Smartwatches Waterproof Smartwatch PRIME User Manual
- June 7, 2024
- Smartwatches
Table of Contents
Smartwatches Waterproof Smartwatch PRIME User Manual
Product is IP67 WATERPROOF
Operation Guide
Long press turn the watch ON/OFF.
Charging instruction: Charger pin can be placed at the back of the watch
to charge the watch.
APP download method
The watch can be connected to the app FunDo:
-
Android Phone: search and download “Fundo” app from Google Play;
IOS phone: search and download “Fundo” app from Apps Store; -
Scan the following QR code to Download “Fundo”.
Scan the QR code and Download “Fundo”APP.
Bluetooth connection
- Android Phone: Support operating system 4.4 and above;
- IOS phone: Support original operating system 7.0 and above;
☆ Pair with Android phone
- Turn on the smartphone Bluetooth, enter the ‘Fundo’ menu, select the option in the bottom right corner, enter ‘More’, Click ‘add device’, and click ‘Search’, It will automatically search for nearby enabled Bluetooth devices.
- Find the watch name and pair with it, after successful pairing, the Bluetooth icon in the watch drop-down menu will be green. On the smartwatch click bluetooth connect, Connectable 3.0, After successful pairing, the Bluetooth icon in the watch drop-down menu will be gradient blue green.
☆ Pair with IOS phone
- Turn on the smartphone Bluetooth, enter the ‘Fundo’ menu, select bottom right option, enter ‘More’, Click on ‘add device’, and click ‘Search’, It will automatically search for nearby enabled Bluetooth devices.
- Find the watch name and pair with it, After the successful pairing, the Bluetooth icon in the watch drop-down menu will be green, At this time, a Bluetooth device is displayed on the Bluetooth menu interface of the mobile phone.
- Click “Bluetooth Call” on the watch→‘Search for Bluetooth devices ’Find the phone name, match it, After successful pairing, In the Bluetooth menu interface of the mobile phone, two Bluetooth devices have been connected successfully.
- The Bluetooth icon in the watch drop-down menu will be gradient blue green,the watch and the phone can search each other for the device successfully, Through the watch – search for my device, there is vibration and ringing on the mobile phone Through the mobile phone – find the device, watch side will have a vibration.
How to setting notification:
Into phone’s Settings-App Management, find “Fundo”-permissions Management, turn on allow all. Into Notifications- find “Fundo”, Turn on allow all. Into “Fundo”- “Application push”, select allow all.
Main function introduction
Phone
Contacts: It can synchronize your mobile phone contacts
Dialer: Connect the mobile phone to use the Bluetooth call option.
Calllogs: It can synchronize the phone call record.
Information: Synchronize SMS content on mobile phone;
Notifier
Synchronize all the messages in the cellphone.
Sports
Sports mode: walking, running, mountaineering, cycling, basketball, badminton,
table tennis, football, settings, historical records.
Pedometer
Slide from bottom to top, after setting personal information. The pedometer
function is turned on by default, swing your arm normally during walking, the
pedometer will count your amount of steps and automatically calculates the
calories you have burned.
Sleep monitor
- Sleep is turned on automatically, sleep time from 21:00 to 9:00 in the morning
- After the Bluetooth connection between the watch and the mobile phone is successful, click Sync Data on the APK of the mobile phone to synchronize the sleep data on the watch.
Heart rate
The heart rate function will read your current heart rate by measuring it on
your wrist.
Blood pressure
Enter the blood pressure menu, wear the watch, click Start, the watch will
automatically measure the blood pressure value, and the measured blood
pressure will be synchronized to the APP.
Oxygen
Enter the blood oxygen menu, wear the watch, click start, the watch will
automatically measure the blood oxygen value, and the measured blood oxygen
will be synchronized to the APP.
ECG
Enter the ECG menu, wear the watch, click Start, the watch will automatically
measure the ECG value, and the measured ECG will be synchronized to the APP.
camera
You can use the smartwatch as an extension to take pictures on your phone.
BT music
Enter the music menu and click play to successfully play the music in the
phone.
Find Phone
Click “find phone”, connected phone will be ringing warning, after you find
the phone, tap “End” of the phone to stop the alarm, it works both watch and
Apps sides.
Sedentary
You can set the time period by yourself (at 30-minute intervals, minimum
0m←→300m maximum) when the sedentary time is reached, the watch will ring and
vibrate to remind you to get up.
Alarm
Customize the alarm time, number of rings, ringtones, and reminder types.
Stopwatch
Click the button in the lower left corner to start timing. In this interface,
click the button in the lower right corner to continue timing, click the
button in the lower left corner to pause timing, and slide the screen up and
down to view historical data; when the stopwatch is paused, click the button
in the lower right corner to clear data.
Calculator
Enter the calculator, works like a regular calculator.
Calendar
To view the current date, click the rose red round button to view the current
monthly calendar, and swipe the screen up and down to switch months.
Theme
You have 2 different themes.
BT Call
On the watch side, click Bluetooth search device, select the Bluetooth name of
the mobile phone that you want to pair with, click pair, and the phone end /
watch side click agree to pair successfully.
Setting
☆ BT Setting
When the Bluetooth connection between the watch and the mobile phone is not
successful, the Bluetooth can be turned on/off in the watch settings.
About
You can view the watch’s Bluetooth name, device address, Bluetooth address and
watch software version number.
Power saving
Turn on to enter power saving mode.
New notification
The watch synchronizes new messages from the paired mobile phone, the screen
will light up when you have a new message.
Weather
The watch synchronizes the weather.
Unit
You can switch watch metric and inch display.
Motion
Gesture wake-up system: when on, tilt the watch to turn off the screen, flat
watch on the screen, 90 degrees in front of yourself to light up the screen.
Swing menu page: Shake the watch menu to turn pages in the first level menu .
Interface
Shake to answer the call: shake the watch two or three times to answer the
call.
Sound
You can select the incoming call profile, select the ringtone, select the
notification ringtone; volume, adjust the volume of multimedia, ringtones,
notifications, etc.
Volume
Set the volume of multimedia, ringtones, notifications.
Display
Set screen brightness, backlight off time.
International
Turn off automatic synchronization, you can choose to set various languages
Turn on automatic synchronization, the watch side synchronizes with the
language
of the paired mobile phone.
Reset
Recovery the device.
QR Code
Download and install “Fundo” APP.
COPYRIGHT CULTURE GADGETS 2021
Read More About This Manual & Download PDF: