SUZOHAPP 49-3305-02 LCD Monitor Instruction Manual

SUZOHAPP 49-3305-02 LCD Monitor

Product Specifications

• Product Name: TG02H Alpha Numeric Serial/USB Printer
• Price: $161.29
• Includes: Paper Arm
• Part Number: TG02H-NH*
• Additional Information: This printer does not come with cables. Paper rolls and cables are sold separately.

Product Usage Instructions

Setting Up the Printer

• Ensure you have the necessary cables (power cable and serial cable) as mentioned in the product description.

Connecting the Printer

• Connect the power cable to the appropriate power source and the serial cable to your device for communication.

Loading Paper

• Insert the paper roll (P/N 27-0207-00) into the printer following the instructions provided with the paper roll.

Powering On the Printer

• Turn on the printer using the power cable connected to a power source.

Printing

• Send print commands from your device to the printer to generate alphanumeric prints as required.

FAQ

• Q: Does the printer come with cables?
• A: No, the printer does not come with cables. You need to purchase the power cable (P/N 70-0042-00) and serial cable (P/N 70-1988-00) separately.
• Q: What type of paper roll is compatible with this printer?
• A: The compatible paper roll part number is 27-0207-00, which needs to be purchased separately.

TG02H Alpha Numeric Serial/USB Printer, Paper Arm, No Cables

**Part Number: TG02H-NH***

• 57mm Receipt/Ticket Printer
• Extremely compact and versatile receipt printer that allows an easy installation and panel mounting
• 200dpi best printing quality
• Paper width 57mm
• Speed > of 80mm/ sec
• Up to 70mm paper roll diameter
• RS232 and USB interface (serial TTL with welding)
• Highly reliable tear-off
• Sensors: head temperature, paper presence, near paper end, anti-jamming
• Power supply 12V and 24V

This printer does not come with the cables; Does not include the paper roll, P/N 27-0207-00; For power cable see P/N 70-0042-00, #26600000000024, and for serial cable see P/N 70-1988-00, #26500000000311

VisionPro 21.5″ LED LCD W/Clear Glass HDMI, DVI, & VGA

Part Number: 49-3305-02

• Minimum order quantity: 2

Marquardt Coin Switch Silver 6 Grm .110 QC W/ Wireform

Part Number: 42-1103-90

• Primarily used on 42-0105-90: assemble wire form and nut to switch
• Slam-a-winner
• Monster Drop

8-Line Harness
Part Number: 95-2835-00

• Includes 36-pin connector

19.42″ 3M Microtouch Cleartek2 Flat T/S USB & Serial Control

Part Number: 49-0505-00

• New 3M Dual Controller (works on both USB and Serial)
• 98-0003-3819-8 SCT3250 19″ sensor with mated dual mode EX113 controller
• This new model is a direct replacement for the Serial model (SHG PN 49-2850-00 3M PN 17-8891-223) and USB model (SHG PN 49-2851-00 3M PN 17-8891-226)

VisionPro 27″ Edge Lit Front 12V RGB W/DP & HDMI

Part Number: 150LG27003

• Rigid high-quality PCB-mounted LEDs, no adhesive strips, no hotspots
• RGB LED interface (solid colour; addressable LEDs in another model)
• True-flat zero-bezel design.
• Full-HD 1920×1080, WVA 178˚x 178˚ for landscape or portrait usage
• Diagonal Size: 27″
• Aspect Ratio: 16:9
• Active Area: 597.6 x 336.15mm
• Dimensions: 660.0 x 407.0 x 51.0mm (26in x 16in x 2in)
• Video Interface: VGA + DVI standard, HDMI and DisplayPort are available
• Touch/Non-Touch Type: Printed 3mm Tempered Glass
• Warranty: 1-year
• Regulatory Approvals: CE, FCC

