FANATEC CSL Pedals User Guide
- June 7, 2024
- FANATEC
Table of Contents
FANATEC CSL Pedals
PACKAGE CONTENTS
A. 1x CSL Pedals (2x Edge Protector 1.5 mm pre-installed)
B. 2x Hard Mount Spacer
C. 2x Edge Protector 2.5 mm (Adhesive Included)
D. 8x M4x12 mm Countersunk Mounting Bolts
E. 1x RJ12 Cable
F. 1x T20 Torx Key
For compatibility information, visit the product page on Fanatec.com.
PEDAL ADJUSTMENT
Use either the pre-installed 1.5 mm or 2.5 mm edge protectors (C) (including adhesive) when using the pedals on a floor.
HARD-MOUNTING
-
Hard-mount using all four mounting holes (bolts are not included).
Download drilling template from the product page on Fanatec.com. -
M6x(22+X) mm
CONNECTIONS
- Connect the brake pedal lever unit cable to the “Brake” port.
- CSL Pedals Clutch Kit (Sold Separately).
- Port only for Wheel Base or CSL Pedals Load Cell Kit.
ATTENTION: Connecting any other pedal or peripheral to this port may cause permanent damage!
ATTENTION
Update your wheel base firmware. You can obtain the latest driver from fanatec.com/downloads. Follow the instructions provided by the Driver & Firmware Instruction Manual which can be found on the product page.
NOTE: In order to update the firmware of this product, a PC is mandatory and PC mode must be active on the wheel base.
References
- Fanatec USA | Fanatec
- app | Fanatec
- Fanatec
- CSL Pedals Unboxing & Video Guide - YouTube
- Support / FAQ | Fanatec
- Fanatec USA | Fanatec
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>