Sunco Baffle Downlight 4 Installation Guide
- June 7, 2024
- SUNCO
Table of Contents
The Brighter
Choice
BAFFLE DOWNLIGHT 4″
Install Guide and Manual
COMPONENTS
TP24 Connector E26 Base
EASY INSTALLATION
Turn Power OFF
1. Turn off circuit breaker that provides power to the light switch for the recessed lights.
4″ Housing
2. Locate the housing.
· Remove previous fixture, fixture may be hot so allow time to cool after
turning off power
3. Ensure the size of the opening is 4″.
TP24 Connector E26 Base
4. Determine the type of connector available.
· TP24 Connector
· E26 Base
5. Thread the appropriate adapter to make connection in the housing.
· Note: the wires may come lose from the coonectors so ensure they are
attached
6. Tuck all wires into the can.
7. Line up trim ring with opening.
8. Push downlight into can until secure. Compression clips will hold retrofit light in place.
Turn Power ON
9. Turn on circuit breaker and test light.
WARNING
All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections. Please review these instructions carefully before proceeding.
WARNING: Risk of fire or electric shock. Do not alter, relocate or remove wiring during installation.
WARNING: Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
SPECIFICATIONS
Voltage 120V
Wattage 11W
Suitable for Locations Ingress Damp
Housing Aluminum+PC
Weight 0.34lbs
Warranty 7 years
Documents / Resources
|
Sunco Baffle Downlight
4
[pdf] Installation Guide
Baffle Downlight 4
---|---