Bissell 3624, 2458, 2505, 2891 Series Spotclean Pro/ Little Green Pro User Guide
- June 8, 2024
- Bissell
Table of Contents
SPOTCLEAN PRO™ / LITTLE GREEN® PRO
3624, 2458, 2505, 2891 Series
Product Overview
1. Power Switch
2. Power Cord
3. Quick Release™ Cord Wrap
4. Dirty Tank
5. Dirty Tank Handle
6. Clean Tank Carry Handle
7. Clean Tank
8. Hose Grip
9. Spray Trigger
10. Hose Secure Latch
11. Flex Hose
Go online for a comprehensive walkthrough of your new purchase!
This guide has everything you need to get ready for first use, including
setting up, using and maintaining your machine, but online you’ll find
additional resources like tips and troubleshooting, videos, product
registration, parts, and more.
Go to support.BISSELL.com.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
When using an electrical appliance, basic precautions should be observed,
including the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:
» Connect to a properly grounded outlet only. See grounding instructions. Do
not modify the 3-prong grounded plug.
» Do not leave appliance when it is plugged in. Unplug from outlet when not in
use and before servicing.
» Do not expose to rain. Store indoors.
» Do not allow to be used as a toy. Close attention is necessary when used by
or near children.
» Do not use for any purpose other than described in this user guide. Use only
manufacturer’s recommended attachments.
» Do not use with damaged cord or plug. If appliance is not working as it
should, has been dropped, damaged, left outdoors, or dropped into water, have
it repaired at an authorized service center.
» Always install float before any wet pick-up operation.
» Do not pull or carry by cord, use cord as a handle, close a door on cord, or
pull cord around sharp edges or corners. Do not run appliance over cord. Keep
cord away from heated surfaces.
» Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
» Do not handle plug or appliance with wet hands.
» Keep appliance on a level surface.
» Do not put any object into openings. Do not use with any opening blocked;
keep openings free of dust, lint, hair, and anything that may reduce airflow.
» Keep hair, loose clothing, fingers, and all parts of body away from openings
and moving parts.
» Turn OFF all controls before plugging or unplugging appliance.
» Use extra care when cleaning on stairs.
» Do not use to pick up flammable or combustible materials (lighter fluid,
gasoline, kerosine, etc.) or use in areas where they may be present.
» Do not use appliance in an enclosed space filled with vapors given off by
oil-based paint, paint thinner, some moth-proofing substances, flammable dust,
or other explosive or toxic vapors.
» Do not use to pick up toxic material (chlorine bleach, ammonia, drain
cleaner, etc.).
» Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.
» Use only BISSELL® cleaning products intended for use with this appliance to
prevent internal component damage. See the Cleaning Formula section of this
guide.
» Do not carry the appliance while in use.
» Do not immerse. Use only on surfaces moistened by the cleaning process.
» Plastic film can be dangerous. To avoid danger of suffocation, keep away
from children.
SAVE THESE INSTRUCTIONS
THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER’S WARRANTY.
WARNING
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit and has a grounding attachment plug that looks like the plugin the illustration. Make certain that the appliance is connected to an outlet with the same configuration as the plug. No plug adapter should be used with this appliance.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it should
malfunction or break down, grounding provides a safe path of least resistance
for electrical current, reducing the risk of electrical shock. The cord for
this appliance has an equipment-grounding conductor and a grounding plug. It
must only be plugged into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Troubleshooting
Below are some of the issues you may run into. If you don’t see the issue you’re experiencing below, visit support.BISSELL.com.
Problem
|
Possible Cause
|
Remedies
---|---|---
Reduced/no spray
|
Clean Water Tank may be empty.
|
Refill tank.
Clean Water Tank may not be completely seated.
|
Turn power OFF. Remove and reseat tank.
Pump may have lost prime.
|
Hold end of hose below water level in tank to prime.
Loss of suction power
|
Tanks may not be completely seated.
|
Turn power OFF. Remove and reseat both tanks.
Dirty Water Tank is full.
|
Empty tank.
What’s in the Box?
Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.
|
|
---|---|---
Body
|
Tools (vary by model)
|
Sample Formulas (vary by model)
Filling the Formula Tank
Find more formulas at BISSELL.com.
Choosing Your Desired Formula
Always use genuine BISSELL® formulas in your machine. Other formulas may harm
the machine and void the warranty.
|
|
|
---|---|---|---
Clean + Protect
Removes deep-down dirt
|
PET Stain & Odor
Removes tough pet messes
|
PRO MAX Clean + Protect
Our most powerful formula for tough, ground-in dirt & stains
|
PET PRO OXY Urine Eliminator
Our best formula for tough pet messes
*2.5 fl. oz. of 2X concentrated formula is equivalent to 5.0 fl. oz. of non-concentrated formula.
Filling the Tank
|
|
---|---|---
1. Remove tank from the back of the machine by lifting the Clean Tank Carry Handle.
|
2. Unscrew the black cap and remove bottle insert.
|
3. Fill tank with hot tap water (140° F/60° C MAX) to the water fill line.
|
|
---|---|---
4. Add 60 mL/2oz of BISSELL formula to the tank.
|
5. Place bottle insert back into tank and tighten the black cap.
|
6. Place the tank back onto the machine.
Using Your Machine
To purchase additional tools or formulas, visit support.BISSELL.com.
Before You Clean
- Vacuum to remove loose dirt from area to be cleaned.
- Spray any BISSELL® stain pretreat formula to soiled areas or stains.
- Allow to sit for at least 3 minutes.
- Clean following instructions below.
Choose Your Desired Tool
Tools vary by model.
3” and 4” Tools Great for carpet stains, furniture and other hard-to- reach surfaces.
6” Tool Great for cleaning stairs and larger furniture areas.
Crevice Tool Best for narrow spaces and crevices that are hard to reach.
Deep Stain/Pet Stain Tool
Deep injection technology cleans the carpet from the bottom up to quickly and
thoroughly remove stains.
Stain Trapper Tool
Messes are collected and stored in a separate, removable container, keeping
pet and other liquid messes out of your machine.
Attaching and Using the Tool
|
|
---|---|---
1. Release the hose by twisting the secure latch.
|
2. Attach your desired tool to the Hose Grip until you hear a “click”.
|
3. Twist the Quick Release™ Cord Wrap and unwind the cord to plug into outlet.
|
|
---|---|---
4. Press the Power Button ON.
|
5. Point the tool approximately
1 inch above the spot or stain and press the Spray Trigger.
|
6. Release the Spray Trigger and use the bristles to scrub the area. To lift away the stain, apply downward pressure while moving the tool slowly toward you.
NOTE : When using the Deep Stain Tool, always keep the tool in direct contact with carpeting to avoid over-spraying.
Emptying the Stain Trapper Tool
(select models only)
|
|
---|---|---
1. To empty the tool, rotate the small tank on the bottom to unlock it.
|
2. Dump dirty water into a sink or toilet and rinse the tank out with clean water.
|
3. Replace the tank by lining up the locking teeth with their mating slots (make sure the two teeth that are closest together are pointed toward the brush). Turn the tank to lock it into place.
Emptying the Dirty Water Tank
We have additional tips for maintaining your machine at support.BISSELL.com.
|
|
---|---|---
1. When the Dirty Water Tank reaches the “FULL” line it is time to empty.
|
2. Remove Dirty Water Tank and carry to disposal area.
|
3. Unlock by rotating the handle up and over the back of the tank.
|
|
---|---|---
4. Remove lid and pour out dirty water. Rinse out tank to remove any debris.
|
5. Replace the tank lid and rotate the handle forward to lock back into place.
|
6. Before placing tank back into the machine, remove any debris from the red filter.
WARNING To reduce the risk of fi re, electric shock or injury, turn power
OFF before performing maintenance or troubleshooting.
WARNING When using the Deep Stain Tool, always keep the tool in direct
contact with carpeting to avoid over-spraying. Keep spray away from face.
Failure to do so may result in personal injury.
Cleaning & Storing Your Machine
For more helpful maintenance tips, check out support.BISSELL.com.
1. Remove and rinse the tools under clean, running water. Allow tools to dry.
2. It is recommended that you suction clean water from a bowl (or bucket) to rinse out the hose. Lift end of hose and stretch out to ensure all water is cleared.
3. Wrap and secure the Flex Hose and Power Cord.
NOTICE To reduce the risk of a leaking condition, do not store where freezing may occur. Damage to internal components may result.
Warranty
2-Year limited warranty may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information.
We’re Waggin’ Our
Tails!
BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save
homeless pets. When you buy a BISSELL product, you help save pets, too. We’re
proud to design products that help make pet messes, odors, and pet
homelessness disappear. Visit
BISSELLsavespets.com to learn more.
But wait, there’s more!
Join us online for a complete guide to your new product, including
troubleshooting, product registration, parts, and more.
Go to support.BISSELL.com.
©2019 BISSELL Inc. All rights reserved.
Printed in China. Part Number 1622493 12/19 RevA
Bissell 3624, 2458, 2505, 2891 Series Spotclean Pro/ Little Green Pro User
Guide – Download [optimized]
Bissell 3624, 2458, 2505, 2891 Series Spotclean Pro/ Little Green Pro User
Guide – Download