BOMANN 7811D Built In Larder Household Instruction Manual

7811D Built In Larder Household
Instruction Manual

Bedienungsanleitung/Garantie

Introduction

Thank you for choosing our product. We hope you will enjoy using the appliance.
Symbols in these instructions for use
Important information for your safety is specially marked. It is essential to comply with these instructions to avoid accidents and prevent damage.
WARNING:
This warns you of dangers to your health and indicates possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other objects.
NOTE: This highlights tips and information.

General notes

Read the operating instructions very carefully before putting the appliance into operation and keep the instructions including the warranty and the receipt. If you give this appliance to other people, also pass on the operating instructions.

NOTE:

• Due to constant product modifications, your appliance may differ slightly from these operating instructions; functions and methods of use remain unchanged.
• The illustrations in these operating instructions are for illustrative  purposes only and may differ from the original appliance.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appli- ance is not fit for commercial use.
• The appliance is only to be used as described in the user manual. Do not use the appliance for any

Special safety information for this unit

• This unit is intended to be used in household and similar applications such as
  – staff kitchen areas in shops, offices and other working environments;
  – farm houses and by clients in hotels, motels and other residential type environments;
  – bed and breakfast type environments;
  – catering and similar non-retail applications.

WARNING:

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• When positioning the appliance, ensure the supply cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• Do not store explosive substances such as aerosol containers with flammable propellant in the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction  concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are older 8 years and supervised.
• NOTE: Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
• Do not repair the appliance by yourself, always consult an authorized specialist. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. In  case of damage, the appliance must not be used!
• Use the provided collection points of electrical equipment for the disposal of the appliance.

Coolant

WARNING: Risk of fire / flammable materials
The coolant circuit of this unit contains the refrigerant
Isobutane (R600a), a natural gas that is flammable and of high environmental compatibility. Make sure no parts of the coolant circuit get damaged during transport and installation of the appliance.

If the coolant circuit is damaged:

• avoid any open flames or ignition source,
• disconnect the plug,
• thoroughly air the room in which the appliance is installed and
• contact an authorized technician.

Transport and packaging

Transport the appliance
Transport the appliance, if possible, in vertical position. Otherwise, it is absolutely necessary to allow the appliance standing upright for a few hours before installation ”Prior to first use”. Protect the appliance during transport against weather influences.
Unpacking the appliance

• Remove the appliance from its packaging.

• Remove all packaging material, such as foils, filler and cardboard packaging.
  Dispose of packaging materials that are no longer required in accordance with the locally applicable regulations.

• To prevent hazards, check the appliance for any transport damage.

• In case of damage, do not put the appliance into operation. Contact your distributor.
  NOTE:
  Production residue or dust may have collected on the appliance. We recommend cleaning the appliance according to chapter “Cleaning and maintenance”.

Appliance equipment

Appliance overview

1 Control panel / Interior light
2 Glass shelves
3 Vegetable box
4 Door storage racks
Delivery scope
4x glass shelf, 1x vegetable box, 3x door storage rack, 1x egg tray, incl. mounting material

Installation

Conditions for the installation location

• Good ventilation is required around the appliance to dissipate the heat properly and to guarantee efficient cooling operation at low power consumption.
  Enough clearance is necessary.
  – Refer to the instructions which we give you in “Built-in”;
  – Place the appliance so that the appliance door can open without being impeded.

• Only install at a location with an ambient temperature suitable for the climate class of the appliance. The climate class can be found under “Technical data” and on the rating label located in the interior or on the appliance rear.

• Look for stable, horizontal appliance position.

• Avoid the installation:
  – near heaters, next to a stove, direct sunlight or any other heat sources;
  – at locations with high humidity (e.g. outdoors, bathroom), as metal parts would be susceptible to corrosion under such circumstances;
  – near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.), in rooms which may have poor air circulation (e.g. garages).
  – Do not expose the appliance any weather.

