MAMFU PDFDJI HD Ducted FPV Racing Instruction Manual
- June 7, 2024
- MAMFU
Table of Contents
MAMFU PDFDJI HD Ducted FPV Racing Instruction Manual
Instructions:
Brand Name
|
AURORA RC
---|---
Fight Controller| F722 BT DUAL
(Upgrade firmware version: JHEF7DUAL.hex)
Motor| T-Motor F1507 2700KV
Camera & VTX| DJI Air Unit HD VTX Camera
Drone Name| MAMFU
ESC| BLHELI S 40A 4IN1
Propeller| Gemfan 75MM 3-Bladed
Recommend Battery:| 4-6S 800-1300mah Lipo XT60 (not included)
Flight Controller F722 BT DUAL:
| Size | 36.5 x 36.5 mm |
|---|---|
| Wight | 8.2 g |
| Hole distance | 30.5 x 30.5 mm |
| Processor | STM32F722RET6 216MHz |
| Gyroscope | MPU6000 & DUAL ICM20689 (32K) |
| Barometer | BMP280 |
| OSD Chip | AT7456E |
| Black Box | 16MB |
| BEC1 | 5V-2A |
| BEC2 | 9V-3A (Camera and VTX Power supply, can be turned on and off through |
USER2)
Input voltage| 2-6S lipo (7.4V-26V)
Dual camera input| V IN 1 and V IN 2 dual signals, default V IN 1 (Switch
through USER1)
Serial control port| 6 Channels
Bluetooth| Support Bluetooth (port UART4, baud rate 115200, name JHEMCU)
Flight control firmware| Betaflight JHEF7AUALI.hex
Serial digital receiver port| SBUS/IBUS/DSM for UART2 (DJI Air Unit DJI HDL is
SBUS)
As mentioned above, FC supports V1 and V2 two cameras, turning ON or OFF 9V
BEC (Camera & VTX power).
The default configuration is as follows to make V1 and 9V BEC normally open.
If necessary, you can configure your usual AUX channel to control their ON or
OFF.
How to Use Bluetooth APP
Equipped with Bluetooth module, it is directly connected with the mobile phone
APP, and can set the flight control anytime and anywhere.
Software download address: www.speedybee.com/speedy-bee-
app/
-
Turn on your phone Bluetooth, open APP and Click Bluetooth.
-
Click the searched JHEM, CU to connect to flight control.
****
-
Now you can set flight control parameters with your phone.
How to Match the DJI Unit?
For Instructions on DJI AIR UNIT, please refer to the attached manual.
We wish you have fun with it.