Lexip TSXLXHS0001 Tsume Casque Audio Sans Fil Instruction Manual
- June 8, 2024
- LEXIP
Table of Contents
Lexip TSXLXHS0001 Tsume Casque Audio Sans Fil
Product Information
Product Overview
This document details the Lexip x Tsume® wireless headphones, specifically the models “Revenge”, “Kamui”, and “Destruction”. These models are designed by Lexip in collaboration with Tsume, as indicated by the branding on the product.
Specifications
- Product Name: Revenge & Kamui & Destruction
- Model Numbers: TSXLXHS0001, TSXLXHS0002, TSXLXHS0003
- Origin: Made in China
- Version: 2024-01-18
| Item | Details |
|---|---|
| Product Type | Wireless Headphones + 3.5mm cable |
| Battery Type | Rechargeable Li-ion Polymer, 1000 mAh |
| Features | RGB Lighting |
| Audio Cable | 3.5mm, 2m length |
| Charging Cable | USB-C, 1.5m length |
| Charging Voltage | DC 5V 500mA |
| Charge Time | Approx. 2.5 hours |
| Bluetooth Version | 5.0 |
| Bluetooth Range | Up to 10m |
Product Contents
- Lexip x Tsume® – Wireless Headphone
- Detachable microphone
- USB Type-A to USB Type-C charging cable
- 3.5mm audio cable
- Product disclaimer
Important Safety Instructions
- Keep the product out of reach of children and pets to prevent choking hazards.
- Do not use in environments that require special concentration, e.g., while driving.
- Do not expose the product to liquids or high temperatures.
- Do not attempt to service the product yourself; only qualified service personnel should repair damaged products.
Product Usage Instructions
- Power On/Off: Hold the button for 3 seconds to turn the headphone on/off. A flashing LED indicates the headphone is on.
- Volume Control: Press the volume buttons to adjust the volume. Press the button once to increase and once to decrease.
- Mute Microphone: Press the microphone mute button to turn the microphone off. Press again to turn it back on.
- Audio Effects: Press the designated buttons to activate specific audio effects like sound feedback.
Device Controls
Power Button
Hold for 3 seconds to turn on (LED will blink) and off (LED stops blinking).Volume Buttons
Scroll up to increase volume and down to decrease volume.Micro Mute Button
Press to mute (Microphone off) or unmute (Microphone on) the microphone.For more detailed instructions on the device’s controls, see the ‘Mode d’emploi’ section in the original document.
Bluetooth Pairing Instructions
- Hold the Power button for 3 seconds to initiate pairing (LED will blink and “Power On” voice prompt).
- Connect to “Lexip x Tsume” from your device’s Bluetooth settings.
- Upon successful connection, a “Connected” voice prompt will be heard.
Wired Connection
Connect the USB Type-C cable to the headset (automatically turns on if it was off) and the other end to a device with a 3.5mm audio jack.
Frequently Asked Questions (FAQ)
How do I pair the headphones with my device?
To pair the headphones, turn them on and enter pairing mode on your device. Locate the headphones in the Bluetooth settings and connect.
How do I charge the headphones?
Use the provided charging cable to connect to a power source. The LED indicator will show the charging status.
Can I use the headphones with a wired connection?
Yes, you can use a 3.5mm audio jack to connect the headphones to devices without Bluetooth capability.
What should I do if the headphones are not pairing?
Is there a microphone mute function?
Yes, you can mute and unmute the microphone by pressing the Micro Mute button.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>