Electrical connection

WARNING:

• The installation to the mains supply must conform to the local standards and regulations.
• Improper connection may cause to an electric shock!
• Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a proper outlet by an authorized specialist.
• The accessibility of the power plug must be ensured to disconnect the appliance from the power supply in case of emergency.
• Make sure that the voltage supply matches the specifications on the rating label before connecting.
• Connect the mains cable to a properly installed and earthed wall outlet.
• If the plug after installation is not accessible, a corresponding disconnect device must be available to meet the relevant safety regulations.

Reversing the door opening
If required, the door opening can be moved from the right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be disconnected from the power supply first.
NOTE:

• Ask another person to assist.

• You possibly need: screw wrench, Phillips screwdriver as well as a thin-blade screwdriver.

• Dismount the upper door hinge, lift the appliance door and set the door safely aside.

• Release and move the lower hinge pin to the opposite appliance side.

• Put on the appliance door and fix it in the intended position.

• Transfer and fasten the upper door hinge to the opposite appliance side; after unscrewing the hinge pin and have reinstalled from the other hinge side.
  Check that the door is aligned vertically and horizontally to ensure proper opening and closing of the door.

Built-in

For ventilation, an exhaust duct of approx. 38 mm depth must be provided on the appliance back.
The ventilation openings in the furniture base and building must be min. 200 cm² to ensure that heated air can be freely escape.
Mounting material

CAUTION:
Before drilling, check the furniture front for enough strength for the enclosed screw length.

1. Install the power cord so that the appliance can be easily connected after installation. Slide the appliance into the build-in opening until the stop plate (A) abuts the furniture.
2. Press the rubber seal between the appliance and built-in furniture firmly (on the side without hinge).
3. Open the appliance door. Push the appliance side, which is located opposite the hinges, against the built-in furniture. Arrange the appliance for a secure, vertical position, fix it with the supplied screws, bottom 2x (S2) and top 2x  (S1).
4. In consideration of the shown distances, hold the guide (a) at the top and bottom inside of the furniture door; mark the positions of the drill holes. After drilling, fix the guide with the screws (S1) provided.
5. Insert the cover (c) until it clicks in the guide (a).
6. Fully open the appliance and furniture door and join them together. Slide the angle (b) in the guide (a) and mark the drill holes. Remove the bracket and drill Ø 2 mm holes with about 8 mm distance to the outer door edge. Put the  racket on again; secure it with the screws (S1) provided.
7. If an aligning of the furniture door is necessary, use the slot spacing. Check if the door is arranged vertical as well as horizontal, so  that a smooth  opening and closing of the door is ensured.
8. Insert the cover (b) until it clicks on the angle (b).

Startup / Operation

Intended use
The appliance is intended for use in private households.
The appliance is suitable for cooling perishable foods such as milk, dairy products, meat, fish, eggs, margarine, various spreads and fruit and vegetables that are not sensitive to cold.
Prior to first use
CAUTION:
After transport, the appliance should be left standing upright for about four hours before connecting to the power supply. Nonobservance could lead to malfunction of the cooling system and causes an appliance breakdown.
Clean the appliance interior including all accessory parts. Consider the instructions which we provide in the chapter “Cleaning and maintenance”.
Starting the appliance

• Connect the appliance to the power supply.
• Set the operating conditions. See also the following sections.

Control overview

B1_Adjust

• Keep pressing the button for approx. 5 seconds to switch the appliance on or off.

• Press the button several times to select the power level: ↳1 → 2 → 3 → 4 → 5↲
  L1_1-2-3-4-5
  LEDs indicate the power level selection.
  B2_Mode

• Press the button several times to select the mode: ↳Smart → Super → user settings↲
  L2_Smart
  LED indicates activation of the function.
  L3_Super
  LED indicates activation of the function.

