hager WFSATBNB F Type Satellite Socket Instruction Manual

hager WFSATBNB F Type Satellite Socket Instruction

Decorative

The high quality modern finishes that are available within the Sollysta decorative range fit seamlessly into any setting and come with all the installation features of the white moulded variant such as a neutral loop terminal, cable lead is and the three pin shutter mechanism. Available in both raised and flat plate options, the range offers you the flexibility to follow the design cues within the building making them perfect for any application.

Decorative Wall Switches

• Unique patented LOOP terminal to allow neutral looping at the switch
• Complies with BS EN 60669-1, a.c only
•  ‘X’ rated – No need to derate for fluorescent loads
• Two way switches can be wired either 1 way or 2 way
• Clear terminal markings: 1-way L1, 2-way L2
• Capacity of each terminal 2 x 4.0mm2 conductors
• For multigang switches use of a 25mm mounting box will provide increased wiring space
• Supplied with M3.5 x 20mm long fixing screws

Decorative Dimmers

• Stylish flush buttons give easy press action
• Quick press for ON/OFF
• Hold button down to dim or brighten light level
• Leading edge
• Soft start feature prolongs lamp life
• Suitable for dimming mains and dimmable transformer extra low voltage lamps
• Automatic switch off in the case of transformer instability protects the dimmer and the transformer
• WR references supplied with M3.5 x 30mm long fixing screws
• WF references supplied with M3.5 x 20mm long fixing screws

Raised Plate Rotary Dimmer Switch Plate Kits

Decorative Isolator Switches

• Complies with BS EN 60669-2-4.
• Rated conditional short circuit current (Inc) 1500A tested with Hager MTN110 6kA B curve MCB.
• Capacity of each terminal 2 x 4.0mm2 conductors.
• For mounting boxes see selection chart on page 64.
• WR references supplied with M3.5 x 30mm long fixing screws.
• WF references supplied with M3.5 x 20mm long fixing screws.

Decorative Socket Outlets

• Unique patented 3 part safety shutter
• Complies with BS 1363 Part 2, a.c only
• Double pole switching mechanism on switched sockets
• Twin socket comes with twin earth as standard
• All terminal screws grouped in-line and upward facing for ease of installation
• Clear printed and engraved terminal markings
• Capacity of each terminal: 5 x 2.5mm2 conductors switched; 4 x 2.5mm2 unswitched
• WR references supplied with M3.5 x 30mm long fixing screws
• WF references supplied with M3.5 x 20mm long fixing screws

Decorative Socket Outlets

USB Sockets
Available in many variations including brushed steel, polished steel, polished brass and black nickel.

• There is also an option to have our Decorative USB Sockets with white or black inserts (excluding black nickel which will only come in a black insert).
• Our Sollysta Decorative USB socket also comes with the following features:

Twin charging ports: The USB socket comes with two charging ports capable of delivering a total maximum charging current of 2.4A. This can be delivered to either port, or divided between the two ports as required, and controlled by the devices being charged. The ports are marked 5V ===2.4A.
Intelligent connection: The Sollysta USB socket has built in intelligent connection, enabling the socket to identify itself as the dedicated primary charger for the connected device allowing for maximum charging capacity and improved charging speeds.
Standby power : In standby mode the power consumption is <150mW and the average current (rms) < 1 milli amp.
Can be installed in 35mm back boxes. Where 25mm back boxes are fitted, 10mm spacer is included for installation. The USB charger is protected against over-current and short circuit conditions on the output by a non-replaceable fuse. (i.e. the product will fail safe).
Fuse rating: 3.15A/240VAC

Decorative 45A Cooker Control Unit

• Complies with BS 4177
• Switch and socket are double pole
• Twin earth as standard
• Main switch is suitable for isolation
• All terminals are upward facing for ease of installation
• Clearly printed terminal marking
• Capacity of terminals: 2 x 6.0mm2, 1 x 16.0mm2
• WR references supplied with M3.5 x 30mm long fixing screws
• WF references supplied with M3.5 x 20mm long fixing screws

Decorative 13A Fused Connection Units

• Complies with BS 1363-4
• Cable clamp accommodates up to 1.5mm2 flexible cord
• Single screw fast fix cable clamp
• All terminal screws upward facing for ease of installation
• Clearly printed terminal markings
• Capacity of each terminal 2 x 6.0 mm2 conductors
• WR references supplied with M3.5 x 30mm long fixing screws
• WF references supplied with M3.5 x 20mm long fixing screws

Decorative 13A Fused Connection Units

Decorative 20A Double Pole Switches

• Complies with BS EN 60699-1 a.c. only
• Cable clamp accommodates up to 1.5mm2 flexible cord
• Single screw fast fix cable clamp
• All terminal screws upward facing for ease of installation
• Clearly printed and engraved terminal marking
• Capacity of each terminal 2 x 6.0mm2 conductors
• WR references supplied with M3.5 x 30mm long fixing screws
• WF references supplied with M3.5 x 20mm long fixing screws

Decorative 20A Double Pole Switches

Decorative 50A Double Pole Switches

• Complies with BS EN 60669-2-4
• Rated conditional short circuit current (Inc) 1500A tested with Hager MTN150 6kA B curve MCB
• LED indication
• All terminal screws upward facing for ease of installation
• Clearly printed terminal marking
• Capacity of each terminal 2 x 6mm2, 1 x 10mm2
• WR references supplied with M3.5 x 30mm long fixing screws
• WF references supplied with M3.5 x 20mm long fixing screws

Decorative Shaver Socket

• Complies with BS EN 61558-2-5
• Capacity of each terminal 2 x 2.5mm2 conductors.
• Designed for use in bathrooms and shower rooms and incorporates a double wound transformer for an earth free supply.
• Input 230V a.c. output dual voltage 230V a.c. and 115V a.c. outlets.
• Rating 20VA on either voltage.
• Primary circuit protected by a self resetting thermal overload device.
• Insertion of shaver plug automatically switches on the transformer.
• WR references supplied with M3.5 x 30mm long fixing screws.
• WF references supplied with M3.5 x 20mm long fixing screws.

Decorative Telephone, TV & Data

Telephone & Data

• BT sockets comply with BS EN 6312-2
• Supplied with fitted cable tie
• Quick connection with insulation displacement terminals
• RJ11 has tool-less quick connect terminals
• Clearly printed terminal marking

TV & Satellite

• TV outlets comply with BS 3041
• Satellite outlets comply with BS EN 50083-2
• Fully screened
• DAB compatible
• WR references supplied with M3.5 x 30mm long fixing screws
• WF references supplied with M3.5 x 20mm long fixing screws

Decorative Euro Accommodation Plates

• Carrier plates facilitate installation of industry standard modular data outlets
• Easy to configure for all applications
• Easy installation of module to plate
• Robust retention of modules in operation
• Quick release of modules for maintenance
• WR references supplied with M3.5 x 30mm long fixing screws
• WF references supplied with M3.5 x 20mm long fixing screws

Decorative Lounge Plates

• WR references supplied with M3.5 x 30mm long fixing screws.
• WF references supplied with M3.5 x 20mm long fixing screws.

Decorative Blank Plates

• WR references supplied with M3.5 x 30mm long fixing screws.
• WF references supplied with M3.5 x 20mm long fixing screws.

Decorative Cooker Control Unit 50A

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>