MPOW MX1 User Manual

: June 2, 2024
: MPow

MPOW MX1 TRUE WIRELESS EARBUDS MODEL: BH480A

PACKING LIST

DIAGRAM

POWER ON

The earphones automatically turn on (with blue LED light flashing) and start pairing when you open the charging case.
In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on (with the blue LED light flashing).

POWER OFF

Put the earphones back in the charging case and close the case to turn them off.
If the earphones are not in the charging case, just press and hold the MFB of either earbud for 5 seconds to power them off. ( Mode 2 cannot be conducted during music playing or calling.)

PAIRING

Open the charging case, they will automatically enter the pairing mode in which the LED light flashes blue and red alternately, and then select “Mpow MX1”.
Note: The earbud will reconnect to the paired device by priority. If you want to pair to the second smartphone, please disconnect Bluetooth on the paired smartphone.

MUSIC

INCOMING CALL

MUSIC AND INCOMING CALL AND SIRI

Volume up/Down

Volume + : Press and hold the MFB button of Right earbud to turn up the volume increasingly.
Volume – : Press and hold the MFB button of Left earbud to turn down the volume decreasingly.

Next/Previous Track

Next Track: Triple-tap the MFB of Right earbud
Previous Track: Triple-tap the MFB of Left earbud.

Play/Pause

Double tap the MFB of either earbud.

Answer

Tap the MFB of either earbud once.

Mute

When you are having a phone call, you can tap eithr earbud once to mute or un-mute the earbud’s microphone

Hang up

Double tap the MFB of either earbud.

Reject

Press and hold the MFB of either earbud for 1 second.

Activate Siri

When in standby and music mode firstly tap the MFB of either earbud once, and then instantly press and hold the earbud for 1 second.

RESET

Make sure Bluetooth is turned off in your device.
When both earbuds are in the charging case, simultaneously press and hold both earbuds for 10 seconds to clear paired devices.
The earbud’s light will flash red and blue simultaneously which means successful resetting.

CHARGING

Wired Charging

WIRED CHARGING

Wireless Charging

Note: wireless charger is sold separately.

FCC STATMENT

Any Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operaion.