soundcore Icon Bluetooth User Manual
- June 7, 2024
- Soundcore
Table of Contents
soundcore Icon Bluetooth
Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Soundcore Icon can be immersed in water up to lm for up to 30 minutes.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Do not use any corrosive cleaner/ oil to clean.
What’s Included
At a Glance
- Power Indicator
- Power Button
- Volume – Button
- Multi-function Button 3.5mm Audio Input Port
- Volume + Button micro USB Port
- Bluetooth Button
- Bluetooth Indicator
- Carry-handle
Using Your Soundcore Icon
Turn On / Of
| ON | Press |
|---|---|
| OFF | Press and hold for more than 2 seconds |
Bluetooth mode
| Flashing Blue | Bluetooth Pairing Mode |
|---|---|
| OFF Solid Blue | Connected to a device |
Enter True Wireless Stereo Group Mode / Disconnect True Wireless Stereo
Flashing White| True Wireless Stereo Group Mode
Solid White| Connected to True Wireless Stereo
Note: When True Wireless Stereo group is successful, the LED indicator on
the first speaker will flash in blue, the LED indicator on the second speaker
will be solid blue.
With True Wireless Stereo technology, you can pair your Soundcore Icon with
another Soundcore Icon to explore the best sound effects with left and right
sound channels separated on both speakers.
| Play / Pause
---|---
| Play Next Song
| Play Previous Song
| Answer Call / End Call
| Reject Call / Switch between a call on hold and an active call
| End current call and answer incoming call / End current call and switch to
call on hold
| Switch audio source between Speaker and Phone
| Put current call on hold and answer incoming call
| Activate Siri / Other Voice Control Software
| Volume Up / Down
| Solid White| On a Call
---|---|---
| Flashing Blue| Incoming Call
When turned on, Soundcore Icon will automatically connect to the last
connected device if available. If not, press the Bluetooth pairing button to
activate pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing
mode. Then repeat the pairing steps.
Having connection problems? Remove Soundcore Icon from your device’s Bluetooth
history and ensure it’s less than 3 feet away. Then try pairing again. To get
the best sound quality, make sure there is a clear line of sight between the
connected device and your speaker.
AUX-In mode
- SoundLine AUX cable sold separately
Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device.
Charging your Soundcore Icon
| Slow Flashing Red| Low Battery
---|---|---
| Solid Red| Charging
OFF
| | Fully Charged
Use the included USB cable to charge your Soundcore Icon and make sure it is
fully charged before its first use. Disconnect your speaker from the charger
when fully charged. Do not charge your speaker for extended periods. When not
in use, store your speaker in a cool place.
Specifications
Specifications are subject to change without notice.
Input: 5 V 1 A
Audio output: 10 W
Battery capacity: max. 2600 mAh
Charging time: 4.0 hours
Playtime (varies by volume level and music content): 12hrs
Size: 182 x 61 x 62 mm / 7.2 x 2.4 x 2.4 inch
Weight (without packaging): 349 g / 12.3 oz
Bluetooth version: V5.0
Bluetooth range: 20 m / 66 f
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>