INSIGNIA NS-LED4RGB18 LED Tape Light Quick Setup Guide
- June 8, 2024
- Insignia
Table of Contents
Quick Setup Guide
INSIGNIA NS-LED4RGB18 LED Tape Light
PACKAGE CONTENTS
- LED tape light
- Double-sided tape
- Quick Setup Guide
FEATURES
- Premium LEDs produce 20 selectable colors
- Multi-step dimmer adjusts to the brightness level you want
- Self-adhesive backing attaches to TVs, cabinets, or other spaces for quick, custom lighting
- Reduces eye strain from TVs and monitors while enhancing image contrast
- Lights powered through USB (on your TV or computer) or with a USB power adapter (not included)
Before using your new product, please read these instructions to prevent any damage.
USING YOUR TAPE LIGHT
Shortening your tape light
- Use a pair of scissors to cut on a cut line. Cut lines are about 1.3 in. (3.3 cm) apart.
Warning: Do not cut the silver solder markings. Only cut in the center of the copper-colored pads, as shown.
Attaching your lights
- Peel the adhesive backing off the lights, then adhere the lights where you want them.
- Optional: Attach the double-sided tape to the back of the light control, then adhere it where you want it.
Connecting to power
- Place the tape light where you want it, then connect the USB connector to your TV, computer, or other USB power source.
Adjusting the lights
Note: If you turn off or unplug your tape light, it will remember your
last brightness and color settings.
SPECIFICATIONS
- Input: 5V DC, 1A
- USB power supply (not included): 5V DC, 0.5A minimum (1A or more recommended)
- Length: 4 ft. (1.2 m)
TROUBLESHOOTING
LEDs will not turn on.
- Press the power button to make sure your light is turned on, then press (BRIGHT) to increase the brightness.
- Make sure that your lights are connected to a working USB port or power outlet. If connected to a computer, turn on your computer.
LEDs flicker or turn on and off.
- Make sure that your lights are plugged into a working power outlet or USB port. Try plugging into a different power source.
- Make sure that the cable is not damaged.
SAFETY INFORMATION
- To avoid damage to the light strip, do not sharply twist or bend the light strip 90°.
- Do not cut the silver solder markings. Only cut in the center of the copper-colored pads.
- Do not plug in your lights when they are coiled. This can generate excess heat which can damage the product or connected device.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
Read More About This Manual & Download PDF:
INSIGNIA NS-LED4RGB18 LED Tape Light Quick Setup Guide – Download
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>