Shark Cordless 3-in-1 Wand Vacuum System User Guide

: June 7, 2024
: Shark

Table of Contents

WHAT’S INSIDE:
ASSEMBLY
POWER SETTINGS
LI-ION BATTERY
CHARGING OPTIONS
CORDLESS 3-IN-1
EMPTYING THE DUST CUP
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shark Cordless

lease make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.

QUICKSTART GUIDE

For questions, visit us online at sharkclean.com/support Register your vacuum at registeryourshark.com

Shark Cordless 3-in-1 Wand Vacuum System

WS630

WHAT’S INSIDE:

A Hand Vacuum
B Wand
C PowerFins™ Floor Nozzle
D WANDVAC® System Docking Station
E Battery Pack
F Hand Vacuum Storage Clip (pre-attached)
G Duster Crevice Tool

Shark Cordless 3-in-1 Wand Vacuum - WHAT’S INSIDE

Slide the wand onto the neck of the floor nozzle until it clicks into place.
Slide the hand vacuum nozzle over the wand until it clicks into place.
Make sure the dock plate is facing upright. Slide the charging post into the slot on the back of the dock until it clicks into place.
Place the dock on the floor near a wall outlet.
Plug the wall charger into the outlet, then connect the cord to the port on the back of the charging post.
Store cleaning accessories on the mount on the dock plate.
For proper operation, ensure all components are completely connected and clicked into place.

ASSEMBLY

Shark Cordless 3-in-1 Wand Vacuum - ASSEMBLY Store cleaning accessories

For complete maintenance instructions, see the enclosed Owner’s Guide.
For additional parts and accessories, visit sharkaccessories.com.
For additional batteries and charging accessories, visit sharkclean.com/batteries.

POWER SETTINGS

Shark Cordless 3-in-1 Wand Vacuum - POWER

Press the On/Off button on the handle to turn on power. To turn off power, press the button again.

Shark Cordless 3-in-1 Wand Vacuum - BOOST MODE

For an added boost of power, push and hold the Boost button on the handle. The Boost icon will blink white while in this mode. Release the button to return to standard power.

LI-ION BATTERY

Charging

Shark Cordless 3-in-1 Wand Vacuum - Charging

In Use

Shark Cordless 3-in-1 Wand Vacuum - In Use

CHARGING OPTIONS

Shark Cordless 3-in-1 Wand Vacuum - CHARGING OPTIONS

Make sure the contacts on the wand or hand vacuum are aligned with the contacts on the charging dock or charging post. When docked properly, the charging lights on the hand vacuum will blink, indicating that charging has begun. When charging is complete, all three indicator lights will remain on for 5 minutes, then shut off.

CORDLESS 3-IN-1

Shark Cordless 3-in-1 Wand Vacuum - UPRIGHT

The brush roll is activated when the hand vacuum is connected and powered on, and the handle is tilted back.

Shark Cordless 3-in-1 Wand Vacuum - ABOVE-FLOOR

To detach the hand vacuum, slide the release tabs on both sides of the handle and lift it off the wand. Attach an accessory by sliding it into the nozzle. To remove the accessory, slide the release tabs on the handle. To reattach the hand vacuum, slide the nozzle over the wand on until it clicks into place.

Shark Cordless 3-in-1 Wand Vacuum - ABOVE-FLOOR WAND

To detach the floor nozzle, step on the nozzle while pressing the release button at the bottom of the wand. Lift the wand to remove it. Reattach by sliding the wand over the nozzle neck until it clicks into place.