ANZO Headlights Instructions Manual
- June 8, 2024
- ANZO
Table of Contents
ANZO Headlights Instructions
Tools Needed Phillips Screwdriver , 10mm Socket and
ratchet.
Remove the phillips screw holding the parking lamp
in.
Remove the 10mm bolt located on the bottom of the
light.
Remove the bolts from the top of the grille and the two phillips screws
located at the bottom corners.
Pull the parking lamp straight out. 
Pull the headlight straight out and unplug the harness from the back.
Remove the 10mm bolt from the top inner part of the light.
Remove the two 10mm nuts located behind the parking lamp.
Install your new light by reversing these instructions. Check all funtions of
the light before operating on the highway.
Details:
5150 Eucalyptus Ave Unit A Chino,
Ca. 91710
888.360.3696
Description: Crystal Headlight Part
Number: 121139 – 121132
Application: 97-00 Toyota Tacoma www.anzousa.com
ANZO Headlights Instructions Manual – Download
[optimized]
ANZO Headlights Instructions Manual – Download