HXSJ Streaming Ribbon Converter One-handed Keyboard Instructions

June 7, 2024
HXSJ

HXSJ Streaming Ribbon Converter One-handed Keyboard
Logo

GAME PLAYER EQUIPMENT
Instructions

HXSJ Streaming Ribbon Converter One-handed Keyboard
Cover

V500
Streaming ribbon converter
One-handed keyboard

Light effect mode:

The keyboard backlight function is controlled as follows:
Fn+F3= 8 kinds of backlight mode switching (red light blue light green light → purple light sky → blue light → yellow light → white light → rainbow light)
Fn+F4= Wave/Colorful Horse Race: Colorful color gradient running water, The default wave mode. Press again to enter the colorful cycling horse mode.
Fn+F5= Backlight off/on, cycle switch.
FN+5 = Adjust the streamer speed to become faster
FN+6 = Adjust the streamer speed to slow down

Two USB interface functions:
Connect the USB cable to the game console, press the logo, and connect the original handle with the mouse Connect to the corresponding USB interface

  1. The product converts the keyboard and mouse functions to the corresponding game platform for game operation
  2. The product must be connected to the original wired controller for wired guidance (except for the SWITCH host) in order to normally convert the keyboard and mouse to the corresponding game platform
  3. Supported platforms: PS3, PS4, XBOX 360, XBOX one, SWITCH
  4. The default two sets of key values, the mouse corresponds to the game platform function
  5. The direction of the mouse axis can be switched by pressing ESC+CAPSLOCK+A/S/D/F/G
  6. The mouse movement speed can be adjusted, and the speed of the axis can be adjusted as a whole through the ESC+R buttons.
  7. Support USB upgrade
  8. Product working voltage: DC 5V

Connection instructions

XBox-One Host keyboard and mouse connection diagram
HXSJ Streaming Ribbon Converter One-handed Keyboard Connection
instructions

LED corresponding mode

  • When the one-handed keyboard is not connected to peripherals, the right indicator light  will be red
  •  When the original handle and mouse peripherals are inserted, the left indicator light  shows green light

Instructions

  1. Set keyboard and mouse functions
    • Connect the keyboard to the game console, and insert the corresponding original wired controller into the designated interface of the device
  • Press ESC+SPACE on the keyboard at the same time to enter the mode of setting the keyboard and mouse button functions by yourself (the setting indicator lights up at this time).

  • Press and hold the function button of the original handle

  • Click the button on the keyboard or mouse to be set

  • Release the original wired handle button

  • At this time, the function of the button held down by the original handle is set to the pressed keyboard or mouse button. (Original handle buttons function normally and will not be affected by this setting)

  • After setting, press ESC+SPACE on the keyboard to save the current setting and exit the setting mode

  • For example press ESC+SPACE (space bar) to enter the setting mode, press and hold the A key of the original SWITCH handle, press the F key on the keyboard, and release the A key of the original SWITCH handle. At this time, press the F key on the keyboard, and it will appear The function of the handle A key. 3. Cancel the function set by keyboard and mouse
    note:

  • When setting the left and right joystick function of the original wired handle to the keyboard, the direction of the joystick must be pushed to the end, and only the four directions of the joystick are set up, down, left, and right

  • For the setting of the mouse, when the originally wired joystick must be pushed to the end, the mouse will slide in the corresponding direction and the mouse only supports the corresponding function of the left and right joystick directions.

  • The original handle cross keys support 8 directions setting

  • During the setting process, if you do not hold down the original wired handle function key or push the joystick to the end, the original set function of the keyboard or mouse will be cleared 4. Mouse speed adjustment
    Product support mouse Movement speed adjustment, the default is the third gear. DPI speed adjustment: ESC+CAPSLOCK+A/S/D/F/G (can be adjusted cyclically).

    1. Mouse Y axis direction switch
      The control of the Y-axis of some games is opposite to the setting value. The game operator can adjust the Y-axis direction of the mouse by pressing ECS+R according to their own needs.

