Soundcore Bluetooth Earphones Liberty Air User Manual
- June 7, 2024
- Soundcore
Table of Contents
Soundcore Bluetooth Earphones Liberty Air User Manual
Wearing
- Insert the earbuds into the inner canal if your ears.
- Turn and find the most comfortable position.
Charging
- Remove the film on the earbuds when taking them out of the charging case for the first time.
- Open or close the charging case to activate the LED battery indicator.
Charging case indicator (When opened or closed)
Flashing white (for 5 seconds)| | Display power level
| Slow Flashing white (for 5 seconds)| <5% power level
| Steady white| 5%.-30% power level
| Steady white| 30%-70% power level
| Steady white| >70% power level
Charging case indicator (Connected to power source)
| Steady white (for 1 second)| Charging
| Flashing white| 0%-30% power level
| Second LED indicator flashing white| 30%-70% power level
| Third LED indicator flashing white| >70% power level
| Steady white| Fully charged
Earbud status indicator
| Flashing red (once every minute)| Low battery
| Steady white| Charging
| Off| Fully charged
To preserve battery lifespan, fully charge at least once every 45b days.
Turn on / Off
- The earbuds switch on automatically when taken out of the charging case. To manually switch on, tap the multifunction touchpad on both your earbuds once.
| ON| Flashing white for 1 second (Earbud status indicator)
---|---|--- - The earbuds switch off automatically when placed back in the charging case
| OFF | Flashing red for 1 second (Earbud status indicator) |
|---|
Pairing
True Wireless stereo connection
| Slow flashing white (Breathing like)| True Wireless Stereo pairing mode
---|---|---
| Steady white (For 1 second)| True Wireless Stereo connection is successful
(the right earbud is connected to the left earbud).
Bluetooth connection (Device)
Enter pairing mode when earbuds are switched on.
| Rapidly flashing white| Pairing mode
---|---|---
| Slow flashing white| Connection to a device
Controls
| Tap the multi-function (iq touchpad on the right earbud twice| Play / pause
| Tap and hold the multi-function touchpad on the right earbud for 2 seconds|
Next track
| Tap and hold the multi-o • function touchpad on the left earbud for 2
seconds| Previous track
| Control volume
via the connected device| Volume up / down
| Tap the multi-function touchpad on the right earbud twice| Answer / End call
| Tap and hold touchpad on right earbud for 2 seconds| Reject call
| Tap the multi-function touchpad on right earbud twice| Put current call on
hold and answer incoming call
| Tap and hold touchpad on right erbud for 2 seconds| Switch between held call
and active call
| Tap and hold touchpad on right erbud for 2 seconds| Switch between held call
and active call
| Slow flashing white (Right earbud only)| On a call
| Slow flashing white (Right earbud only)| Incoming call
Tap the multifunction touchpad on the left earbud twice| Activate Siri / Other
voice control software|
–| –| –| –| –
Reset
How to reset the earbuds if you can only hear sound on one side:
- Delete “Soundcore Liberty Air” from your device’s Bluetooth list, and turn off the Bluetooth on your device.
- Place one earbud in the charging case and make sure it’s charging. The LED indicator will be solid white.
- Tap and hold the multifunction touchpad of the earbud (currently in the charging case) for 7 seconds until the LED indicator flashes red 3 times. This clears the pairing information.
- Put the other earbud in the charging case and repeat step 3.
- After the pairing information is cleared, take both earbuds out of the charging case and place them next to each other. If TWS pairing is successful the LED indicator on the left earbud will start flashing slowly and the LED indicator on the right earbud will flash rapidly.
- Turn on Bluetooth on your device and search for “Soundcore Liberty Air” to connect.
Specifications
Specification are subject to change without notice
Input| 5 V=0.5 A
Charging time| 2 hours
Playtime (varies by volume level and content)| 5 hours
Weight (product net weight)| 55 g/ 1.9 oz
Impedance| 160
Driver (full range)| 6 mm x 2
Frequency response| 20 Hz – 20 KHz
Bluetooth version| V 5.0
Range| 10 m/33 ft
Customer Service
+1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00
+81 03 4455 7823 9:00 – 17:00
+86 400 0550 036 9:00 – 17:30
+82-2-6464-7088 9:00-17:30