NAVITEL R800 Portable Video Recorder User Manual

USER MANUAL

NAVITEL R800
Portable Video Recorder

NAVITEL R800

Introduction

Dear Customer!
Thank you for purchasing this NAVITEL® product.
NAVITEL R800 DVR is a multifunctional high-definition digital video registration (DVR) with many functions and features that are described in this User Manual. Please read the manual carefully before using the device and keep it for future reference.

Device layout

1. LCD screen
2. Mode
3. Indicator
4. Up
5. Power/OK
6. Down
7. Menu
8. Microphone
9.  Port mini-USB
10. LED lamp
11.  Mount port
12. microSD card slot
13. Reset
14. Speaker
15. Camera

Buttons

In Video Record mode, press to start recording; press again to stop.

In Capture mode, press to take a picture.

In Playback mode, press to select a file, or pause/unpause a video.

In the menu, press to select a menu item.

Menu| Press to access the Mode Settings menu. Press again to access the Setup menu.
Mode| Press to switch between Video Record, Capture, and Playback modes.
Up/Down| In the menu, press to highlight the next/previous menu item or file. In Video Record mode, press Down to protect the current recording. In Capture mode, press to zoom in or out.
Reset| If the device is not responding, press to reset.

Note : The built-in battery is designed only for recording an emergency event in parking mode and turning off the device correctly when the power is turned off. For the full operation of the device in any mode, a constant power connection is required.
NAVITEL s.r.o. hereby declares that the device NAVITEL R800 is compatible with the European directive EMC 2014/30/EU.
The full text of the Declaration of conformity is available at the following internet address: www.navitel.cz/en/declaration_of_conformity/r800

Device functions

Format SD-card| Formatting a microSD card in the DVR is necessary for the correct operation of the device. Before using a microSD card or in case of a data error, please format the microSD card. For formatting the SD-card in Menu mode select Format SD-card and confirm it.
---|---
Video| Connect the device to an external power supply and it will start recording automatically (indicated by the flashing blue light). Press the OK button to stop recording (the blue light will become steady). Press OK again to record another video. Each video will be saved automatically.
Photo| In Video Record mode, press the Mode button to enter a Capture mode, press the OK button to take a photo (it will be saved automatically).
Playback| In Video Record mode, press the Mode button twice to enter Playback mode; press the Up and Down buttons to select a file; press the OK button to play a file. During playback, press OK to pause/unpause.
Lock file| In Video Record mode, press Down to protect the current recording. A key symbol will appear at the bottom of the screen. In Playback mode, select a file, press Menu, and select Protect, then Lock Current or Lock All. Protected files cannot be deleted or overwritten. Select Unlock Current / Unlock All to remove protection.
Record audio| Record video with or without sound.
Loop recording| This feature allows you to save a video as a set of files given in the duration menu. If the memory card runs out of space, the unprotected files will be overwritten in the order in which they were created.
WDR| Wide Dynamic Range provides a more dynamic range and detailed image. Disabled by default.
---|---
G-sensor| If the vehicle is hit by something, the DVR will automatically lock the current video.
LED lamp| Turn on when it’s dark to improve image brightness.
Parking monitor| In the shutdown state, if the vibration is detected, the device will turn on automatically and start recording. The file will be protected (locked). If nothing happens for over a minute, the device will shut down.
Plate number| Enter a plate number to be added to video recordings. Press Up and Down to select a   character, OK to enter it, Mode to switch between types of characters (letters, numbers, etc). Disabled by default.
Battery| The red indicator lights up when the device is plugged into an external power supply; as the battery is charging, the red will gradually dim; the red light going out means the battery is full.
Screen Saver| The device can automatically shut off the screen to reduce power consumption; time the interval can be set in the Screen Saver menu.
USB- connection*| When connecting the device to a PC using a USB cable, two connection options will appear:

1. Mass Storage: play, copy and delete files.
2. Record: standard mode.

• This function is available only in firmware version 20200528-V1.0 and higher.

Installation

1. Put the microSD card into the DVR.
   Note: use a high-speed card (Class 6 or above); capacity should be within 8-256 GB.
   • To avoid malfunctions of the DVR and/or SD-card, don’t insert and remove SD- card during DVR operation.
   • Before using a microSD card, please format it inside the DVR to avoid data errors. For formatting the SD-carin Menu mode select Format SD-card and confirm it.

2. Secure the device on the windshield with the bracket.

3. Connect the car charger to the cigarette lighter socket.

4. Connect the mini-USB interface to the car charger with the charger extension cord.
   Note: charger extension cord can be placed along the edge of the windscreen.

5. Adjust the camera position; make sure the lens is facing parallel to the ground.

6. Turn the power on; check whether the device is installed correctly.
   Note: if the device is installed correctly, the indicator will glow red; the device will start up and begin recording
   (indicated by flashing blue light).

Precautions

1. Use only the original charger adapter. Using another adapter may negatively affect the device’s battery.
2. Do not use the device in humid or hot environments.
3. Keep the lens clean.
4. Do not disassemble the device and do not perform repairs by yourself.
5. Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
6. Permissible ambient temperature in operating mode: 0 to +35 °С. Storage temperature: +5 to +45 °С. Relative humidity: 5% to 90% without condensation (25 °С).

Specifications

Rechargeable battery
Working current| 700 mA
Microphone/speaker| Supported
Language| Czech, English, French,
German, Hungarian,
Polish, Russian,
Slovak, Spanish

Note: the specifications may change due to upgrades.

References

• NAVITEL Prohlášení o Shodě
• NAVITEL Declaration of Conformity
• NAVITEL Deklaracja Zgodności
• NAVITEL Prehlásenie o Zhode
• NAVITEL detailed offline maps for iPhone, iPad, Android

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>