Easythreed X1 3D Printer Installation Guide

June 7, 2024
EasyThreed

Easythreed X1 3D Printer Logo

Easythreed X1 3D Printer
Install Manual

  • This manual is written in accordance with EasyThreed X1 3D printer
  • Printer upgrades and equipment models are slightly different, is a normal phenomenon, based on the actual products received.
  • User’s manual inside TF card.

Parts List: Take out parts from package, check if all parts have as listed below:
Easythreed X1 3D Printer Parts List 1

  1. Install the XZ Axis set to the Printer Base.
    Easythreed X1 3D Printer Install the XZ Axis set to the Printer
Base

  2. After insert the XZ Axis, Fixed with 2 screws.
    Easythreed X1 3D Printer After insert the XZ Axis

  3. Connect the Z-axis motor line to the output line of the printer control box as shown in the figure below.
    Easythreed X1 3D Printer Connect the Z-axis

  4. Install the Filament Holder as below.
    Important Notice:This filament holder can only hang on 250g weight filament.
    Easythreed X1 3D Printer Install the Filament Holder as
below connect the power and start the 3D printing journey.

ShenZhen EasyThreed Technology CO.,LTD
http://www.easythreed.com
info@easythreed.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals