NAVITEL MSR900 Portable Video Recorder User Manual

: June 7, 2024
: NAVITEL

Table of Contents

NAVITEL MSR900 Portable Video Recorder User Manual
Introduction
Device layout
Buttons
Device functions
Installation
Precautions
Specifications
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NAVITEL MSR900 Portable Video Recorder User Manual

NAVITEL MSR900 Portable Video Recorder

NAVITEL MSR 900 Portable Video Recorder

Introduction

Dear Customer!

Thank you for purchasing this NAVITEL® product.
NAVITEL MSR900 DVR is a multifunctional high-definition digital video registrator (DVR) with many functions and features that are described in this User Manual. Please read the manual carefully before using the device and keep it for future reference.

Device layout

FIG 1 Device layout

LCD screen
Mode
LED Indicator light
Up
Power/OK
Down
Menu
Microphone
Mini-USB
LED lamp
Mount
microSD card slot
Reset
Speaker
Camera

Buttons

FIG 2 Buttons

Note: The built-in battery is designed only for recording an emergency event in parking mode and turning off the device correctly when the power is turned off. For the full operation of the device in any mode, a constant power connection is required.

NAVITEL s.r.o. hereby declares that the device NAVITEL MSR900 is compatible with the European directive EMC 2014/30/EU.

The full text of Declaration of conformity is available at the following internet address:
www.navitel.cz/en/declaration_of_conformity/msr900

Device functions

FIG 3 Device functions

FIG 4 Device functions

This function is available only in firmware version 20200528-V1.0 and higher.

Installation

Stop the car engine.
Put the microSD card into the DVR.
Note: use a high-speed card (Class 6 or above); capacity should be within 8-256 GB.
• To avoid malfunctions of the DVR and / or SD-card, don’t insert and remove SD-card during DVR operation.
• Before using a microSD card, please format it inside the DVR to avoid data errors. For formatting the SD-card in Menu mode select Format SD-card and confirm it.
Secure the device on the windshield with the bracket.
Connect the car charger to the cigarette lighter socket.
Connect the mini-USB interface to the car charger with the charger extension cord.
Note: charger extension cord can be placed along the edge of the windscreen.
Adjust the camera position; make sure the lens is facing parallel to the ground.
7. Start the engine; check whether the device is installed correctly.

Note: if the device is installed correctly, the indicator will glow red; the device will start up and begin recording (indicated by flashing blue light).

Precautions

Use only the original charger adapter. Using another adapter may negatively affect the device’s battery.
Do not use the device in humid or hot environment.
Keep the lens clean.
Do not disassemble the device and do not perform repairs by yourself.
Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 90% without condensation (25 °С).