Trust Vintori Wireless Speaker User Manual

: June 7, 2024
: Trust

Table of Contents

Trust Vintori Wireless Speaker
Installation
iPad/ iPhone
Android
Windows
Bluetooth Audio Speaker
Trouble shooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Trust Vintori Wireless Speaker

Product

Installation

iPad/ iPhone

Ipad

Android

Windows

windows

Bluetooth Audio Speaker

Installation

Input selection
Volume control/ Mode
Previous track*
Play/ Pause*
Next track*
LED indicator:
- Blue 1x every sec. Pairing mode
- Blue 1x every 2sec. Paired not connected
- Blue 2x every 4sec. Paired & connected
- Red constant 3.5mm input
- Red 1x every sec. Standby mode
3.5mm Audio input
3.5mm Headphone output
Power Adapter input
Power button
Power Adapter
Audio cable
* Function only work when Bluetooth input is used.

Connect the power adapter to the wall socket.
Connect the power adapter to the power adapter input ‘I’.
Power on the speaker by pressing the power button on the rear of the speaker.
The LED indicator ‘F’ will start flashing Blue once every second (paring mode).

If the LED indicator is not flashing blue 1x every sec. press and hold the play/pause button for 5sec.
If a passcode is requested during the configuration of the device Use ‘0000’.

Standard Configuration

iPad/ iPhone

Go to ‘Settings’.
Go to the ‘General’ settings.
Go to ‘Bluetooth’.
Make sure that Bluetooth is on.
Select ‘Trust BT Audio’ in the list of Bluetooth devices. (make sure the speaker is in pairing mode)

When the device status is ‘paired’, your device is ready to use.

Android

Go to ‘Settings’.
Go to ‘Wireless and network’.
Go to ‘Bluetooth settings’ and press ‘find nearby devices’ if needed.
Select ‘Trust BT Audio’ in the list of Bluetooth devices (make sure the speaker is in pairing mode).
Press and hold ‘Trust BT Audio’ to go to the options menu of the wireless audio device.
Make sure that the device is ‘Connected’ and the ‘Media’ profile is selected.
Your device is ready to use.

Windows

A. Open the taskbar icons.
B. Click on the Bluetooth icon.
C. Click on ‘Add a device’.

Select ‘Trust BT Audio’ in the list of Bluetooth devices (make sure the speaker is in pairing mode).
When the device is successfully added, your device is ready to use.
Right click the speaker icon in the taskbar.
Open the ‘Playback devices’.
Set the ‘Trust BT Audio’ device as your default device.

Configuration on a Mac system

Click on the Bluetooth icon in the taskbar.
Make sure Bluetooth is on.
Go to ‘set up Bluetooth device…’.
Select ‘Trust BT Audio’ in the list of Bluetooth devices (make sure the device is in pairing mode).
Click on ‘Continue’.
If the pairing attempt was unsuccessful. Go to ‘Passcode options’.
Select ‘Use a specific passcode’.
The passcode to use is ‘0000’.
Click on ‘ok’.
Click on ‘Continue’.
Your device is now ready to use.

Advanced Controls

Standby: By pressing and holding the volume control for 4 seconds the speaker goes into standby mode (LED flashing red 1x every second).
To power the speaker back on, press the volume control for 1 second.

Volume/ Treble/ Bass control
Press the volume control when playing music to switch between volume, treble, and bass.

Speaker memory
The speaker has an build in memory. So that every time you power on the speaker and your music device they will automatically connect.
To clear the memory of the speaker press and hold the play/pause button for 5 seconds.

Change audio input
The speaker has 2 different audio inputs. Bluetooth and 3.5mm audio.
By pressing the input selection button ‘A’ you can switch between these inputs.
The LED light indicates the selected input source:

Blue Led: Bluetooth
Red LED: 3.5mm audio input

Trouble shooting

Can’t connect the BT speaker to my device

Make sure that the BT speaker is in paring mode. Press and hold the play/pause button for to activate the pairing mode (blue led flashing every sec.).
Make sure that you have selected the correct
If a passcode is requested. Use ‘0000’.
Move the BT speaker closer to your audio source (maximum distance 10m under ideal circumstances)
Erase the internal memory of the speaker (press and hold the play/pause button for ). Repeat the standard configuration steps for your device (iPad/iPhone, Android, Windows, Mac).
The speaker can only be paired with one device
Check the LED light. LED light needs to be flashing blue 2x every 4sec.
Make sure that you have selected the correct
Repeat the standard configuration steps for your

Distorted Sound

Your BT speaker is too far from your device (maximum distance 10m under ideal circumstances).
If you are using the product around large metal surfaces, remove the metal surface or move you product away from the metal
Walls and Floors drastically reduce the range of the Move the BT speaker closer to your audio source.
Move the BT speaker away from other wireless devices (like Wireless network routers, mouse and keyboard).

Sound volume is low