soundcore Flare+ Portable Bluetooth Speaker User Manual

soundcore Flare+ Portable Bluetooth Speaker User Manual

Safety Instructions

• Avoid dropping
• Do not disassemble
• Soundcore Flare+ can be immersed in water up to 1m for up to 30
• Avoid extreme
• Do not use the device outdoors during
• Use original or certified
• Do not use any corrosive cleaner/oil to

What’s Included

At a Glance

1. Volume Buttons for Volume Control                  6 Power Button
2. Bass Up Button                                                   7 USB port
3. Multi-function Button                                         8 micro USB Port
4. Light Effects Button                                           9 3.5mm Audio Input Port
5. Bluetooth Button

Using Your Soundcore Flare+

1. Turn on / off

a. Bluetooth mode

With True Wireless Stereo technology, you can pair your Soundcore EN Flare+ with another Soundcore Flare+ to explore the best sound effects
with left and right sound channels separated on both speakers.

Play / Pause

Play Next Song
Play Previous Song
Press to turn Bass Up on and off
Press and hold for 2 seconds to reset Equalizer settings
Answer Call / End Call
Reject Call / Switch between a call on hold and an active call
End current call and answer incoming call / End current call and switch to call on hold
Switch audio source between Speaker and Phone
Put current call on hold and answer incoming call
Activate Siri / Other Voice Control Software
Volume Up / Down
   Solid White| On a Call
---|---
Flashing White| Incoming Call
Press and hold for 2 seconds to turn Light Effects Of        f

Press to turn Light Effects On
Press once to switch between Light Effects modes

Check available Light Effects modes on Soundcore App.

When turned on, Soundcore Flare+ will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode. To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps. Having connection problems? Remove Soundcore Flare+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a
clear line of sight between the connected device and your speaker.

b. AUX-In mode

• SoundLine AUX cable sold separately.

Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device.

Plugging in an audio cable will automatically switch to AUX mode.When using AUX mode, control audio playback via the connected device.

Charging your Soundcore Flare+

Use the included USB cable to charge your Soundcore Flare+ and make sure it is fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods. When not in use, store your speaker in a cool place

.Specifications

Specifications are subject to change without notice.

Input: 5 V 2 A
Charge out: 5 V 1 A
Audio output: 25 W
Charging time: 4.0 hours
Play time (varies by volume level and music content): 20 hours
Size: 100 x 100 x 182 mm
Weight (without packaging): 853 g / 30.1 oz
Bluetooth version: V5.0
Bluetooth range: 20 m / 66 ft

Soundcore App

– Light effect
– Update firmware
– Wave Equalizer
– Stereo or Boost mode
– Rename
– More

Apple and the Apple logo are          Google Play and the Google Play
trademarks of Apple Inc                  logo are trademarks of Google Inc.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>