XIAOKOA 2.4G Wireless Microphone User Manual

June 7, 2024
XIAOKOA

XIAOKOA logo

2.4G Wireless Microphone
User Manual
(N-80 Headset)

Read the instruction carefully before you use it

Features

The wireless microphone uses 2.4g technology, which features signal stability, plug and play, long distance amplification etc. It is compatible with a variety of loudspeakers, amplifier equipment, outdoor audio equipment, etc.

Product Overview

Product Overview 1

Product Overview 2How to set up on amplifier

Headset and receiver connection method

How to set up on amplifier 1

(1) Turn on the transmitter, the blue light will flashing.

How to set up on amplifier 2

(2) Turn on the receiver, After the blue light stops flashing, successfully paired.

How to set up on amplifier 3 How to set up on amplifier 4

                                                                       Mic-in jack for 6.35mm

(3) Insert the receiver into the MIC port of amplifier. when used on a PA device with 6.35mm, first plug the receiver into the 6.35 converter and then plug it into Mic-in jack on the PA device.

How to dissemble

How to dissemble 1

Step 1

How to dissemble 2

Step 2: Use 2 thumb to press down the Headset holder at the same time.

How to dissemble 3

Step 3: After remove it, the headphone will separate out.

How to dissemble 4

Step 4: When want to assemble, there will be a joint and allign it by using 2 thumb to push it up.

Product Parameler

Model: N-80 Sampling Frequency: 16KS/s
Input Voltage Range: DC3.5V-5.5V Modulation Method: GFSK
Maximum Current: ≤40mA The speaker size: 3 inch
Battery Type: Built-in 400mah RF Transmission Power: 10dBm
Charging Time: <4hours Transmission Distance: 40m
Working Time: ≥10hours RX Sensitivity: -88dBm
Frequency Band: 2400-2483Mhz S/N Ratio: ≥65dB

Question & Answer

1. Why does the microphone whistle when working?
Keep the microphone away from loudspeaker, and do not block the transmitter and receiver.

2. Why can’t the microphone be connected to the loudspeaker?
Make sure the power of the receiver and transmitter is sufficient, and the pairing is successful.

3. How long does the microphone charge and work?
Fully charged for 2-3 hours, it can usually be used for about 4-5 hours. When the blue light flashes rapidly during use, it indicates that the battery is low. please charge immediately.

Introduction

Thank you for purchasing this wireless microphone, please read this user manual carefully.

Tips

The product must be set up on windows first and secondly turning on the recording software.

Specification

Sampling Frequency 16KS/s
Modulation Method GFSK
The Speaker size 3 inch
RF Transmission power 10dbm
Transmission Distance 40m
RX Sensitivity -88dbm
S/N Ratio ≥65db

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals