Soundcore Rave Mini User Manual
- June 7, 2024
- Soundcore
Table of Contents
Soundcore Rave Mini User Manual
Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables and adapter.
- Do not use any corrosive cleaner / oil to clean.
What’s Included
At a Glance
- Power Button / Power Indicator
- Bluetooth Button / Bluetooth Indicator
- Source Input Button / Source Input Indicator
- Next Track Button
- Previous Track Button
- Multi-function Button
- Volume + Button
- Volume – Button
- Light Effects Button / Light Effects Indicator
- Bass Up Button / Bass Up Indicator
- DC Power Input
- USB Port
- AUX IN Port
Using Your Soundcore Rave Mini
- Turn On / Off
| ON | Press |
|---|---|
| OFF | Press and hold for more than 1 second |
Bluetooth Mode
Note: Soundcore Rave Mini can pair up to 2 mobile devices via
Bluetooth(Dual
Bluetooth Connection). Soundcore Rave Mini can only play the music on one
mobile device at a time.
| Flashing Blue| Bluetooth Pairing Mode
---|---|---
| Solid Blue| Connected to a device
| | Enter True Wireless Stereo Group Mode / Disconnect True Wireless Stereo
| Double Flashing Blue| True Wireless Stereo Group Mode
| Solid Blue| Connected to True Wireless Stereo
Tips: With True Wireless Stereo technology, you can pair your Soundcore Rave Mini with another Soundcore Rave Mini to explore the best sound effects with left and right sound channels separated on both speakers.
| Play / Pause
---|---
| Play Next Song
| Play Previous Song
| Press to turn Bass Up on and off
| Press and hold for 2 seconds to switch between Indoor / Outdoor equalizer
modes.
| Activate Siri / Other Voice Control Software
| Volume Up / Down
Check available Light Effects modes on Soundcore App.
When turned on, Soundcore Rave Mini
will automatically connect to the last connected device if available. If not,
press the Bluetooth pairing button to activate
pairing mode. To pair a different device, press the Bluetooth button to re-
enter pairing mode. Then repeat the pairing steps. Having connection problems?
Remove Soundcore Rave Mini from your device’s Bluetooth history and ensure
it’s less than 3 feet away. Then try pairing again. To get the best sound
quality, make sure there is a clear line of sight between the connected device
and your speaker.
Source Input
Plug in an audio cable or insert USB drive, then press the source input button
to
switch between AUX in mode and USB mode(support MP3 / WMA formats)
| Solid Green(Source input indicator)| AUX in mode
---|---|---
| Solid White(Source input indicator)| USB mode
*SoundLine AUX cable sold separately.
When using AUX mode, control audio
playback via the connected device.
Charging your Soundcore Rave Mini
| Battery level <10%
---|---
| Battery level <25%
| Battery level 25%~55%
| Battery level 51%~75%
| Battery level 75%~100%
| Slow Flashing White(Power indicator)| Charging
---|---|---
- Use the included DC power cable to charge your Soundcore Rave Mini and make sure it is fully charged before its first use.
- Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.
Beat-Driven Light Show
| Press to turn Light Effects On / Off
---|---
Note: Flash can be turned off in Soundcore app individually
Soundcore App
Download the Soundcore app for an enhanced product experience. Follow onscreen
instructions to set up Soundcore app.
When not in use, store your speaker in
a cool place.
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited
Warranty.
Declaration of Conformity Hereby, Anker Innovations Limited declares that the
radio equipment type A3390 is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following
internet address: https://www.anker.com/products
Maximum output power: 6dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Specifications
*Specifications are subject to change without notice.
Input| 100V-240V AC, 50~60Hz
Charge out| 5 V ⎓ 2 A
Audio output| 80W
Battery capacity| 4900 mAh
Charging time| 4.0 hours
Playtime (varies by volume level and music content)| 18 hours
Size| 180 x 180 x 369 mm
Weight (without packaging)| 3.5 kg / 123.4 oz
Bluetooth version| V5.0
Bluetooth range| 20 m / 66 ft
Soundcore App
- Light effect
- Update firmware
- Wave Equalizer
- Stereo or Boost mode
- Rename
- More
Product Number A3390
Bluetooth Speaker / Soundcore Rave Mini
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.”
FCC Statment
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Soundcore Rave Mini User Manual – Download [optimized]
Soundcore Rave Mini User Manual – Download