Arctic Accelero Xtreme IV Installation Manual
- June 8, 2024
- Arctic
Table of Contents
- Accelero Xtreme IV
- Accessories
- Remove Stock Cooler
- Insert screws in Mounting Plate
- Locate Hot Component Areas
- Install Thermal Pads On Heat Area
- Position Protective Film
- Mark **Down Hot Areas and Cut Openings
- **Assemble Both Heatsinks with Board
- Verify Protective Film Alignment
- Secure with Screws
- Add Clips
- Install Graphics Card
- Install Graphics Card Holder
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Accelero Xtreme IV
Dear Customer,
Thank you for choosing the Accelero Xtreme IV. Thanks to its patented back-
plate design, the Accelero Xtreme IV is the first upgrade GPU cooler offering
also excellent RAM and VR cooling and allows you to bring your graphics card
back into original state without leaving a scratch or a mark anywhere.
I hope you enjoy this GPU cooler and we at ARCTIC look forward to further enriching your life with our products. If you would like to share how you use ARCTIC’s products please do so at https://www.facebook.com/ARCTIC.en
ARCTIC is a fully carbon neutral company and your support helps us to compensate every kilogram of CO2 we produce.
Accessories
Remove Stock Cooler
Compatible models:
NVIDIA GeForce: GTX560 (Ti, SE), 550 Ti, 460 (SE)
NVIDIA GeForce: GTS 450, 250, 240
AMD Radeon: R9 285, R9 290(X), 270(X), R7 265, HD 8870, 7870 (XT, GHz),
7850, 6970, 6950, 6870, 6850, 6790, 5870, 5850, 5830, 4890, 4870, 4850, 4830,
3870, 3850, 3690
NVIDIA GeForce: GTX 980, 970, Titan (Black), 780 (Ti), 770, 760, 680,
670, 660 (Ti), 650 Ti boost
NVIDIA GeForce: GTX580, 570, 480, 470, 465
NVIDIA GeForce: GTX740
Note: This table is for reference only. Please refer to your actual Graphics card holes position during installation. Updated information is available at support.arctic.ac/AX4
Please ensure your graphics card does not come with a stacked power socket.
Insert screws in Mounting Plate
Locate Hot Component Areas
For Reference Only
HD 7870
For Reference Only
GTX 780
Install Thermal Pads On Heat Area
Hot Component Area
Graphics Card
- Hot Component
- Area Hot
- Component Foam
Position Protective Film
Mark **Down Hot Areas and Cut Openings
**
**Assemble Both Heatsinks with Board
**
Verify Protective Film Alignment
Secure with Screws
Add Clips
Install Graphics Card
Install Graphics Card Holder
Arctic Accelero Xtreme IV Installation Manual – Download
[optimized]
Arctic Accelero Xtreme IV Installation Manual –
Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>