Bissell 8806 Series Power Steamer User’s Guide

Bissell 8806 Series Power Steamer User’s Guide

Thanks for buying a BISSELL Power Steamer

We’re glad you purchased a BISSELL Power Steamer deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Power Steamer is well made, and we back it with a limited oneyear warranty. We also stand behind it with a knowledgeable, dedicated
Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your PowerSteamer . Thanks again, from all of us at BISSELL.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your PowerSteamer®

WARNING: To reduce the risk of fire, electric shock, or injury:

■ Do not immerse.
■ Use only on surfaces moistened by cleaning process.
■ Always connect to a properly grounded outlet.
■ See Grounding Instructions.
■ Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
■ Do not leave machine when it is plugged in.
■ Do not service machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized Service Center.
■ Use indoors only.
■ Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces.
■ Do not carry the appliance while in use.
■ Do not unplug by pulling on cord. Unplug by grasping the plug, not the cord.
■ Do not handle plug or appliance with wet hands.
■ Do not put any object into appliance openings, use with blocked opening, or restrict air flow.
■ Do not expose hair, loose clothing, fingers or body parts to openings or moving parts.
■ Do not pick up hot or burning objects.
■ Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.
■ Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors.
■ Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, gasoline, etc.).
■ Do not modify the 3-prong grounded plug.
■ Do not allow to be used as a toy.
■ Do not use for any purpose other than described in this User’s Guide.
■ Do not operate the appliance unless the belt door is securely assembled in the location provided.
■ Use only manufacturer’s recommended attachments.
■ Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage. See the cleaning fluid section of this guide.
■ Keep openings free of dust, lint, hair, etc.
■ Do not point attachment nozzle at people or animals
■ Keep appliance on a level surface.
■ Turn off all controls before unplugging.
■ Unplug before attaching the TurboBrush.®
■ Be extra careful when cleaning stairs.
■ Close attention is necessary when used by or near children.
■ WARNING: The Power Cord on this product contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Wash hand after handling.

SAVE THESE INSTRUCTIONS. GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is
properly installed and grounded in accordance with all local codes and ordinances.

WARNING:
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for
use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the drawing above. Make certain that the appliance is connected to an outlet
having the same configuration as the plug. No plug adapter should be used with this appliance.

Product view

Optional Accessories:

These items are available for purchase to use with your model. To order replacement parts or additional tools or
formulas, please refer to page 19.

Product view

BISSELL Formulas:

How to Use this Guide

This user’s guide has been designed to help you get the utmost satisfaction from your BISSELL PowerSteamer. You’ll find assembly and operating
instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assembling your deep cleaner.

Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and
where they go. Following this user’s guide will greatly enhance your ability to get the most performance from your BISSELL PowerSteamer for many years.

Your PowerSteamer comes in two, easy to assemble components: Handle assembly Lower body The only thing you will need to assemble your cleaner is a Phillips head screwdriver.

Assembly

1. Slide the handle assembly down into the lower body until it will go no further.

2. Secure the handle by placing one (1) Phillips head screw (supplied) through the screw opening in the lower body and into the rear of the handle assembly. Tighten with screwdriver until secure.

3. Wrap power cord and flex hose as shown. PowerSteamer assembly is now complete.

Special Features of Your BISSELL PowerSteamer

Your BISSELL PowerSteamer is a home cleaning system that uses a combination of hot tap water, BISSELL advanced cleaning formula and suction
to safely clean carpets and upholstery.

DirtLifter® PowerBrush

The DirtLifter PowerBrush is designed to enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights. When the power is ON ( I ) and the machine is in the upright position, your carpet is protected because the brushes are lifted up off the carpet.

SmartMix®

The SmartMix feature automatically mixes hot tap water with the BISSELL advanced cleaning formula. Simply choose one of the 3 settings (high traffic, normal, or water rinse) and the PowerSteamer will adjust the right amount of cleaning solution to mix with the water to fit your cleaning need.

Having a separate solution tank from the water tank allows no waste of formula. Because the water and solution are stored separately, they are not mixed until you are
ready to clean. When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time!

2-in-1 water tank

Our 2-in-1 water tank system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty
and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate.

This allows the user to maximize tank space, yet only carry one tank to and from the sink for emptying and filling.