    2. Description of function switching
      Enter setting mode: ESC+SPACE
      Exit setting mode: ESC+SPACE
      Mouse speed switch: ESC+CAPSLOCK+A/S/D/F/G
      Y axis plus reverse: ESC+R
      The key value is restored to the default: ECS+CTRL+ALT (long press for 3 seconds)

Default key-value table

keyboard Key| SWITCH| PS4| PS3| XBOX ONE| XBOX 360
---|---|---|---|---|---
W| Left stick up| Left stick up| Left stick up| Left stick up| Left stick up
A| Left stick left| Left stick left| Left stick left| Left stick left| Left stick left
S| Left stick down| Left stick down| Left stick down| Left stick down| Left stick down
D| Left stick right| Left stick right| Left stick right| Left stick right| Left stick right
WA| Left stick up left| Left stick up left| Left stick up left| Left stick up left| Left stick up left
WD| Left stick up right| Left stick up right| Left stick up right| Left stick up right| Left stick up right
SA| Left stick lower left| Left stick lower left| Left stick lower left| Left stick lower left| Left stick lower left
SD| Left stick lower right| Left stick lower right| Left stick lower right| Left stick lower right| Left stick lower right
SHIFT| L3| L3| L3| L3| L3
Q| Ll| Ll| Ll| Ll| Ll
E| R1| R1| R1| R1| R1
R| X| a| a| Y| Y
SPACE| B| x| x| A| A
F| Y| | | X| X
C| A| •| •| B| B
ESC| HOME| PS| PS| HOME(Cannot be set)| HOME
—| Camera Keys| Touchpad Keys| /| /| /
V| Camera Key| Touchpad Keys| /| /| /
TAB| BACK| Share| SELECT| View| BACK
CAPSLOCK| START| Option| START| Menu| START
Fl| Cross key on| Cross key on| Cross key on| Cross key on| Cross key on
1| Cross key left| Cross key left| Cross key left| Cross key left| Cross key left
2| Cross key down| Cross key down| Cross key down| Cross key down| Cross key down
3| Cross key right| Cross key right| Cross key right| Cross key right| Cross key right
UP| Cross key on| Cross key on| Cross key on| Cross key on| Cross key on
LEFT| Cross key left| Cross key left| Cross key left| Cross key left| Cross key left
DOWN| Cross key down| Cross key down| Cross key down| Cross key down| Cross key down
RIGHT| Cross key right| Cross key right| Cross key right| Cross key right| Cross key right

Mouse function

Note: The following buttons refer to the buttons on the mouse

Mouse Key SWITCH PS4 PS3 XBOX ONE XBOX 360
Left button R2 R2 R2 R2 R2
Right click L2 L2 L2 L2 L2
Slide up Right stick Right stick Right stick Right stick Right stick
Slide down Right stick Right stick Right stick Right stick Right stick
Swipe left Right stick left Right stick left Right stick left Right stick
left Right stick left
Swipe right Right stick right Right stick right Right stick right Right
stick right Right stick right

Slide upper
left 45°| Right stick and
upper left| Right stick and
upper left| Right stick and
upper left| Right stick and
upper left| Right stick and
upper left
Slide upper
right 45°| Right stick upper right| Right stick upper right| Right stick upper right| Right stick upper right| Right stick upper right
Slide bottom
left 45°| Right stick
lower left| Right stick
lower left| Right stick
lower left| Right stick
lower left| Right stick
lower left
Slide bottom
right 45°| Right stick bottom right| Right stick bottom right| Right stick bottom right| Right stick bottom right| Right stick bottom right
Middle mouse
button| R3| R3| R3| R3| R3

Product parameters:

Name: One-handed gaming keyboard Flash ROM: 32 bytes
Product model: V500 EEPROM: Built-in 2K bytes
Product interface: USB2.0 Operating voltage : VDD = 3.3V – 5.5V
Press the number of keys: 35 keys Working current 100mA
Key life: 20 million times Product size: 18263.8 cm
Product net weight 340g Ambient temperature: – 40° C – + 85° C
Product line length: 1.5m Programming temperature: 0° C – + 85° C

Support system: Win2000, Win XP, WinME, Vita, Win7/8, Android, Linux, Apple, and other operating systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals