Bissell 1865 Series Steam N Clean II User’s Guide

steam ‘n CLEAN® II
USER’S GUIDE 1865 SERIES

Thanks for buying a BISSELL Steam ‘n Clean II

We’re glad you purchased a BISSELL Steam ‘n Clean II. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.
Your Steam ‘n Clean II is well made, and we back it with a full one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high-quality homecare products like your Steam ‘n Clean II.
Thanks again, from all of us at BISSELL.

Mark J. Bissell
President and Chief Executive Officer

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including the following:
Read all instructions before using your
STEAM ‘N CLEAN® II.
WARNING :
■ Do not direct steam at people, animals, or electrical outlets.
■ Do not expose to rain
■ Store indoors
■ Use only extension cords UL-rated at 15 amperes
■ Unplug from outlet when not in use and before conducting maintenance or troubleshooting
■ Do not leave steam cleaner unattended
■ Do not leave the steam cleaner connected to an electrical outlet when not in use
■ Do not switch the steam cleaner on or attempt to use it without water in the tank
■ Do not service steam cleaner when it is plugged in
■ Do not use with a damaged cord or plug
■ Do not use the steam cleaner if it has been dropped, damaged, left outdoors, or dropped into water
■ Do not handle steam cleaner with wet hands
■ Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, or expose cord to heated surfaces
■ Do not unplug by pulling on the cord
■ Do not put any object into appliance openings, use with blocked opening, or restrict airflow
■ Do not use the appliance in an enclosed space filled with vapor given off by oil, base paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
■ Do not allow to be used as a toy
■ Do not use on leather, wax polished furniture or floors, synthetic fabrics, velvet, or other delicate, steam-sensitive materials
■ Do not use for any purpose other than described in this User’s Guide
■ Use only manufacturer’s recommended attachments – use of attachments not provided or sold by BISSELL may cause fire, electric shock or injury
■ Fill with cool water only — do not add anything except for cool water or you will cause damage to the heating element and void your warranty
■ Turn off before unplugging
■ Unplug by grasping the plug, not the cord
■ Pay close attention when working around children
SAVE THESE INSTRUCTIONS.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet.
Do not change the plugin anyway.
INSTRUCTIONS FOR CIRCUIT INTERRUPTING DEVICE
This appliance is equipped with a Circuit Interrupting Device (C.I.D.) The C.I.D. shuts off the unit in potentially hazardous situations. The C.I.D. has Test  (Yellow) and Reset (Red) buttons which should be operated each time the unit is plugged in.
WARNING : No plug adapter should be used with this appliance. This model is for household use only.
CAUTION : To reduce the risk of injury from steam, never point product at people, animals, or electrical outlets.

CAUTION : Do not add anything except cool water or you will cause damage to the heating element and void your warranty.

How to use this guide

This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL Steam ‘n Clean II hand-held steam cleaner. You’ll find assembly and operating instructions of all cleaning tasks, safety precautions, pre-cleaning tips, maintenance, and troubleshooting instructions.
Pay particular attention to the parts diagram, assembly instructions, and part names. Familiarize yourself with the tools and how they are used. Following this  User’s Guide will greatly enhance your ability to get the most performance from your BISSELL Steam ‘n Clean II for many years.
Your Steam ‘n Clean II comes assembled and ready to use. The drawing on page 4 and part names may come in handy should you need to order apart.

How to use your BISSELL Steam ‘n Clean II

Water Tank

The Water Tank is the blue tank at the end of the Steam ‘n Clean II.

1. Remove the Tank by releasing the Tank Latch and sliding the Water Tank off the unit.
2. Remove the Water Fill Cap by grasping the tab on the Water Fill Cap and pulling it off the Water Tank.
3. Fill Water Tank completely with cool tap water,* and replace Water Fill Cap.
4. Reattach Water Tank sliding tank into position and latching into place.

• Note : You may substitute distilled or demineralized water for tap water. Doing so may reduce the need to change the Water Filter to just once a year.
  Do not add anything except cool water or you will cause damage to the heating element and void your warranty.

Water Filter
This filter removes minerals and other impurities from tap water, preventing water deposits from damaging your Steam ‘n Clean II. It should be replaced when the bright green grains turn dark blue in the whole filter except the last strip.
Power Cord
Unwrap Power Cord [with C.I.D. plug] completely before operating unit.
Circuit Interrupting Device (C.I.D.)
Because you will be using this product in wet environments, such as bathrooms, we have equipped this unit with this added safety feature. The C.I.D. shuts off the product in potentially hazardous situations. The C.I.D. has test (yellow) and reset (red) buttons which should be operated each time the product is plugged in.  In low lighting, you may see a “flash” from within the C.I.D. plug when the test (yellow) button is depressed. This is normal and indicates proper function. Simply press the reset (red) button.
Indicator Light
This will glow to indicate when tap water has been converted to steam, and the machine is ready to use.
Safety Lock
Slide forward to lock the Steam Switch OFF when the Steam ‘n Clean II is plugged in but not in immediate use. When ready to use, slide back to activate the Steam Switch.
Steam Switch
Push to release steam.
Pressure Relief Valve
Your steam cleaner is equipped with a pressure relief valve that will open if the steam nozzle is blocked. When the pressure relief valve opens, water will be released from the small outlet hole at the bottom of the unit (below the handle). If the release continues, turn off your steam cleaner, empty the Water Tank and call
BISSELL Consumer Services
1-800-237-7691
for repair/return instructions.

**Tools and Accessories

**

All tools attach the same way. Align the two notches on the tool you choose with the two tabs in the nozzle. Insert notches into tabs completely, then turn the  tool a half rotation clockwise until it locks. Always check to make certain the tool is fitted firmly before using.
2-Position Steam Applicator (A)
This tool has two positions. Use the compressed or “short” position for concentrated steam and the extended or “long” position for diffused steam.
Steam Concentrator (B)
Concentrates steam to clean small, hard-to-reach areas, or for intense steam cleaning of stubborn soil.
Steam Brushes (C)
Attach to the end of the Steam Concentrator for scrubbing stubborn soil. Color-coded for your specific use.
Triangle Steam Brush (D)
Attaches to the steam concentrator.
CAUTION : Before disconnecting a tool from the steam cleaner, make certain that steam is no longer coming from the nozzle. Use an oven mitt to remove tools,  or wait until they cool before removing.

Steam Cleaning Hard Surfaces

All Living Areas
Stubborn soil that resists traditional hot water, cleaning solutions and vigorous scrubbing can often be effectively removed with high-temperature steam. Baked- on-grease on the stovetop, dried fruit juice in the refrigerator, mildew or stubborn soap scum on sliding shower doors, gum on countertops — steam makes all these far easier to clean. Use your Steam ‘n Clean II to soften and remove stubborn dirt, grime, dry, hardened food, and other household soil from hard surfaces.  You can also use your steam cleaner to clean pet cages.*

• Note : Always remove pets before cleaning.

  1. Fill the Water Tank with cool tap water or distilled/demineralized water.
  2. Connect the C.I.D. plug to an appropriate outlet.
  3. Attach tool. For large surface steam cleanings such as countertops, basins, and sinks, use the 2 Position Steam Applicator. For smaller areas, use the Steam  Concentrator with/without the Steam Brush.
  4. When the green indicator light glows, slide Safety Lock back and press the Steam Switch to release steam. Steam continues to come out of the tool while the switch is pressed.
  5. Wipe the surface with a clean, dry cloth.

CAUTION : Keep the face and all exposed skin away from steam. Failure to do so may result in personal injury.
CAUTION : Thermal shock can shatter glass. Before cleaning the cold glass surface, carefully warm the surface by directing the steam jet on the glass from a  distance of no less than 4 – 6”.

Steam Cleaning Hard Surfaces

Kitchen/Bathroom/Nursery
Use your Steam ‘n Clean II regularly to clean sinks, countertops, toilet bowls, changing tables, diaper pails, and other hard, non-porous surfaces.

1. Fill the Water Tank with cool tap water or distilled/demineralized water.
2. Connect the C.I.D. plug to an appropriate outlet.
3. Attach a cleaning tool. For large surface steam cleaning, such as countertops, basins, toilets, bidets, crib surfaces, changing tables, or diaper pails, use the 2- Position Steam Applicator. For smaller areas, use the Steam concentrator with or without the Steam Brush.
4. When the green indicator light glows, slide Safety Lock back to activate the Steam Switch. Press switch to release steam. Steam continues to come out of the tool while the switch is pressed.
5. Wipe the surface with a clean dry cloth.
   Note : Steam will not remove stains from fabric or other porous surfaces.

Steaming / Freshening Clothes
Use your Steam ‘n Clean II to remove wrinkles from clothes, and “freshen” clothing that has been stored.

1. Hang clothing from a shower rod or clothes hooks using a sturdy clothes hanger.
2. Fill the Water Tank with cool tap water or distilled/demineralized water.
3. Connect the C.I.D. plug to an appropriate outlet.
4. Attach the 2-Position Steam Applicator, set to the extended or ‘long’ position for diffused steam.
5. When the green indicator light glows, slide Safety Lock back to activate the Steam Switch. Press switch to release steam. Steam continues to come out of the tool while the switch is pressed.
6. Treat clothing until wrinkles loosen. Use a clothes brush as you steam.

CAUTION : Never attempt this procedure while wearing clothing. Burns could result.

Other Uses
Your Steam ‘n Clean II is a very versatile tool. Use it to Give your houseplants a refreshing cool cloud mist by using the steam selector at 12” or more away from plants. Soften gum or adhesives for easier removal. Soften glazing putty on windows for easier removal.
Clean grills
Clean coolers.
Cleaning sink garbage disposals.
Clean exhaust fan reusable filters. (Always remove from the fixture before cleaning.

When You’re Done

1. Engage Safety Lock by sliding forward.
2. Unplug C.I.D. plug from the outlet.
3. Remove Water Tank, empty, then replace.
4. Store the steam cleaner in a clean, dry area.
   Note : You do not need to empty the Water Tank if you plan to use the steam cleaner within a matter of hours. For longer storage, always empty the tank.

Routine Maintenance

Replacing The Water Filter
If you fill your steam cleaner with normal tap water, it is essential to check the water filter and replace it when it is no longer effective. Change the filter when the bright green grains turn dark blue. If the filter is not changed at the appropriate time, calcium deposits will accumulate on the heating element, causing damage or reduced performance.
If you fill your steam cleaner with distilled or demineralized water, you may only need to change your filter once a year.

1. To replace your filter remove the Water Tank by unlatching and sliding out of position.

2. Remove the used Filter by sliding the filter toward the Tank Latch.
   CAUTION : Do not add anything except cool water or you will cause damage to the heating element and void your warranty.

3. Insert new filter by sliding the Filter along the bottom of the unit until the water outlet aligns with the inlet on the machine.

4. Replace Water Tank by sliding it into place and securing the latch.

Replacement Filter
Use only BISSELL Water filters in your BISSELL
Steam ‘n Clean II steam cleaner. To locate a retailer near you, or to place an order, call
BISSELL Consumer Services
1-800-237-7691
Monday – Friday 8 a.m. — 7 p.m. EST
Saturday 9 a.m. — 2 p.m. EST
Or visit our Website @ http://www.bissell.com

Troubleshooting

Water release from the safety valve.
Possible Causes-Remedies
Blocked Steam Nozzle-Turn off the steam cleaner, unplug the CID plug from the outlet. After the unit has cooled, clear blockage by inserting a paper clip into the brass spray tip.
Reduce steam or no steam.
Possible Causes- Remedies
Water Tank empty- Fill Tank
Depleted Water Filter- Replace filter
Damage to Heating Element- Call BISSELL Consumer Services
If suggested solutions for this or any function of your steam cleaner do not correct the problem, call BISSELL Consumer Services.
WARNING : To reduce the risk of fire, electric shock, or injury, unplug the appliance from the outlet before servicing.

BISSELL Consumer Services

For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday – Friday 8 a.m. — 7 p.m. EST
Saturday 9 a.m. — 2 p.m. EST
Or write :
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website – www.bissell.com
When contacting BISSELL, have the model number of unit available.
Please record your Model Number:
Please record your Purchase Date:
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See “About Your Warranty” on page 12 for details.

Replacement parts – BISSELL Steam ‘n Clean II

Item                   Part No.              Part Name
1                          018-5600            Water Filter
2                          018-5601            2-position Steam Applicator
3                          018-5602             Steam Concentrator
4                          018-5603              Steam Brushes (3)
5                          018-5604               Triangle Steam Brush
6                          018-5605               Water Tank
7                          018-5606                Water Fill Cap

©2001 BISSELL HOMECARE, Inc.
Grand Rapids, Michigan
All rights reserved. Printed in the USA.
Part Number 140-1867
Rev 7/01
Visit our website at:
www.bissell.com

Bissell 1865 Series Steam N Clean II User’s Guide – Download [optimized]
Bissell 1865 Series Steam N Clean II User’s Guide – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>