend beyond the front feet. If possible install the appliance in one of the corners of the room, where the floor is more stable.

Control panel

Control panel description   Display

Programme Chart

1. Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these programmes are respectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton programme». They are the most efficient programmes in terms of combined energy and water consumption for washing normally soiled cotton laundry. The water temperature of the washing phase may differ from the temperature declared for the selected programme.
2. During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum doesn’t rotate or doesn’t rotate properly. Consider this as a normal functioning of the appliance.
3. No temperature indicator is on .

Programme options compatibility

1. When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton: 4,5 kg, synthetics and delicates: 2,5 kg.

Consumption values

The data of this table are approximate. Different causes can change the data: the quantity and type of laundry, the water and ambient temperature. At programme start the display shows the duration programme for the maximum load capacity. During the washing phase the programme duration is automatically calculated and can be greatly reduced if the laundry load is lower than the maximum load capacity (e.g. Cotton 60°C, maximum load capacity 9 kg, the programme duration exceeds 2 hours; real load 1 kg, the programme duration don’t reach 1 hour). When the appliance is calculating the real programme duration a dot blinks in the display.

1. At the end of spin phase.
2. For model ZWF 91283W.
3. For model ZWF 91483W.

Options

Settings

If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction.

Before first use

1. Put a small quantity of detergent in the compartment for washing phase.
2. Set and start a programme for cotton at the highest temperature without laundry.

This removes all possible dirt from the drum and the tub.

Daily use

WARNING Refer to Safety chapters. Loading the laundry Open the water tap. Connect the mains plug to the mains socket.

1. Pull the door handle to open the appliance door.
2. Put the laundry in the drum, one item at a time.
3. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. Refer to max. loads indicated in “Programme chart”.
4. Close the door.

CAUTION! Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. Using detergent and additives

1. Measure out the detergent and the fabric conditioner.
2. Carefully close the detergent drawer.

Detergent compartments Liquid or powder detergent The default position of the flap is A (powder detergent). To use liquid detergent:

1. Remove the drawer. Push the drawer edge in the place with the arrow (PUSH) to remove the drawer easily.                                                                
2. Adjust the flap in position B.                                                
3. Put back the drawer in the recess.

When you use the liquid detergent:

• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then 120 ml.
• Do not set the delay start.

When the flap is in position B and you want to use powder detergent:

1. Remove the drawer.
2. Adjust the flap in position A.
3. Put back the drawer in the recess.

• Measure out the detergent and the fabric conditioner.
• Put the detergent and the fabric conditioner into the compartments.
• Carefully close the detergent drawer.

Activating the appliance Press and hold for a couple of seconds the button to activate or deactivate the appliance. A tune sounds when the appliance is activated. The appliance performs a start up animation. The animation quickly shows each washing programme and the default temperature and spin settings. The display shows the word On. Setting a programme   Starting a programme without the Finish In option   Starting a programme with the Finish In option   Interrupting a programme and changing the options You can change only some options before they operate. Opening the door     At the end of the programme The washing programme is completed, but there is water in the drum: Draining the water:   AUTO-OFF option The AUTO-OFF stand-by option automatically deactivates the appliance to decrease the energy consumption. All the indicators and the display go off when :

Hints and tips

The laundry load

• Divide the laundry in: white, coloured, synthetics, delicates and wool.
• Obey the washing instructions that are on the laundry care labels.
• Do not wash together white and coloured items.
• Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first times.
• Button up pillowcases, close zippers, hooks and poppers. Tie up belts.
• Empty the pockets and unfold the items.
• Turn inside out multilayered fabrics, wool and items with painted illustrations.
• Remove hard stains.
• Wash with a special detergent heavy soil stains.
• Be careful with the curtains. Remove the hooks or put the curtains in a washing bag or pillowcase.
• Do not wash in the appliance laundry without hems or with cuts. Use a washing bag to wash small and/or delicate items (e.g. underwired bras, belts, tights, etc. ).
• A very small load can cause balance problems with the spin phase. If this occurs, adjust manually the items in the tub and start the spin phase again.

