LAB GRUPPEN 2 x 60 Watt Commercial Amplifier Energy Star Certification User Guide
- June 7, 2024
- Lab gruppen
Table of Contents
LAB GRUPPEN 2 x 60 Watt Commercial Amplifier Energy Star Certification
User Guide
CA602
2 x 60 Watt Commercial Amplifier with Energy Star Certification
- 2 x 60 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Energy Star* certified design conserves energy and drastically reduces operational cost
- Direct drive, constant power technology for superior audio performance and reliability
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Individual front panel master volume and bass/treble controls for each output
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Front panel power control button for direct access
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euro block type amplifier input and output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- 10-Year Warranty Program*
- Designed and engineered in Sweden
The CA602 2 x 60-Watt Commercial Amplifier provides the perfect solution for
commercial and industrial applications requiring great sounding distributed
audio coupled with power conservation and reduced operating expense. Equipped
with 2 independent audio channels, the CA602 provide amplification to 2
separate zones. Capable of delivering high-quality sound over both Low-Z (4/8
Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme
flexibility on every channel. The CA602 is easy to install and operate
– even for non-technical personnel. Simply put, the CA602 is ideal-suited for
bars & restaurants, retail destinations, hotels, corporate, education or other
venues needing background music and/or a public address system.
*Energy Star Certified**
Not only does CA602’s direct drive constant power technology provide superior
audio performance and reliability, it also consumes less mains power than
competing models, which has earned it Energy Star certification. This amazing
technology makes it possible to
design and build powerful amplifier systems that not only save money on the
electrical bill,
but also reduce the requirements and cost at the installation for the mains
supply. In fact, it is
likely that installation can be done utilising the in-place mains
infrastructure. This adds up to
significant installation and operational savings and protects the environment.
Easy to Install
The CA602 comes equipped with rubber feet, enabling the amps to be placed on a
desk, shelf or any clear surface without any additional installation
requirements. However, optional rack mounting
hardware is also supplied, allowing one or several models to be housed and
protected inside an enclosure. This adds extensive flexibility as a single
product can be housed in a half 19″ rack or full rack enclosure as well as a
pair of amplifiers can easily be mounted side-by-side in a single rack space.
With the included brackets the unit can also be mounted to a wall or under a
table/shelf.
Automatic Power On/Off
The CA602 has a flexible power scheme with seamless and automatic power on/off
based on the input signal, which reduces consumption when a signal is not
present. With virtually zero configuration required, an energy smart and
hassle-free amplifier system can easily be set up for hands-off operation. If
the CA602 is powered on but does not receive an input signal for 20 minutes,
the system automatically enters sleep mode to reduce power consumption. As
soon as the Auto Ramp circuit detects a signal, the system powers on and
normal operation resumes. The amplifier can also be instantly forced into
standby mode or awakened via the front panel power button.
Sublimely Simple Controls
CA602’s controls are sublimely intuitive, allowing the operator to quickly
make adjustments. The front panel power button and Master volume knobs are
easily accessible, enabling virtually anyone to operate the system. Bass and
Treble controls are also available for fine tuning – but require a tool when
making changes.
Easy to Hook Up
For connecting a balanced source such as a mixer or audio processor, a
standard 3-pin Euro block Input socket is provided. Alternatively, RCA cables
can be connected for unbalanced stereo sources (summed to mono), such as
players, phones or computers, however only one input source should be used at
a time. Loudspeaker Output is provided in the form of a standard 4-pin Euro
block socket.
Output Configuration
Intuitive configuration of the flexible output channels is provided directly
adjacent to the rear panel Euroblock output connector with dip switches, which
allow selection of 100 V, 70 V, 8 Ω, or 4 Ω operation. This configures both
the maximum voltage of the output and the gain through the device. An
individual control engages the built-in high-pass filter, which should be used
on all constant voltage systems to avoid saturation on transformer-enabled
loudspeakers and to help maintain sound integrity.
Expandable Remote Control
The RJ45 receptacle per channel, on the rear panel opens up a broad range of
remote control options, including the CRC-V Series of wall controllers and a
stylish tabletop controller, the LAB.LEVEL. All can be interconnected via
inexpensive and readily-available Ethernet cabling.
System Scalability
Commercial installs vary widely in scope and often grow and change over time.
