MPOW M5 BH231A Bluetooth Headset User Manual
- June 7, 2024
- MPow
Table of Contents
MPOW M5 BH231A Bluetooth Headset User Manual
MPOW M5 BH231A Bluetooth Headset User Manual
Package
- Headset x 1
- Micro USB Cable x 1
- Charging Dock x 1
- Instruction Guide x 1
- Thank You Card x 1
Diagram
Specification
- Sensitivity – 120±3dB
- Standby Time – About 200 hours
- Charging Time – 2 hours
- Charging Input – 5V 500mA
- MIC Sensitivity – -42±3dB
- Talking Time – About 18 hours
- Headset Battery Capacity – 3.7V 180mAh
- Bluetooth Version – V4.1
The Charging dock can charge the headphone 12 to 15 times
Function Button
Charging
Connection With Two Devices
- Pair with your first device.
- Turn off the Bluetooth of the first device.
- Long press headset to enter into pairing mode and pair with your second device. The blue light will flash slovvly after successfully connected.
- Turn on the Bluetooth of the first device, and manually connect “hilpow M5” in the paired list After the Connection is successful, your headset is connected to the two Bluetooth deices at the same time (If the first device is the 10S, then you need to manually connect If it is Android, it can be a Automatica I ly connected.)
Win10 Compatibility Setting
Q&A
-
How to Pair if Failed?
In standby mode, hold the MFB and Volume+ button simultaneously for 5s to clear the pairing record, Then long-press the MFB until blue and red indicator light flashes alternatively to pair again. -
Any Password Needed when Paring?
If needed, please try 0000 or 8888, 1 1 1 1, 1 R34, -
How Can I Charge My Headset
You can charge it via the charging dock or USB cable. -
How to Restart the Headset if Failed?
Try to charge it via USB cable and then restart it
Warranty Information
Warranty & Support Mpow offers a 45-day money-back & 24-month worry-free
guarantee.
After-service Email: support@Ampow.com Mpow
Customer Service Phone 1-844-869-3583
FCC Statement
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
(3) This device has been evaluated to meet general RE exposure requirement.
The device can be used in portable exposure condition without restriction,
Note :
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications, However,
there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on. the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio riv technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
www.xmpow.com |
support@xmpow.com
MPOW TECHNOLOGY CO., LTD
Copyright 0 M POW Inc. Al I rights reserved.
FAQS
How do you pair Mpow bh231a headphones?
Pair with your first device. Turn off the Bluetooth of the first device. Long press headset to enter into pairing mode and pair with your second device. The blue light will flash slovvly after successfully connected.
Why the headset cannot be connected to the phone?
Check if the headset is in pairing mode, if not, long press the MFB for 5s to enter pairing mode. If still not connected, please check if the Bluetooth of your phone is turned on. If yes, please restart your phone and try again. Q: Why the voice is not clear when making a call?
Are Mpow headphones waterproof?
Waterproof. The Mpow Flame headphones are IPX7 waterproof certified , which means that they should still function even after being submerged in three feet of water or less.
Why the voice is not clear when listening to music?
Please check if your phone supports A2DP, if yes, please make sure that your phone’s volume is not too high.
Where are Mpow headphones made?
MPOW Technology Co., Limited. Supplier from China.
How do you put a Mpow in pairing mode?
Press the “MPOW” button for about 5 seconds until the LED begins flashing red and blue. Some Mpow headsets and speakers will go into pairing mode automatically when turned on, if not already paired to a device, and may just flash with a blue ligh
Why is my Bluetooth not connecting?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and choose Forget This Device for each device) then restart your phone or tablet.
Where is the power button on Mpow headphones?
It is the middle of the “3” that you are referring to. It’s great because all functions are on the same side. The middle button also acts as the “answer and hangup” button if you are choosing to connect to your phone.
Can wireless headphones explode?
he earphones connected through Bluetooth have the potential to explode. The wired earphones or headphones do not have any component that has the potential to explode, but the wireless ones have lithium-ion batteries that could generate ignition if they get overheated.
Why Bluetooth headphones keep disconnecting?
There may be too many apps running in the background of the device the Bluetooth is attempting to pair with. Certain applications cause interference with the connection, and some devices are limited in the number of applications that can run concurrently. If in doubt, check with the headset manufacturer.
Why does my wireless headset keep disconnecting?
A low battery can cause random disconnection of Bluetooth devices. If you are experiencing issues and know that you are within range of your paired device, check the batteries. This is a simple problem fixed by installing new or freshly recharged batteries.
Why the headset cannot be connected to the phone?
Check if the headset is in pairing mode, if not, long press the MFB for 5s to enter pairing mode. If still not connected, please check if the Bluetooth of your phone is turned on. If yes, please restart your phone and try again.
Why the voice is not clear when listening to music?
Please check if your phone supports A2DP, if yes, please make sure that your phone’s volume is not too high.
What happens when one earphone doesn’t work?
If a single earbud only cuts out occasionally, try twisting and taping the cord until sound comes through it again. If twisting the cord doesn’t work, you may need to open the earbud and solder the connection if you’re able to. In some cases, you may need to buy new earbuds
Do MPOW earbuds have a mic?
These headphones have integrated microphones inside each bud. The recording quality of the integrated microphone is passable and typical of most Bluetooth headphones.
Whats happened to Mpow?
Amazon has suspended over a dozen Chinese sellers for participating in fake review schemes. The list includes Mpow and Aukey, two of the biggest electronics Amazon-native brands out of China. The total sales by the suspended sellers eclipses $1 billion.
VIDEO
MPOW M5 BH231A Bluetooth Headset User Manual – Download
[optimized]
MPOW M5 BH231A Bluetooth Headset User Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>