Smart: Automatic temperature control
The internal temperature automatically adjusts to the optimum way to preserve and store food depending on the ambient temperature.
Super: Quick cooling function
When activated, the appliance operates at maximum power to speed up the cooling process.
The quick cooling function switches off automatically after approx. 54 hours. The internal temperature adjusts to the preset power level.
The function can be cancelled at any time before the switch-off time expires.
Settings
If the LEDs [L1] are off, the appliance is switched off.
Switch on the appliance and select the desired power level.
The power levels [ 1 – 5 ] regulate the different values of the internal temperature.

Power level

1,| 2| lowest level, warmest internal temperature
3| | medium level, optimal operating temperature
4,| 5*| highest level, coldest internal temperature

*Beware of high setting because the maximum level may already mean “freezing point”.
Basically , the temperature changes depending on the ambient temperature (place of installation), the frequency of opening the door and the equipment. For initial  operation, first set  the lowest possible internal temperature (= highest power level) and/or activate the quick cooling function  until the appliance has reached the desired operating temperature.
It is recommended to reset to a medium power level afterwards, then you can easily make any temperature correction. A high power level also increases energy consumption.
The recommended fridge temperature for optimized food storage in the fridge center is approx. 4∼7 degrees.
Interior light
When opening the appliance door, the interior light will turn on automatically.
Alarm function
As soon as the appliance door remains open for longer than 90 seconds, 5 consecutive alarm tones sound every 30 seconds until the appliance door is closed.
Equipment
Note that the equipment varies depending on the appliance type.
The various shelves and drawers can be height adjusted (partially and model- dependent) or removed for individual storage. Practical also for cleaning purposes.
NOTE:
For the most efficient use of energy, place all shelves/drawers in their original positions.
Removing / inserting the shelves

• To remove, open the unit door completely, lift the shelf, if necessary, slant slightly and pull it out to the front.
• Safely reinsert the shelf at the desired height and push it in until the stop is reached.

Removing / inserting the door racks

• To remove the door rack, press it upwards out of the retainer or, depending on the model, first press one side inwards until this side can be pulled out upwards.
• Place the door rack flat, press down both sides of the rack so that it locks into the retainer.

Removing / inserting the drawers

• To remove the drawer, pull it out to the front, in cline it if necessary and remove it.
• Insert the drawer, if necessary, lift the front part of the drawer slightly and push it in completely.

Egg tray
Depending on the model, a tray for storing eggs is included with the appliances.
Storing food
NOTE: Recommendation!
To guarantee that the temperature is low enough, you should pre-cool the appliance a few times before initial loading foods.
CAUTION:
Always pay attention to the storage instructions on the sales packaging.
Always store food covered or packed to prevent drying-out and transfer of odor or taste onto other food items. You may pack the food with e.g.

• Polyethylene plastic bags or foil
• Plastic bowl with lid
• Special plastic covers with elastic strip
• Aluminum foil

To avoid contamination of food, respect the following instructions:

• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
• Clean regularly surfaces that can come in contact with food and accessible drainage systems (see “Cleaning and maintenance”).
• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
• Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice-cream and making ice-cubes.
• One- , two- or three-star compartments are not suitable for the freezing of fresh food.
• If the appliance is out of use for long period, follow the instructions under “Switching off”.

Temperature zones and storage recommendations
The optimal cooling temperature is around 4∼7 degrees for the central area of the cooling. Different cooling zones are created by the air circulation. Regardless of the power level, cold air drops off.

• The coldest zone is on the cooling rear wall and in the lower cooling part. Recommended for storing perishable foods such as meat, fish and sausages at around 2∼3 degrees. Be sure to pack food well or cover it appropriately.
• About that it becomes less cold. For dairy products such as yoghurt, cheese and co., the center of the cooling is just the right temperature at around 4∼7 degrees.
• Well-packed leftovers or preserves needs less cooling. The upper cooling part at around 6∼8 degrees could be the right place.
• The cooling door is one of the warmest locations. The upper racks are good location for food that needs moderate cooling, such as butter and eggs. There is space for drinks in the lower door racks.
• The vegetable box (depending on model) is suitable for fruit and vegetables at a temperature of around 8 degrees, depending on the cooling temperature. To make especially delicate fruits and vegetables feel comfortable, a glass shelf above the drawers retains the falling cold and prevents moisture loss.

