imperii RR FIERRO SmartWatch Sport Woman IP67 Instruction Manual
- June 7, 2024
- imperii electronics
Table of Contents
imperii RR FIERRO SmartWatch Sport Woman IP67 Instruction Manual
INSTRUCTIONS FOR USING THE BRACELET
1. Feature page
1,1 Hour
1.2 Physical exercise
1.3 Step counter
1.4 Distances
1.5 Calories
1.6 Sleep test
1.7 Health
1.8 News
1.9 More
2. Descriptions of main functions
- Chip: NRF51822
- Bluetooth: 4.0
- Screen size: 0,961nches
- Pixels on screen: 128*64
- Compatible systems: Android 4.0 or higher, i0S 7 .0 or higher
- Duration: About 20 days In stand-by,5-7 days in use
3, Summary of use of the bracelet
3.1 Touch function
Activate the screen by touching the icon position, or press the button to
activate the screen and switch to the different interfaces.
In the main screen, by pressing the side key, you can choose different
interfaces.
3.2 Load
- The charging clamp can be charged normally by connecting it to the computer.
- When the bracelet is charging the screen shows the connection to the electrical network. When the battery icon is full on the screen, the battery is full.
3.3 Health data
By default, the pedometer and sleep monitoring functions are active. To
exercise, enter the exercise interface using the side key: the exercise mode
is divided into walking, running, cycling, hiking, swimming, football,
basketball and badminton; press the side key to exit.
For health mode, enter the interface using the side key, you will see Heart
Rate, Blood Pressure and Blood Oxygen.
System to measure heart rate: with the bracelet in contact with the skin, the
light will flash and start the frequency measurement.
To measure the pressure, when the light comes on, the test starts, you can
exit by pressing the side key. If the wristband is connected to the Bluetooth
APK. the pedometer/ sleep/ heart rate data will be synchronized automatically
with your mobile in real time, by clicking you can see your monthly health
data, and the APK synchronization interface.
- Pedometer: at 12 o’clock every night, the step data of the wristband will be cleaned.
- Sleep: you can configure the parameters of sleep monitoring from the mobile.
3.4 More
In the More {More) interface, with the side key you can enter the different
options (restore factory settings, off, two-dimensional code, stopwatch,
screen activation by hand movement and push messages): you can restore the
default settings,
You can turn off the bracelet, you can activate and stop the chronometer, the
illumination by hand gesture or the reception of messages.
3.5 Bluetooth connectivity
3.5.1 Downloading the App-Two methods
-
Download through a market of apps: Google Play for Android, App Store for iOS.
-
Download by scanning the two-dimensional code:
-
com.kct.fundo.btnotification_1.8.0_1403.apk [zip, android]
Android: You can scan the code through QQ WeChat or other scanning applications, it will send you directly to the download screen.
3.5.1 Downloading the App-Two methods (cont,) iO5:
You can scan the code through QQ, WeChat or other scanning applications, you
can use the QQ browser or Safari to send you directly to the download screen
(followed by a direct link to the App Store).
- Name of the App for Android: move
- Name of the App for i0S: move
- Icon after full installation:
3.6 Enter the applic:ation
Follow the following diagram:
3.7 Bluetooth connectivity
-
Once the wristband has been turned on, the Bluetooth is in the search state.
In the App, from the menu, click on More Options, click on connect device, click on search, and then choose to connect with the
Bracelet device. Click Connect and both devices will be paired. -
After a successful Bluetooth connection, the date and time of the wristband will be synchronized with the mobile. And from the application, you can click on Find Bracelet (Find Bracelet) so that the device vibrates, the screen Illuminates, and you see a warning icon on it.
-
Bluetooth automatic reconnection:
- If you went out of Bluetooth range without realizing it, open the App and the devices will reconnect automatically.
- Closing the application or restarting the phone and re-entering the App, the Bluetooth will reconnect as soon as it enters the Bluetooth range of the device.
4. OTHER FUNCTIONS
The following functions need Bluetooth connection with the mobile and the application started.
4.1 Notices
Notice of call, SMS, messages, etc. For example: activate call notification,
and when your mobile receives a call, the wristband will vibrate with the
illuminated display, and a call icon. Touch the button to stop the alarm.
4.2 Do not disturb
In Do Not Disturb mode, in addition to the alarm, you can eliminate light and
vibration for all warnings.
4.3 Alarm of sedentary lifestyle
You can set the time that this alarm will be active, and the time interval to
warn (in minutes) that the limit has reached and you must walk. When that
limit arrives, the bracelet vibrates and the screen lights up with an alert
icon.
4.4 Alarm cloc:k
From the App, click on Alarm Clock to set an alarm time. When that time comes,
the device will vibrate and the screen will light up with an alarm clock icon.
4.5 Reminder mode
You can set the reminder mode of your wristband.
Thus, when the wake-up alarm is activated or you receive a notification, you
can establish:
- Illuminated screen
- Vibration
- Illuminated Screen+ Vibration
4.6 Intelligent control by gestures
Select the arm on which you wear your bracelet{left/ right):
To illuminate the screen, raise the arm until the hand is level with the face,
with the wrist (and the screen) facing you.
4.7 Pairing devices
You can disconnect the wristband from your mobile from both devices. From the
wristband, in “more”-> “connect equipment”-> Disconnect. From the mobile,
unlinking the Bluetooth device.
IMPORTANT NOTICES
-
Supports Bluetooth 4, Android 4.3 or iOS 7 and higher versions.
-
Before activating the bracelet for the first time, please connect the charger and let it charge.
-
If you can not access the application, try to change your account, or login using Facebook or WhatsApp. Also check that there are no connection problems.
-
Bluetooth connectivity:
a. Make sure that the Bluetooth of the mobile and that of the wristband are turned on.
b. When you are searching for the Bluetooth device, make sure that the wristband is not linked to another device or mobile.
c. During the device search, if they are at the Bluetooth range limit there may be connection difficulties, bring the devices closer. -
If you can not activate the push notification button, please confirm that the application is running properly, and message notification is activated (an auxiliary function may be required).
-
If the movement, sleep and heart rate are not synchronized with the application, try disconnecting and reconnecting the Bluetooth connection.
-
If you want to link the wristband to another account, you must first unlink it from the account with which it is connected.
-
If the screen does not light up, please put the bracelet to charge.
imperii RR FIERRO SmartWatch Sport Woman IP67 Instruction Manual – Download
[optimized]
imperii RR FIERRO SmartWatch Sport Woman IP67 Instruction Manual –
Download
imperii RR FIERRO SmartWatch Sport Woman IP67 Instruction Manual – OCR
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>