The CA602 is part of a family of products that provides both single and dual
zone products that are perfect for building out a system to any size. With its
individual zone volume and remote control capabilities, the CA602 is an ideal
building block for a dynamic and scalable system solution.
Real-World Energy Savings
The CA602 2 x 60-Watt Commercial Amplifier makes it easy to bring highest-
quality music and announcements to commercial and industrial environments in
an easy to integrate – and even easier to operate system. Plus, with features
such as its Auto Ramp and revolutionary direct drive constant power
technology, the Energy Star certified CA602 can generate enough energy savings
to pay for itself in virtually no time at all.
You Are Covered
We always strive to provide the best possible Customer Experience. Our
products are made in our own Music Tribe factory using state-of-the-art
automation, enhanced production workflows and quality assurance labs with the
most sophisticated test equipment available in the world. As a result, we have
one of the lowest product failure rates in the industry, and we confidently
back it up with a generous Warranty program.
Technical Specifications
Architecture & Engineering Specifications
Amplification and performance
The power amplifier shall provide two discrete channels of amplification, with
each channel capable of independently driving either low-impedance or high-
impedance (70/100 V) loads. Maximum output with both channels driven shall be
60 W per channel into 4, 8 Ohm as well
as 70 and 100 V mode. Output mode shall be configurable and shall adapt both
gain and output voltage limiter for the given load. Each output shall have a
switchable high-pass filter with a cut off frequency of 80 Hz. The amplifier
shall exhibit the following performance parameters: frequency response shall
be 20 Hz to 20 kHz +0.5/-1 dB, channel separation shall be greater than 85 dB,
signal-to-noise ratio shall be greater than 97 dBA and THD at 1/8th of rated
power shall be less than 0.05 %. The amplifier shall have built in thermal
protection, over current protection, DC protection, high frequency protection
and controlled start and shutdown behavior.
Connectors, Controls and Indicators
The following connectors and controls shall be provided on the rear panel of
the amplifier. The per channel input connectors shall be electronically
balanced, 3-pin detachable screw terminals and stereo RCA connectors with
optimized input sensitivity. The output connector shall be a 4-pin detachable
screw terminal. The output mode configuration and high-pass filter shall be
configurable with DIP switches. Remote volume control shall be available as
two RJ-45 connectors for integration to external volume control
potentiometers. On the front panel of the amplifier, a per channel detented
volume knob shall provide level adjustment from -infinity to 0 dB. Also, a per
channel base and treble EQ control shall be available that shall require a
tool to operate. A power switch shall toggle between On and Standby power
states. The following LED indicators shall be provided on the front panel of
the amplifier: One tri-color power indicator and one, per channel indicator
for signal present, limiter and fault active.
Power Supply, Protection and Cooling
The power supply shall be a universal type (AC line input between 100 and 240
VAC at 50 or 60 Hz) and be supplied through a standard IEC connector on the
rear panel of the amplifier. The power supply shall provide auto power down
and auto power on with signal present to preserve
energy consumption. The efficiency of the amplifier shall be high and the
standby power consumption shall be less than 1 W. The amplifier shall be
Energy Star 3.0 certified. The amplifier shall be convection cooled and have
no ambient noise.
Physical and approvals
The amplifier shall be the following dimensions (H x W x D) 44 x 218 x 299 mm
(1.7 x 8.6 x 11.8″). The weight shall be no more than 2.4 kg (5.3 lbs). The
chassis shall be brushed black anodized aluminum chassis with black painted
steel bottom. With the included bracketry the amplifier shall be possible to
mount on a surface or in a half width 19” rack, full width 19” rack as a
single unit or combined with another unit in the same series. The amplifier
shall be approved for use as specified by CE, cTUVus, PSE, CCC, RoHS and FCC
part 15 Class B. The amplifier shall have a warranty of 10 years or more.
The amplifier shall be the Lab.gruppen CA602
Dimensions
For service, support or more information contact the Lab.gruppen through
www.labgruppen.com.
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein.
Technical specifications, appearances and other information are subject to
change without notice. All trademarks are the property of their respective
owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC
Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are
trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music
Tribe Global Brands Ltd. 2019 All rights reserved.
*All third-party trademarks are the property of their respective owners.
Their use neither constitutes a claim of the trademark nor affiliation of the
trademark owners with Music Tribe. Product names are mentioned solely as a
reference for compatibility, effects and/or components. Warranty details can
be found at musictribe.com.
Read More About This Manual & Download PDF: