INSIGNIA NS-GNS2PCD Pro Controller Charging Dock Quick Setup Guide
- June 8, 2024
- Insignia
Table of Contents
QUICK SETUP GUIDE
Pro Controller Charging Dock
NS-GNS2PCD
PACKAGE CONTENTS
- Charging station
- AC adapter
- Quick Setup Guide
FEATURES
- Keeps your Nintendo Switch Pro controllers charged and ready for play
- Compatible with Nintendo Switch Pro Controllers
- Includes 4 ft. (1.2 m) cable
- Charges two controllers at once
- Weighted base for stability
SETTING UP THE CHARGING STATION
CAUTION: Do not use your charging station to charge a tablet. You many damage the tablet. Plug the AC adapter into a wall outlet, then plug the other end into the charging station. Your charging station will turn on and is now ready to charge your controllers.
CHARGING YOUR CONTROLLERS
Set your charging station on a flat surface, then gently push your controller
down onto your charging station’s connector as shown below. The LED indicator
lights red when the controller is correctly seated.
Note: Do not use excess force to connect your controller.
REMOVING YOUR CONTROLLERS
When the LED turns green, hold your charging station down and lift your controller up and off.
SPECIFICATIONS
Dimensions (H×W×D): 6.1 × 2.8 × 2.2 in. (15.5 × 7.2 × 5.5 cm)
Input:
Charging station: DC 5 V
AC adapter: AC 100-240 V ~ 50/60 Hz 0.2 A
AC adapter output: DC 5 V 1.0 A
Cable length: 4 ft. (1.2 m)
Operating temperature: 41° F ~ 95° F (5° C ~ 35° C)
SAFETY INFORMATION
- You must use the included AC adapter to power the charging station.
- Do not disassemble any of the components. Refer all services to qualified personnel only.
- Do not place or store the product in a humid area and do not expose it to water or rain.
- Use the product only as instructed. Read all instructions before operating the product.
- Failure to follow these directions may void the warranty.
LEGAL NOTICES
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device
must accept any interference received, including interference that may cause
undesired
operation.
WARNING: Changes or modifications to this unit not expressly approved by
the
party responsible for compliance could void the user’s authority to operate
the equipment. This equipment has been tested and found to comply with the
limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
it is not
installed and used in accordance with the instructions, may cause harmful
interference
to radio communications. However, there is no guarantee that interference will
not occur
in a particular installation. If this equipment does cause harmful
interference to radio or
television reception, which can be determined by turning the equipment off and
on, the
user is encouraged to try to correct the interference by one or more of the
following
measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. -
Consult the dealer or an experienced radio/TV technician for help.
ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet apparel numérique de la classe B est conforme à la norme NMB-003 du
Canada.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
Made in China
INSIGNIA NS-GNS2PCD Pro Controller Charging Dock Quick Setup Guide – Download