VONYX CMS Series Studio Set/ Condenser Microphone Instruction Manual
- June 7, 2024
- VONYX
Table of Contents
VONYX CMS Series Studio Set/ Condenser Microphone Instruction Manual
INSTRUCTION MANUAL
V1.0
Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Keep the manual for future reference.
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original factory box and packing.
MICROPHONE INPUT
STAND ASSEMBLY INSTRUCTIONS
1. Install the base of the stand on to, for example, a table top.
2. Attach the suspension arm link to the base stand
3. Tighten the nut once your preferred suspension arm direction has been
determined
4. Attach the arm to the suspension arm link
5. Attach the shock mount to the suspension arm
6. Adjust the height of the arm to your preferred height
7. Put the microphone into the clamp ring of the shock mount
8. Optional: attach the pop filter to the stand to eliminate popping and
sibilance sound
SPECIFICATIONS
Specifications and design are subject to change without prior notice.
Copyright © 2018 by Tronios The Netherlands