EasyThreed X4 3D Printer Instruction Manual

June 7, 2024
EasyThreed

EasyThreed X4 3D Printer

a close up of a toy

Parts List : Take out parts from package , check if all parts have as listed below。

diagram

  1. Install the XZ Axis set to the Printer Base.

  2. After insert the XZ Axis, Fixed with 2 screws.

  3. Connect the Z-axis motor line to the output line of the printer control box as shown in the figure below..

  4. Install the Filament Holder as below.
    Important Notice: This filament holder can only hang on 250g weight filament.
    a close up of a box

    connect the power and start the 3D printing journey.。

icon
ShenZhen EasyThreed Technology CO.,LTD
http://www.easythreed.com
info@easythreed.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals