VONYX STM-7010 4 Channel DJ Mixer Instruction Manual

: October 30, 2023
: VONYX

Table of Contents

VONYX STM-7010 4 Channel DJ Mixer
Product Information
Product Usage Instructions
SAFETY INSTRUCTIONS
OVERVIEW
CONTROLS
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VONYX STM-7010 4 Channel DJ Mixer

VONYX-TM-7010-4-Channel-DJ-Mixer-product

Product Information

The Vonyx STM-7010 is a 4-channel DJ mixer with a reference number of 172.880. The product contains voltage carrying parts and is designed to be connected to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse. The product is not suitable for continuous use and should be kept away from heat sources, rain, and moisture. The product must be repaired by a qualified technician to avoid electrical shock. The product has a built-in lead-acid rechargeable battery that should be recharged every 3 months if the product is not going to be used for a long period of time.

Product Usage Instructions

Prior to using the product, read the manual thoroughly and follow the instructions to avoid invalidating the warranty and to prevent fire and/or electrical shock.
When the product is switched on for the first time, some smell may occur which is normal and will disappear after a while.
The product should not be opened as it contains voltage carrying parts.
Avoid placing metal objects or pouring liquids into the product as this may cause electrical shock and malfunction.
Avoid placing the product near heat sources such as radiators and do not place it on a vibrating surface or cover the ventilation holes.
When unplugging the product from a mains outlet, always pull the plug, never the lead. Do not plug or unplug the product with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer.
To avoid fire and shock hazard, do not expose the product to rain and moisture and do not use the product in humid rooms or outdoors.
Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains.
If the product has not been used for a longer period of time, let the unit reach room temperature before you switch it on.
Do not repeatedly switch the product on and off as this shortens the life time.
Keep the product out of the reach of children and do not leave it unattended.
In case of malfunction, always seek advice from a specialist and do not use cleaning sprays to clean switches.
Do not force the controls and keep the product at least 60cm away from computer or TV if it has a speaker inside which can cause magnetic field.

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features. Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

SAFETY INSTRUCTIONS

Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The product contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
The product is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the product from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the product with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the product to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Do not repeatedly switch the product on and off. This shortens the life time.
Keep the product out of the reach of children. Do not leave the product unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
Keep the original packing material so that you can transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard. This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to. The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!

NOTE : To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

DISPOSAL
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

VONYX-TM-7010-4-Channel-DJ-Mixer-fig-1

CONTROLS

MICROPHONES
DJ/Mc have their own dedicated level control. microphones have individual 2 band eq section.
TALKOVER
There are talk over, MIC on and MIC off function. The Sound Pressure Level of audio from input sources will be decreased while TALK OVER mode is set.
CHANNEL GAIN
This rotary control adjusts the input level.
AUX INPUT
Music can input the mixer with 3. 5mm audio line.
CHANNEL LEVEL FADERS
These are used to adjust the output level for each channel.
XF ASSIGN
Two of the XF ASSIGN knobs allows the mixing of one source into another in your unit is removable and can be easily replaced if needed.
CHANNEL SELECTORS
These are used to switch between Line input and Phono、mic、USB input on each channel.
MASTER
This controls the overall output from the mixer, master output to the PA System.
DISPLAY
The unit has two LED displays Left output, Right output The left and right output display shows the output level of the mixer.
USB IN/OUT
The USB jack can connect to PC.
BALANCE OUTPUT
The mixer support L/R balance output.
POWER
Power switch.
PHONES LEVEL
This controls the output volume of the headphones. Care should be taken not to have this set to high as it could result in damage to both the hearing of the user and the headphones. The channel to be monitored is selected via the cue assign control.
CUE SELECTOR
Select each channel of the CUE signal.
HEADPHONE
¼” jack headphone out.
POWER INPUT
Please ensure the correct voltage is selected for your country. Failure to set the correct voltage Will cause damage to the unit.
RCA MASTER OUTPUTS
Left & Right line level Unbalanced RCA outputs.
BOOTH OUT
Line level Unbalanced BOOTH connectors.
REC OUT
Line level Unbalanced RCA connectors.
CHANNEL 4
Line5 input/mic3 JACKS.
CHANNEL 3
PH3/USB/Line4.
CHANNEL 2
PH2/AUX/line3.
CHANNEL 1
PH1-LN1/line2.
MIC1 AND MIC2 LEVEL
BOOTH OUT LEVEL
MASTER BALANCE CONTROL
Let you adjust master balance.
MASTER MONO/STEREO SELECTOR
Select mono mode or stereo mode.
BASS AND TREBLE CONTROLS
Lets you adjust the volume of high、mid、low Frequency on each channel.
HEADPHONE CUE/PGM CONTROL
Allow you to listen simultaneously or separately to the CUE material or the active program.

TECHNICAL SPECIFICATION

Frequency response : 20Hz – 20KHz
THD : <0.02%
Input level: Mic: 1.5mV, 2 KOhm
Input level : Phono: 3mV, 680 Ohm
Input level : Line: 150mV, 27 kOhm
Signal to noise ratio : >80dB
Output level : Master: 1V
Output level : Record: 350mV
Power supply : 220-240VAC 50Hz
Dimensions (L x W x H): 335 x 280 x 115mm
Weight : 5.20kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. The products referred to in this manual conform to the European Community Directives to which they are subject

European Union
Tronios B.V., Bedrijvenpark Twente Noord 18, 7602KR Almelo, The Netherlands