VONYX Ringlamp Floorstand Instruction Manual

: June 7, 2024
: VONYX

Table of Contents

UNPACKING INSTRUCTION
SETTING UP
CONTROLS
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RL25 Ringlamp + Floorstand
Ref. nr.: 188.223

INSTRUCTION MANUAL

Congratulations on the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

– Prior to using the product, please ask for advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
– The product contains voltage carrying parts. Therefore do NOT open the housing.
– Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
– Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
– The product is not suitable for continuous use.
– Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
– When unplugging the product from a mains outlet, always pull the plug, never the lead.
– Do not plug or unplug the product with wet hands.
– If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
– If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. – Do NOT connect the product to a rheostat or dimmer.
– To avoid fire and shock hazards, do not expose the product to rain and moisture.
– All repairs should be carried out by a qualified technician only.

– During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
– If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
– To prevent accidents in companies, you must follow the application guidelines and follow the instructions.
– Do not repeatedly switch the product on and off. This shortens the lifetime.
– Keep the product out of the reach of children. Do not leave the product unattended.
– Do not force the controls.
– If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
– Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
– Keep away from electronic equipment that may cause interference.
– Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
– Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
– Keep the original packing material so that you can transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the product. This would also invalidate your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by the disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain the packing material for inspection if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to the factory, it is important that the product be returned to the original factory box and packing.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

SETTING UP

Adjust the tripod to the desired height by extending the tubes. When the tripod is set to the desired height, firmly tighten the clamps.
Attach phone holders to the phone stand by tightening the screws, then fixate the phone stand on top of the tripod. Finally, fixate the ring lamp on top of the phone stand by tightening the mounting screw.
Attach the gooseneck phone holder to the ring lamp. This phone holder allows you to film/photograph from a variety of angles.
Insert the microphone stand into the microphone clamp before attaching the clamp to the tripod tube.
Attach the tray, by fixing the tray clamp to the tripod tube and tighten the clamp screw.

CONTROLS

ON/OFF
Press this button to turn on/off the ring lamp lighting.
COLOR TEMPERATURE
Switch color temperatures by pressing this button. Three options are available: warm, natural, and cool. Warm is set as the default temperature.
BRIGHTNESS
Press the “+” or “-“ buttons to change the brightness of the emitted light. 10 increments of brightness are available.

TECHNICAL SPECIFICATION

Dimensions Internal: 510 x 510 x 1850mm
Max height: 1.85m
Weight (kg): 1.60

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject: