INSIGNIA NS-HW550 Slimline Metal Surge Protector Quick Setup Guide

: June 8, 2024
: Insignia

Table of Contents

Slimline Metal Surge Protector
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QUICK SETUP GUIDE

Slimline Metal Surge Protector

NS-HW550

PACKAGE CONTENTS

Surge protector
Quick Setup Guide

OVERVIEW

Overview

FEATURES

Slim metal housing fits into tight spaces while providing maximum durability
540 J rating protects your electronics from power surges
Eight wide-spaced outlets easily fit large plugs
Two USB ports (2.4A total output) provide additional power options
6 ft (1.8 m) heavy-duty cord reaches where you need it
Circuit breaker with status light protects from power overloads
Integrated mounting bracket lets you easily attach to a wall, furniture, or other surfaces

USING YOUR SURGE PROTECTOR

Plug your surge protector into a standard (125V) wall outlet. If the protected LED
indicator doesn’t light, make sure that the power switch is in the ON position.
The power switch is inside a button cover to prevent the switch from accidentally turning on or off. To open the cover, firmly grasp the flap on the cover and pull up on the bottom corner (on the side closest to the top power outlet). To close the cover, push it down until it clicks into place. For your safety, do not use a metal object to open the cover.
Plug up to eight devices into the surge protector’s outlets. You may need to push firmly to insert the plug.
If needed, mount your surge protector using the mounting holes located on both ends of the surge protector.

UNDERSTANDING LED INDICATORS

Protected LED indicator: Lights to show that your devices are protected from power surges. If this LED doesn’t light, your surge protector cannot absorb additional power surges, and you need to replace your surge protector.

SPECIFICATIONS

Dimensions without power cord (L×W×H):
36.6 × 1.5 × 1.4 in. (930 × 40 × 37 mm) The length includes the attached mounting brackets.
Weight: 2.4 lbs (1.1 kg)
Plug style: USA 3 pin, 180° plug
Cord length: 6 ft. (1.8 m)
Total outlets: 8 AC and 2 USB
Surge suppression:
• Maximum energy dissipation: 540 joules
• Maximum surge current: 36,000 amps
Surge protection: 3 lines (L-N / L-G / N-G)
Clamping voltage: L-N / L-G / N-G = 500 volts each
EMI/RFI noise filtering: Up to 40 dB
Load rating: 15 amps (for all connected devices combined)
Line voltage: 125V AC @ 60 Hz
UL-1363 and UL-1449 certified

SAFETY INFORMATION

RISK OF ELECTRIC SHOCK – Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT “daisy chain” surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if correctly grounded outlets are not available.
DO NOT install this device if there is not at least 30 feet (10 meters) or more of wire between the electrical outlet and electrical service panel.
This device features internal protection that will disconnect the surge protective component at the end of its useful life, but will maintain power to the load – WHICH WILL BE UNPROTECTED. If you don’t want your equipment at risk, follow the manufacturer’s instructions for replacing the device.
DO NOT use in any circumstance that would affect the operation or reliability of life support equipment, any medical applications, or patient care.

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA

For customer support, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China

INSIGNIA NS-HW550 Slimline Metal Surge Protector Quick Setup Guide – Download [optimized]
INSIGNIA NS-HW550 Slimline Metal Surge Protector Quick Setup Guide – Download