Stubborn stains For some stains, water and detergent is not sufficient. We recommend that you remove these stains before you put the items in the appliance. Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric. Detergents and additives

• Only use detergents and additives specially made for washing machines: – powder detergents for all types of fabric, – powder detergents for delicate fabrics (40 °C max) and woollens, – liquid detergents, preferably for low temperature wash programmes (60 °C max) for all types of fabric, or special for woollens only.
• Do not mix different types of detergents.
• To help the environment, do not use more than the correct quantity of detergent.
• Obey the instructions that you find on the on packaging of these products.
• Use the correct products for the type and colour of the fabric, the programme temperature and the level of soil.
• If your appliance has not the detergent dispenser with the flap device, add the liquid detergents with a dosing ball (supplied by the detergent’s manufacturer).

Ecological hints

• Set a programme without the prewash phase to wash laundry with normal soil.
• Always start a washing programme with the maximum load of laundry.
• If necessary, use a stain remover when you set a programme with a low temperature.
• To use the correct quantity of the detergent, check the water hardness of your domestic system

Water hardness If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener. To know the water hardness in your area, contact your local water authority. Use the correct quantity of the water softener. Obey the instructions that you find on the packaging of the product.

Care and cleaning

WARNING! Refer to Safety chapters. External cleaning Clean the appliance only with soap and warm water. Fully dry all the surfaces. CAUTION! Do not use alcohol, solvents or chemical products. Descaling If the water hardness in your area is high or moderate, we recommend that you use a water descaling product for washing machines. Regularly examine the drum to prevent limescale and rust particles. To remove rust particles use only special products for washing machine. Do this separately from the laundry wash. Always obey the instructions that you find on the packaging of the product. Maintenance wash With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a maintenance wash. To do this:

• Remove the laundry from the drum.
• Set the cotton programme with the highest temperature with a small quantity of detergent.

Door seal Regularly examine the seal and remove all objects from the inner part.   Cleaning the detergent dispenser   Cleaning the inlet hose and the valve filter Frost precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Do this procedure also when you want to do the emergency drain.

1. Disconnect the mains plug from the mains socket.
2. Remove the water inlet hose.
3. Remove the drain hose from the rear support and unhook it from sink or spigot.
4. Put the ends of the drain and inlet hose in a container. Let the water flow out of the hoses. 
5. When no more water flows, install the inlet hose and the drain hose again.

WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures.

Troubleshooting

  Possible failures After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. Service We recommend the use of original spare parts. When contacting the Authorised Service Centre, make sure that these data are available. You can find the information on the rating plate: model (Mod.), PNC (Prod.No.), Serial number (Ser.No.).

Technical Data

ENVIRONMENTAL CONCERNS

Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

www.zanussi.com/shop

SPECIFICATIONS

with E.E.C. Directives
Programme Chart| Standard programmes for Energy Label consumption values, programme options compatibility, consumption values
Installation| Flat, stable, heat resistant, clean floor; air circulation between appliance and floor; necessary space between appliance and carpet; appliance door must be fully opened
Usage| Household use only; obey safety instructions on detergent packaging; do not put flammable products or wet items near appliance; remove all metal objects from laundry; do not touch glass door while programme operates
Disposal| Disconnect from mains supply; cut off mains cable and discard; remove door catch to prevent injury or suffocation

FAQS

What age is it safe for children to use the Zanussi Lindo 300 Washing Machine?

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

What should I do if the supply cord is damaged?

If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.

How should I clean the appliance?

Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

Can I use multi-plug adapters and extension cables?

Do not use multi-plug adapters and extension cables.

How should I dispose of the appliance?

Disconnect the appliance from the mains supply. Cut off the mains cable and discard it. Remove the door catch to prevent children and pets to get closed in the appliance.

How should I prevent vibration when installing the appliance on suspended flooring?

To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws, the wood panel must extend beyond the front feet.

What should I do before first use?

Put a small quantity of detergent in the compartment for washing phase. Set and start a programme for cotton at the highest temperature without laundry. This removes all possible dirt from the drum and the tub.

How should I load the laundry?

Put the laundry in the drum, one item at a time. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. Refer to max. loads indicated in “Programme chart”.

How should I use detergent and additives?

Measure out the detergent and the fabric conditioner. Carefully close the detergent drawer.

  Read More About This Manual & Download PDF: Zanussi Lindo 300 Washing Machine – Download [optimized] Zanussi Lindo 300 Washing Machine Manual – Download Zanussi Lindo Dryer: Zanussi-Lindo-300 -Dryer-Manual  Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>