Operating noise

Switching off
To switch off the appliance, keep pressing the button (B1) for approx. 5 seconds.
If the appliance is out of use for long periods:

• Remove the appliance content.

• Disconnect the power supply.

• Defrost (model dependent) and clean the appli-
  ance thoroughly (see ”Cleaning and maintenance”).

• Leave open the appliance door to avoid formation of mold and unpleased odors.

Tips for energy saving

• Disconnect the appliance from the power supply if it isn’t in use.
• Do not install the appliance near stoves, heaters or other heat sources. In case of higher ambient temperatures, the compressor will run more frequently and longer.
• Ensure enough ventilation at the bottom and rear side. Never block ventilation openings.
• Place all shelves, racks or drawers (depending on the model) in their original position.
• Adjust the temperature not colder than necessary.
• Allow warm food to cool before placing it in the appliance.
• Open the appliance door only as necessary.
• Defrost the unit regularly (model dependent).
• The seal of the appliance door must be completely intact, so that the door closes properly.

Cleaning and maintenance

WARNING:

• Always disconnect the appliance from the power supply before cleaning and user maintenance.

• Do not use steam cleaners for cleaning the appli-ance; moisture could enter electrical components.
  Risk of electric shock! Hot steam could damage the plastic parts.

• The unit must be dry before restarting operation.

CAUTION:

• Do not use a wire brush or other sharp, abrasive items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.

Cleaning the appliance including interior
To keep dirt and germs at bay, clean the appliance regularly!

• First clear out the contents of the appliance and store it in a cool place. Remove all moving parts such as shelves or drawers.
• Clean the interior of the appliance, the exterior surfaces and the accessories with lukewarm water and a mild cleaning agent; or with a clean, damp microfiber cloth without cleaning agent.
• Clean the thaw water discharge channel / opening carefully e.g. with a pipe cleaner.
• After everything has dried thoroughly, you can put the appliance back into operation.
• Depending on the model: At least once a year, wipe off the dust that has accumulated on the rear wall of the unit and on the condenser (metal grille). Use a soft brush or a vacuum cleaner for this purpose.

Cleaning / replacing the door seal
Regularly check the seal for dirt, damage and air tightness!
Checking the seal for air tightness

• Clamp a thin piece of paper at various points for testing. The paper must be equally difficult to pull through at all points.

Cleaning the gasket

• Clean the gasket with clear water only!
• CAUTION, grease and oil makes the seal porous and brittle. Wipe up grease or oil immediately with a damp, clean cloth.

Replacing the seal

• Remove the contents of the appliance and, if necessary, defrost the unit. Pay attention to how the old gasket is attached. Most gaskets are only plugged in.
• Remove the worn gasket rubber by removing it from the groove. Carefully clean the appliance door and the groove below the rubber and remove any adhesive residue.
• Attach the new rubber. If necessary, heat the rubber seal with a hair dryer or hot water and shape it by hand. Start pressing the gasket in one corner and then press it around the door into the groove provided for this purpose.
• Continue to check the seal regularly for dirt and damage!

Defrosting
CAUTION:
Never use metal objects (e.g. knifes) to remove ice from the evaporator, it can be damaged.
During the defrosting process the water drops drain off at the back wall of the cooling chamber. The thaw water running through a channel, is collected in a drip tray located on the compressor, from which it then evaporates. Make sure  that the defrost water drain channel does not become clogged. A slight formation of ice on the interior rear wall during operation is normal.
A permanently high power level can lead to increased ice formation → set a lower power level and wipe the interior of the appliance dry.
Changing the light
CAUTION:
Do NOT remove the cover of the light. The LED light may be replaced / repaired in case of failure / defect only by an authorized specialist. Notes for the authorized specialist!
Lamp data: DC12V, 1.5 W
This product contains a light source of energy efficiency class G.

• Disconnect the appliance from the power supply!
• Loosen the decorative cover (Fig. 1).
• Unscrew and remove the light cover (Fig. 2).
• Unscrew and remove the cover of the main circuit board (Fig. 3).
• Disconnect the plug connection (Fig. 4).
• Unlock the plastic clip (Fig. 5).
• Remove the light (Fig. 6).
• Replace the defective light and reassemble correctly in reverse order.

Replacing the door hinge
If the appliance door starts to stutter, crack or jam when you open it, it is probably due to a worn or damaged hinge.
It is recommended to replace all door hinges at the same time, otherwise the next repair will soon be beckoning.

• Replacing the door hinge
• If the appliance door starts to stutter, crack or jam when you open it, it is probably due to a worn or damaged hinge.
• It is recommended to replace all door hinges at the same time, otherwise the next repair will soon be beckoning.

Troubleshooting

Before you contact an authorized specialist
Problem / Cause / Action
Appliance is not working properly or at all
– Check the power supply / temperature setting /ambient temperature.
– Unblock the ventilation openings, install the appliance freely.
Loading is too warm
– Check the temperature setting / ambient temperature.
– A large quantity of warm food has been stored in the unit in the last 24 hours.
– The appliance door is not closed properly, check the door seal.
Problem / Cause / Action
Loud noise during operation
– Check that the appliance is level.
– See “Operating noise”.
Water on the appliance bottom
– Check the temperature setting / water discharge channel or opening.
Light does not work
– Check the power supply.
– See “Changing the light”.
NOTE:
If a problem persists after following the steps above, contact your trader or an authorized technician.

Technical data

Climate class SN/N/ST/T: this appliance is intended to be used at ambient temperature ranging from 10°C to 43°C.
Electrical connection……… ……………………………..
Power voltage: …………………….220-240 V~ / 50 Hz
Rated power: ………………………..….…..……….80 W
Rated current: …………………………..…..………0.6 A
Dimension H x W x D / Weight…..…… ………………..
Appliance size: ……..….……..122.0 x 54.0 x 54.0 cm
Net weight: ……………………….……approx. 36.0 kg
For more information about the product, scan the QR code on the supplied energy label and/or visit the official website of the product data bank: https://eprel.ec.europa.eu 

The right to make technical and design modifications during continuous product development remains reserved.
This appliance has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Disposal

Meaning of the “Dustbin” symbol
This symbol indicates that this product must not be disposed of with household waste in accordance with the Waste Electrical and Electronic Equipment Directive (2012/19/EU) and national legislation. Improper handling of waste electrical and electronic equipment can have negative effects on the environment and human health due to potentially hazardous substances that are often contained in waste electrical and electronic equipment.
Consumers are legally obliged to dispose of electrical and electronic appliances separately from unsorted municipal waste at the end of their service life. By disposing of this product properly, you are also contributing to the effective utilization of natural resources.
Information on collection points for old appliances can be obtained from your local authority, the public waste disposal authority, an authorized body for the disposal of old electrical and electronic appliances or your waste collection service.
This product must be returned to a designated collection point. This can be done, for example, by returning it when purchasing a similar product or by hand- ing it in at an authorized collection point for the recycling of old electrical and electronic equipment. The return of old appliances is free of charge. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.
Before disposing of the product, remove all batteries and rechargeable batteries as well as all lamps that can be removed without destroying them.
Please note that you are responsible for deleting personal data from the product to be disposed of.
WARNING:
Remove or destroy any existing latches and bolt locks when you take the appliance out of operation or dispose of it.

C. Bormann GmbH
www.bomann-germany.de
Made in P.R.C.

Documents / Resources

| BOMANN 7811D Built In Larder Household [pdf] Instruction Manual
7811D Built In Larder Household, Built In Larder Household, Larder Household, Household
---|---

References

• service.com is for sale | www.brandforce.com
• Bomann Startseite
• Bomann Service
• Bomann B2C

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>