Govee RGBIC LED Strip Lights User Manual

: June 7, 2024
: Govee

Table of Contents

At a Glance
Specifications
Installing Your Strip Lights
- Preparation Before Installing
- Installing Steps
Controlling with the Control Box
Downloading the Govee Home App
Connecting the Strip Lights to the App
Troubleshooting
Customer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Govee RGBIC LED Strip Lights User Manual

At a Glance

Strip Lights|

2

---|---
Power Adapter|

1

User Manual|

1

Service Card|

1

Specifications

Length|

2x5m/2×16.4ft

---|---
Lighting Color|

RGBIC

Waterproof|

No

Control Method|

App & Control Box

Power Supply|

Adapter 12V

Installing Your Strip Lights

Preparation Before Installing

Unpack the box and check all items listed in the packing list.
Plug the adapter into the power outlet to check whether the lights turn on.

Installing Steps

Wipe the surface to make sure it’s clean and dry.
Peel off the protective film on the tape, stick the strip on and press over it firmly.
Reinforce via clips around corners.
Connect the power brick to the strip and the adapter. Peel off the protective film on the tape to stick it on.
Power on the strip lights and begin using.

Controlling with the Control Box

Controlling with the Control Box Inductions

Button|

Function

---|---
On/Off| Turn the light on/off.
Color Changing| Press to cycle through 9 colors.
Music Mode/ Brightness Adjusting| Press to enter music mode.

Press and hold to cycle through the 6 brightness levels.

Downloading the Govee Home App

Download the Govee Home app from App Store (iOS devices) or Google Play (Android devices).

Notice: You need a smartphone running iOS 9.3 (or above) or Android 4.4 (or above).

Downloading the Govee Home App

Connecting the Strip Lights to the App

Turn on Bluetooth in your mobile phone;
Open Govee Home app and tap “+” icon in the top right corner;
Select “H6126” in the device list;

Troubleshooting

The adhesive tape is not strong enough.
- Make sure the installation surface is clean and dry.
- Firmly press over the strip after sticking.
- Reinforce the installation via more clips and tapes.
The control box doesn’t work.
Re-plug in the adapter port and try again.
Cannot connect to Bluetooth.
- Do not skip Bluetooth connection in the app.
- Make sure Bluetooth in your mobile phone has been turned on.
- It may be caused by incompatibility between the phone system and the app. Please change a mobile phone and connect again.
- Re-power on the strip and re-turn on Bluetooth in your phone to try again.
- Keep the distance between the strip and the phone less than 1m/3.28ft while connecting.
- Keep obstructions between the strip and the phone as few as possible.
The strip doesn’t match the same color./Some lamp beads don’t light up.
Please contact Govee support team in time for return.
he strip lights don’t work.
- Pull out every connective part of the strip lights and firmly re-connect them.
- Tap On/Off button on the control box or app to check whether it is a strip quality issue.
Cannot sync to the music beat.
- Please keep the control box close to the sound source.
- Clean up the sound picking hole on the control box.