Starxing B09XXQYVDC LED Puck Light With Remote Control User Guide

Starxing B09XXQYVDC LED Puck Light With Remote Control

Product Information

• The product is equipped with a +/button that allows you to adjust the brightness of the device. The adjustment can be made by either long pressing or short pressing the +/button.
• Additionally, the product comes with a plastic insulation sheet. It is important to unplug the device before using it and remove the plastic insulation sheet.

Product Usage Instructions

1. Before using the product, ensure that it is unplugged.
2. Locate the +/button on the device.
3. To adjust the brightness, press and hold the +/button for a longer duration.
4. If you prefer to make quick adjustments, press the +/button briefly.
5. Note that by pressing the +/button, you can increase or decrease the brightness level as desired.
6. When using the product, make sure to remove the plastic insulation sheet before plugging it in.

Follow these instructions to effectively adjust the brightness and safely use the product.

• Short pressing the lamp lens to turn/off.
• Long/short pressing the (+/-) on the lamp lens to increase/ decrease brightness.

Remote Function

1. ON/OFF
2. Adjust brightness(10%-100%)
3. Timer
4. Fixed brightness mode

Plastic insulation sheet Please unplug it when using.

Note:
Long or short pressing the +/-button can adjust the brightness.

Product Feature

1. Wireless under cabinet lights battery powered with remote controls.
2. Two control modes: Tap control or remote control. You can turn lights on/off by pressing the lamp cover lens or using the remote control. When using the remote control, please aim the LED signal light of the remote control at the puck light.
3. Dimmable function: Pressing the +/- button or pressing the lamp lens to increase/ decrease brightness (10%-100%), or press the brightness button (25%, 50%, 75%, 100%) on the remote control. You can freely adjust according to your lighting needs.
4. Support step-less dimming. Long pressing or short pressing the remote(+/-) or light can adjust the brightness.
5. When the brightness adjustment reaches 100% brightness, the light will blink 2 times to remind that the maximum brightness has been reached.
6. The default brightness is 75% brightness and the default auto-off time is 10 minutes.
7. Memory function: When you use it next time it will remember the brightness mode and timing mode of the last time you used the light. The memory function can only be supported when the battery is continuously powered. If the battery is replaced, it will be restored to the default settings (75% brightness, 10 min).
8. Two ways of installation: Comes with a hook patch and double-sided adhesive tape. You can hang it or stick it where you need it.
9. Easy to replace batteries: The product is designed with a snap-on design, simply rotate the product out of the snap-on fixed position to separate the back cover.
10. Multi-purpose: Mini portable light can be placed anywhere you want, such as a kitchen cabinet, pantry, stairs, locker, wardrobe, showcase, any dark corner, or decoration.

Product Information

• Product Model: H7
• LED bead type: 2835
• Number of LED beads: 4 pcs
• Lumen value: 60 LM
• Color temperature: Natural white(4000K)
• Power source: 3 x AAA battery
• Power: 0.3 W
• Working time: Depend on the battery you used (Reference time: 50 H)
• Remote control distance: 5-8 M
• Remote control power: Equipped with a CR2025 button battery
• Material: ABS+PS

Package Included

• 6 x LED Puck Light
• 2 × Remote Control
• 6 × Hook Sheet
• 8 x Adhesive Tape
• 1 x User Manual

Warm Tips

1. Each light is powered by 3 × AAA batteries. The batteries are not included.
2. For the first time, please unplug the plastic insulation sheet from the bottom of the remote control.
3. In order to save battery power, the light won’t be set to stay on.
4. The product automatically turns off after 10 minutes by default. It can be changed by a timer. The maximum use time is 1 hour each time. As soon as the product is removed from the battery, it will automatically revert to the default settings(75% brightness, 10 min).
5. Please stick lights on smooth and flat surfaces. Before installing, please wipe the surface to make sure it is clean, dry, and free from dust and oil.

Instructions for the use of stickers

The two sides of the adhesive tape are made of different materials. The gel side covered by the clear plastic sheet is washable and reusable. The glue surface covered by the white paper is not reusable. First, peel off the gel from the white paper and stick it on the product, then peel off the transparent plastic sheet and stick the gel where you need it.

1. Stick this side(white paper layer) to the lamps
2. Stick the other side (clear plastic sheet layer)to the wall

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>