JOHN LEWIS ABACUS Wide cupboard Instruction Manual
- June 7, 2024
- John Lewis
Table of Contents
JOHN LEWIS ABACUS Wide Cupboard Instruction Manual
Stock number: 816 / 10207 H74 W80 D42cm
H74 W80 D42cm
Thank you for purchasing the ABACUS wide cupboard. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life. Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
Important Safety Information
Warnings
The product should only be used on firm, level ground.
Keep small parts out of reach of children .
Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check ali screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stanci on the product.
Do not use power tools to construct as overtightening and panel failure may occur.
Your Wide bupboard
Internal dimensions
Stock number: 10207
Wide cupboard overall size: H74 W80 D42 cm
Fixtures and fittings
Product Assembly
ABACUS Wide cupboard
10207
Wall attached item only:
A guide to wall mounting and fixings
Warning
Wall fixing screws are not included, since different wall material require different types of screws / fixings. Please ensure you use the correct screws / fixings for your type of walls and seek professional advice if you are not sure.
Failure of the product due to incorrect fixings is responsibility of the installer.
Important: When drilling into the walls always check that there are no hidden wires or pipes etc.
Types of walls
You can use one of the following types of wall plug if your walls are made of brick, breezeblock, concrete, stone or wood.
-
General Purpose wall plug
Generally aerated blocks should not be used to support heavy loads, use a specialist fitting in this case. For light loads, general – purpose wall plugs can be used. -
Plasterboard wall plug
For use when attaching light loads on to plasterboard partitions. -
Cavity Fixing wall plug
For use with plasterboard partitions or hollow wooden doors. -
Cavity Fixing – Heavy Duty wall plug
For use when fitting or supporting heavy loads such as shelving, wall cabinets and coat racks. -
Hammer Fixing wall plug
For use with wall stuck with plasterboard. The hammer fixing allows it to be fixed to the wall rather than the plasterboard. Always check the fixing is secure to the retaining wall. -
Shield Anchor wall plug – Heavy loads
For use with heavier loads such as 1V and Hi-Fi speakers and satellite dishes etc.
Care and maintenance
Safety: Periodically check ali fittings and wall fixings to ensure they have not come loose and retighten as necessary
Care guide
Care and maintenance
Wood furniture
Wood displays different grain patterns depending on which way they are cut – for example, the ‘medullary ray’ which can appear on oak furniture is a mark of good quality timber – these are just characteristics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer fronts by the way slivers are arranged.
All timber and veneer surfaces will change colour and mellow over tirne. New furniture will initially vary in shade from items that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its lustre. Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface when building up over tirne.
Make sure all surfaces are protected from heat and liquids by mats and coasters.Wipe up spills immediately and ensure that a mat or pad is placed under paper if you are writing.
Our furniture will endure most temperatures in the home, but it is best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by home heating can cause damage such as warping.
Safety instructions
Never drag furniture when moving it, always lift it.
Periodically check ali fixings to ensure none have come loose and retighten when necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Your feedback is very important to us and we would love to hear your comments on your new furniture.
Please visit our website to leave a review. Thank you.
Retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E SNN
johnlewis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>