Wells-Gardner 32″ LCD Monitor

Part Number: 49-3259-WG

• Overall Dimensions: 19.558 in. (H) x 29.097 in (W) x 3.135 in (D)
• Active Display Area: 15.433 in (H) x 27.468 in (W)
• Max. Resolution: 1920 X 1080
• Contrast Ratio: 3000:1
• Brightness: 350 cd/m2
• Response Time: typical, 6.5ms
• Viewing Angle: Horiz./Vert. 178/178 degrees
• Video Interface: VGA & DVI-D
• Horizontal Frequency Range: 31 – 70 KHz
• Vertical Frequency Range: 60Hz
• Electrical Safety: UL CSA
• RF Emission Limits: FCC Class A
• Electrostatic Discharge Immunity: EN6100-4-2 Class A
• RoHs: RoHS Directive 2011/65/EU
• Analog & Digital Scan Frequency: 31 – 70KHz
• Auto Size Adjust: 31 – 70KHz
• Power consumption: 90 watts

8-Line Harness with Buttons for Pog

Part Number: 95-0634-02

• Update your old and worn-out harness
• Made from high-quality material
• Harness will work on all POG wooden cabinets
• The AC Plug is set up for a CRT Monitor
• Other replacement components are available

VisionPro 22″ LCD W/ IR Touch & USB/Serial Touch

Part Number: 49-22IR-03

• For Use In PA Skill Games
• Can also be used in: Miele Spartan Cabinets (with bezel removed)
• Active Display Area: 18 3/4 in (H) x 10 1/2 in
• Outline Dimension: 23 in (H) x 18 11/32 (W) x 2 in (D)
• 1920 x 1080 pixels resolution
• CGA-VGA resolution
• Low power consumption
• RGB and DVI
• LED Backlight System
• Touch Screen – Infrared
• USB/Serial
• Aspect Ratio: 16:9 or 16:10 (auto-scaling)
• Removable Brackets

22″ Wells LED TN W/ VGA, DVI WGF2258SD-J27H

Part Number: 49-3221-02

• Aspect Ratio 16×10
• Viewing Angel (H/V) 170/160
• Video Interface: VGA/DVI-D
• Analog Scanning Freq: 30-80kHz
• Power Consumption 30W
• RoHs Compliant

T5 LED Tube Under Cabinet Light Fixture

Part Number: 91-0654-0

• 80 LEDs, frosted cover, light can be plugged in on either the left or right side
• Can connect up to 6 lights end to end on one power cord with supplied connector
• 2ft 110v black line cord with inline power switch
• Two mounting clips
• One protective end cap (covers the unused end on light)
• 22 inches (568mm) long
• Cool white 6150k-6500k
• 10 watt
• Cri:70, power factor .95
• Lifetime: 35,000 hours
• Beam angle 120 degrees
• 3-year warranty

Super “Jamma” Cable

**Part Number: 80-5000-00***

• Jamma edge connection with wires for power, speakers, coin switches, start switch and controls
• Universal design for 2-player games
• 5′ length – fits any cabinet, including kiosks
• Same as Jamma Cable but complete with a 2′ long Molex-connected control panel harness with .187″ connectors
• Labeled for ease of identification

*If speaker wire is required, use PN: 80-5100-00

Keypad Metal 12 Key Alpha/Numeric with 7-Pin Connector

Part Number: 95-1196-00

• Upgraded assembly to improve waterproofing, material in PCB is now fibreglass
• RoHS Compliant

7-Digit Meter 12V W/ Diode & Mounting Bracket

Part Number: 42-0092-20

• 7-digit meter
• Black case
• 12 volt
• 1.1 watts
• 093 Molex connector
• Bracket mounts are the same size as the KEP meter
• Includes mounting bracket & internal diode

Entropy TRP Blank Coin Door W/ Card Reader Cutout

Part Number: 42-8194-10

• 8-3/4 high 7-1/2 wide
• Includes cutout for card reader

CONTACT

• Contact Your Sales Representative to Order Now!
• SUZOHAPP
• 601 Dempster Street, Mt Prospect, IL 60056 – Toll-Free: 888-289-4277 – [email protected] – na.suzohapp.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>