tc electronic Cinders Overdrive User Guide
- June 7, 2024
- tc electronic
Table of Contents
TC ELECTRONIC
CINDERS OVERDRIVE
Tube-Like Overdrive with Extremely
Responsive and Expressive Feel
Quick Start Guide
Controls
-
Input/Output jacks – Connect a 1/4″ cable from your guitar to the INPUT jack, and connect a cable from the
OUTPUT jack to your amplifier. -
9 V DC – Connect a 9 V power supply (not included).
-
Footswitch – Turns the effect on and off. The LED will light when the pedal is engaged. The pedal operates in true bypass when disengaged.
-
Tone – Adjusts the amount of high-frequency contour for a brighter or rounder sound.
-
Volume – Adjusts the output level when the pedal is engaged.
-
Drive – Adjusts the amount of distortion.
Battery Replacement
Storage
Specification
Connectors
Input| 1/4″ TS, unbalanced
Impedance| >400 kΩ
Output| 1/4″ TS, unbalanced
Impedance| 1 kΩ
Power input| Standard 9 V DC, center negative, >100 mA
Battery option| Internal 9 V battery connector
Current consumption| <20 mA
Physical
Dimensions (H x W x D)| 58 x 74 x 132 mm (2.3 x 2.9 x 5.2″)
Weight| 0.5 kg (1.1 lbs)
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Tribe’s Limited Warranty, please see complete details online at musictri.be/warranty.
This product conforms with essential requirements of the EMC Directive
2014/30/EU, RoHS Directive 2011/65/EU, and WEEE Directive – 2012/19/EU.