Special Features of Your BISSELL PowerSteamer

Flow indicator
This is located on the machine base. It spins when the trigger is pressed to indicate that the machine is applying cleaning solution to the carpet and will stop spinning when the SmartMix tank or Bladder needs to be refilled, or when the

trigger is released.
Note: Flow Indicator does not spin when spraying through the attachment hose.

Ready tools dial
This provides either floor cleaning or above the floor cleaning with the flip of a switch. If choosing above floor cleaning for upholstery,
stairs, or along the baseboards, choose the attachment appropriate for the job. Attach tool to the hose, and you are ready to go!

Operation

1. Plan activities to give your carpet time to dry.

2. Move furniture to another area if cleaning an entire room (optional).
   

3. Thoroughly vacuum area with a dry vacuum cleaner before deep cleaning.

4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit.

5. Pretreating (optional)
   Note: Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways.
   A. Spray the BISSELL Tough Stain Pre-treat formula onto heavy traffic areas, soiled areas, or stains.
   B. Allow to penetrate for at least 3 minutes.
   C. Following the instructions below, clean as normal, using the BISSELL PowerSteamer machine on the high traffic setting.

ATTENTION:
Some Berber carpets have a tendency to fuzz with wear. Repeated strokes in the same area with an ordinary vacuum
or deep cleaner may aggravate this condition. Please see stain removal instructions on page 14.

Operation

Fill the 2-in-1 water tank

1. Release the handle and lay the machine handle back to access the tank.

2. Remove the tank from the base of the machine by lifting the tank carry handle.

3. Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Lift off and set the lid aside.

4. Fill up the bladder with clean hot tap water. *Do not boil or microwave water as it can destroy the bladder.

5. Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid.

Note: Remember to secure the lid and test to make sure it is secure before picking up the tank.

6. Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position. Bring machine handle back into upright position.

Fill the SmartMix/formula tank

1. Lift the formula tank up and out of the machine base. 2a. To fill the formula tank, first unscrew the cap and remove straw insert. Always use genuine BISSELL

formulas to maximize cleaning and for the safety of your machine. Fill formula up to the line and replace the cap and insert. Place formula tank back into the base of machine, making sure it is seated securely.

2. a. If using the BISSELL 3X Concentrated Fiber Cleansing Formula: Add 3 capfuls of 3X Concentrated Fiber Cleansing formula to the formula tank, and then fill
   with hot water to the line.

Note: If bottle leaks, check for proper positioning of red gromment and straw insert.

WARNING:
To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.

Operation

Choose the SmartMix setting Simply choose one of the 3 settings

• High traffic
• Normal
• Water rinse

and the PowerSteamer will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need.
NOTE: When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time!
Set ReadyTools dial
Set ready tools dial to the floor cleaning setting.

Power switch

1. Plug into a proper outlet and turn the power switch to the ON ( I ) position. The switch is found on the back of the handle.

Cleaning strokes

1. While pressing the trigger, make one slow forward wet pass and another one back. Let the formula and DirtLifter PowerBrush do the work for you.
   Caution: Do not overwet. Take care not to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure.

2. Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water, and aid in drying. Repeat cleaning
   passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you can’t see any more water being pulled up.
   NOTE: Both the SmartMix tank and the clean water tank must have liquid in them in order for the machine to spray. If one tank is empty the machine will not apply
   cleaning solution or water.

3. After cleaning, you may want to turn the SmartMix dial to rinse to give your carpeting a final water rinse rinse. This will ensure thorough removal of embedded dirt loosened by the deep cleaning formula. BISSELL deep cleaning formulas contain an anti-resoiling agent that helps your carpets repel dirt and keeps them looking good longer.

WARNING:
To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.

Operation

Empty the 2-in-1 water tank

1. Remove the 2-in-1 water tank from the base using the tank carry handle. Carry the tank like a bucket to a utility sink or outside where you will dispose of the
   collection water. Remove the top of the tank by rotating the handle forward to unlatch lid and lifting lid off tank.

2. Empty collection water from bottom of tank.
   NOTE: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been
   deep cleaned before). This debris should be picked up and thrown away.

3.  After each use, remove and rinse the lint screen located on the tank lid.

4. Refill the tank in tank by referencing “Fill the 2-in- 1 water tank” on page 9. Remember to secure the top of the tank by rotating the handle and test to make sure it is secure before picking up.

5. Return 2-in-1 water tank to the machine.

NOTE: Always check the level of cleaning formula in the SmartMix tank at the same time, and refill as needed.

Rinse (optional)

Rinsing is an optional step that can be done during the cleaning process by switching to the water rinse setting, or it can be done after the
carpeted area has been cleaned.

1. Simply choose the water rinse setting on the SmartMix dial, and follow the same path as you did for cleaning, taking care to do a forward (wet)
   stroke by depressing the trigger, a backward (wet) stroke, and a forward and backward (dry) stroke, releasing the trigger. Continue this until the water
   you see coming up the nozzle is clear.

Maintenance and care

Machine storage
Once your cleaning is complete, make sure the 2-in-1 water tank is emptied and rinsed out. Put the unit away in a closet or basement for the next
use. The SmartMix tank can remain filled and ready to go (store with machine set to water rinse setting), or it can simply be emptied back into the
formula bottle if that is more convenient.
Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components
and void the warranty.

Machine care
For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete.

1. Turn power switch OFF ( 0 ). Unplug the machine and wrap the power cord.

2. After emptying the 2-in-1 water tank, rinse it out at a faucet with running hot tap water, taking care to clean underneath the heavy duty bladder, and all around it. Clean out lint trap.
   

3. Replace the 2-in-1 water tank on the machine.

4. Clean out the flow indicator filter each time it is used to ensure best cleaning performance. Unscrew the flow indicator cap, lift out the red rotor and white filter. Rinse all three parts with water. Replace the filter and rotor. Replace the flow indicator cap. Turn until snug, do not over-tighten.

5. Any loose hair or debris can be pulled from the brush roll if desired and thrown away.

6.  Wipe the machine’s exterior with a soft cloth.

7. After carpet is dry, vacuum again to remove hair and fuzz.

Maintenance and care

Your PowerSteamer machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more.

1. Important! If using to clean Upholstery, check Upholstery Tags.
   A. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your PowerSteamer. If the tag is coded with an “X” or an “S” (with a diagonal stripe through it), or says “Dry Clean Only”, do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturer’s tag is missing or not coded, check with your furniture dealer.
   B. Check for colorfastness in an inconspicuous place.
   C. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.
   D. Plan activities to allow upholstery time to dry.
   E. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds.

2. Follow the instructions on page 9 for filling the 2-in-1 water tank and the formula tank.

3. Set ready tools dial to the tools or pretreat setting. This will allow spray and divert the suction to the hose.

4. Set SmartMix dial to normal.

5. Attach the cleaning tool to the end of the hose.

6. Plug in and turn on the power switch.

7. Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release
   the trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed. Caution: Do no overwet.

8. When cleaning is complete, remove and rinse tools in clean, running water.

9. Wrap hose around the tool caddy.

10. Empty 2-in-1 water tank and rinse out, following the instructions on page 11.

11.  Return ready tools dial to floor cleaning.

Maintenance and care

Keep plenty of genuine BISSELL advanced cleaning formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.

Stain Removal

Do not delay! Attending to an accident soon after it occurs ensures the chances for full removal. Leaving it for an extended period of time may
cause it to set and become permanent.

1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse.

2. Gently scrape up any semi-solids with a spoon or spatula. Do not use a knife or other utensil with sharp edges because it could damage the carpet
   or upholstery.

3. If the area has dried, remove the remaining semi-solids and residue with a sweeper or vacuum.

4. Be sure to test any spot removal formulas in an inconspicuous area first. This is important as some dyes and materials could be damaged or discolored
   by cleaning solvents. If such a change should occur, try a different solution or call a professional.

5. If cleaning on Berber carpeting, gently run your machine over a hidden area. If no fuzzing occurs, continue cleaning in soiled area.

6. Using the BISSELL Tough Stain PreCleaner, spray evenly over soiled area. Do not overwet. Wait 3-5 minutes. Gently work the solution by blotting area
   with a clean, damp, color safe cloth.

7. Clean using either the floor cleaning, or tools or pretreat setting on the ready tools dial.

Maintenance and care

Hard floor cleaning Your PowerSteamer model may have come with a hard floor attachment and Hard Floor Solutions Formula. If not, these products are available for
purchase by contacting the BISSELL Consumer Services department by phone or on the website. The hard floor tool provides effective cleaning for
linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors.

1. Vacuum or Sweep thoroughly to pick up any loose Adebris and pet hair.

2. Move any furniture, if needed.
   

3. Empty any carpet cleaning formula back into the BISSELL bottle if stored in the formula tank. Fill formula tank with BISSELL Hard Floor Solutions,
   available at many retailers, or contact BISSELL Consumer Services.

4. Fill the 2-in-1 water tank with hot tap water and set aside.

5. Attach the hard floor tool onto the floor nozzle with the long tab to the right side of the floor nozzle. First attach left side (short tab) catching tab over nozzle
   edge. Gently bend long tab (right side) outward to easily snap over edge of clear nozzle on left.

6. Set the ready tools dial to floor cleaning.

7. Set the SmartMix dial to normal clean.

8. Plug into an outlet and turn the power switch ON ( I ).

9. Slowly move the machine forward and back over bare floor surface one time while pressing trigger. Caution: Do not overwet.

10. Repeat the motion without pressing the trigger. This allows the hard floor tool to squeegee and suction up the dirty water.

11. Allow approximately 30 minutes for floors to dry.

12. Remove hard floor tool and rinse and dry before storing.

13.  If any formula remains in the formula tank, pour it back into the Hard Floor Solutions bottle for use the next time.

14. Rinse out the formula tank.

Reduced spray or no spray. Possible Cause

1. Bladder may be empty. 1. Refill bladder with hot tap water.
2. SmartMix tank may be empty. 2. Fill with BISSELL advanced cleaning formula.
3. The filter may be clogged. 3. Clean out flow indicator filter, page 12.
4. Tanks may not be seated properly. 4. Turn power OFF (O); remove & reseat tanks.
5. Pump may have lost prime. 5. Turn power OFF (O); after 1 minute turn ON and press Trigger.
6. The pump belt may be broken.
   

Remedies

1. Refill bladder with hot tap water.
2. Fill with BISSELL advanced cleaning formula.
3. Clean out flow indicator filter, page 12.
4. Turn power OFF (O); remove & reseat tanks.
5. Turn power OFF (O); after 1 minute turn ON and press Trigger.
6. Turn the machine OFF (O) and unplug from the outlet. To check if a pump belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the belt access door to release the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for breakage. You should be able to see the pump belt looped around the motor shaft. If it is broken or missing, please refer to Replacement Parts on page 19 before calling Consumer Services. Complete installation instructions will accompany the replacement belt.

Troubleshooting

DirtLifter PowerBrush does not turn.
Possible Cause

1. The Brush Belt or Pump Belt

Cleaner not picking up solution.

1. Ready tools dial may be on the wrong setting for the cleaning job.
2. Nozzle window may not be properly attached.
3. 2-in-1 water tank lid is not properly installed.
4. 2-in-1 water tank is not properly seated.
5. Poor tool position. (Hand held attachments only).
6. 2-in-1 water tank has picked up  maximum dirty water.

Remedies

1. Set ready tools dial to either or tools or pretreat floor cleaning.

2. Press down firmly on the black properly attached. oval gasket at the top window to make sure the two tabs on the back of the nozzle window are
   snapped into the mating slots in the main housing.

3. Re-install lid; refer to page 9.

4. 2-in-1 water tank must be firmly seated to function; remove and reseat 2-in-1 water tank.

5. Adjust angle; apply more  downward pressure.

6. Empty 2-in-1 water tank, refer to  page 11.

BISSELL Consumer Services

For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday – Friday 8 a.m. — 10 p.m. EST
Saturday 9 a.m. — 8 p.m. EST
Or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services

Or visit the BISSELL website – www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number:
Please record your Purchase Date:

NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event
of a warranty claim. See “About Your Warranty” on page 20 for details.

Please register your new BISSELL product at www.bissell.com/ productregistration

Read More About This Manual & Download PDF:

Bissell 8806 Series Power Steamer User’s Guide – Download [optimized]
Bissell 8806 Series Power Steamer User’s Guide – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>