digitech Headphones Bluetooth Technology FM Radio User Manual

digitech Headphones Bluetooth Technology FM Radio User Manual

Box Contents:

Product Diagram:

Operation:

Bluetooth Pairing:

1. Press and hold the power button for up to 3 seconds to turn the headphones on.

2. Once the headphones have been turned on; the LED indicator should be flashing red and blue.

3. Open the settings of your smart phone and ensure Bluetooth”‘ is turned on.

4. Once your Bluetooth is enabled; Scan for devices and the Bluetooth name Digitech AA-2128 should appear.
   Bluetooth Name: Digitech AA-2128

5. Press the Digitech AA-2128 on the Bluetooth device list and your smartphone should show that it is connected.

6. You will hear a beeping sound from the earphones indicating it is connected. The blue LED will flash slowly. The battery status can also be shown in your Bluetooth settings.

Note : Pairing will last up to 10 minutes, if you do not finish pairing in this time; then you will need to repeat the pairing process.

Bluetooth Hands-Free:

Music Playback:

FM Radio:

1. Press and hold the power button for up to 3 seconds to turn the headphones on.
2. Press the mode button once to switch to FM radio mode. You will hear the sound “FM mode”.
3. The FM radio station will begin at 87.5MHz.
4. Press the play/pause button to begin automatically searching for a radio station. As soon as a radio station is found; it will stop on that station.
5. Press the play/pause button to keep searching for radio stations.
6. Press the previous or next track buttons to manually switch between frequencies.

microSD Card Playback:

1. Press and hold the power button for up to 3 seconds to turn the headphones on.
2. Insert a microSD card up to 64GB into the micro SD card slot.
3. Once the microSD card has been inserted; the music will be played automatically from the microSD card. Alternatively, you can press the mode button until you hear the words “TF Card Music”.
4. You can use the play/pause buttons or next and previous tracks while in this mode.
5. The music audio formats supported are MP3 and WAV.

Note : The microSD card needs to be formatted to FAT32 or exFAT.

3.5mm Audio Input:

1. Insert the 3.5mm to 3.5mm auxiliary cable to the 3.5mm input socket located at the bottom of the headphones.
2. The headphones aren’t required to be turned on in this mode. It will automatically play once your device is connected and playing audio.
3. You can now play audio from your device such as a smartphone, tablet, computer or MP3 player.

Note : All functions can’t operate in this mode such as play/pause, volume adjustment, skipping tracks and the microphone.

LED Status Indicator:

Charging:

1. Insert the USB charging cable in a suitable SVDC mains power adaptor (not included) or a suitable USB charging port such as a computer.
2. Insert the micro B USB plug of the USB charging cable into the USB power socket of the headphones.
3. The LED status indicator will light up red once charging has started.
4. Once fully charged; the red LED status indicator will turn off. It takes up to 2 hours for a full charge.

Note : It is required to turn off the headphones while charging.

Troubleshooting:

Safety:

1. Do not open the headphones to prevent the unit from damage.
2. Keep the headphones away from high temperatures as it may damage the device.
3. Do not expose the headphones to water or liquids to prevent the unit from damage.

Features:

• Bluetooth Wireless Technology
• FM Radio & microSD Card Slot
• Rechargeable Battery
• In-Built Microphone
• 3.5mm Auxiliary Jack

Specifications:

Bluetooth ® Version: 4.2+EDR
Transmission Range: Up to 1 Om
Frequency Response: 20Hz-20KHz
Sensitivity: 98dB±3dB
Mic Sensitivity: -42dB±3dB
Impedance: 320
FM Frequency: 87.5-108.0MHz
Playback Time: 8-14 Hours
Talk Time: Up to 10 Hours
Standby Time: Up to 180 Hours
Charging Time: Up to 2 Hours
microSD Capacity: Up to 64GB
microSD Format: FAT32/exFAT
microSD Audio Format: MP3, WAV
Battery: Li-Ion 3.7V, 400mA
Power: SVDC, 1 A (Micro B USB)
Power Consumption: S0mA (Max)
Dimensions: 190(H) x 180(W) x 78(D)mm

Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd , Rydalmere
NSW 2l16Australia
Ph: 1300738555
lnt’I: +61288323200
Fax 1300 738 500
www.techbrands.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>