soundcore Icon Mini Bluetooth Speaker User Manual
- June 7, 2024
- Soundcore
Table of Contents
Soundcore Icon Mini
User Manual
Model No.: A3121
51005001393 V01
Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Soundcore Icon Mini can be immersed in water up to 1m for up to 30 minutes.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Do not use any corrosive cleaner/oil to clean.
What’s Included
At a Glance
- Power Button
- Volume – Button
- Multi-function Button
- Volume + Button
- Bluetooth Button
- Status Indicator
- Micro USB Port
- 3.5mm Audio Input Port
Using Your Soundcore Icon Mini
Turn On / Off
| ON | Press |
|---|---|
| OFF | Press and hold for more than 2 seconds |
a. Bluetooth mode
| Rapidly Flashing Blue Solid Blue| Bluetooth Pairing Mode
---|---|---
| Slow Flashing Blue| Connected to a device
| Rapidly Flashing Blue Solid Blue|
Idle mode
Note: The speaker enters idle mode when the connection is taking too long or
it’s disconnected for more than 3 mins. Press the Bluetooth button to re-enter
Bluetooth pairing mode.
| |
Enter True Wireless Stereo Group Mode / Disconnect True Wireless Stereo
---|---|---
| Double Flashing
Blue| True Wireless Stereo Group Mode
| Solid Blue|
Connected to True Wireless Stereo
Note: When the True Wireless Stereo group is successful, the LED indicator on
the first speaker will flash in blue, the LED indicator on the second speaker
will be solid blue.
With True Wireless Stereo technology, you can pair your Soundcore Icon Mini with another Soundcore Icon Mini to explore the best sound effects with left and right sound channels separated on both speakers.
| Play / Pause
---|---
| Play Next Song
| Play Previous Song
| Answer Call / End Call
| Reject Call / Switch between a call on hold and an active call
| End current call and answer incoming call / End current call and switch to
call on hold
| Switch audio source between Speaker and Phone
| Activate Siri / Other Voice Control Software
| Volume Up / Down
| Solid Blue| On a Call
---|---|---
| Flashing Blue| Incoming Call
When turned on, Soundcore Icon Mini will automatically connect to the last
connected device if available. If not, press the Bluetooth button to activate
pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing
mode. Then repeat the pairing steps.
Having connection problems? Remove Soundcore Icon Mini from your device’s
Bluetooth history and ensure it’s less than 3 feet away.
Then try pairing again. To get the best sound quality, make sure there is a
clear line of sight between the connected device and your speaker.
b. AUX-In mode
- sounding AUX cable sold separately.
Plugging in an audio cable will automatically switch to AUX mode.
When using AUX mode, control audio playback via the connected device.
True Wireless Stereo mode cannot be used in AUX mode.
Charging your Soundcore Icon Mini
| Slow Flashing Red| Low Battery
---|---|---
| Solid Red| Charging
| | Fully Charged
Use the included USB cable to charge your Soundcore Icon Mini and make sure it
is fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge
your speaker for extended periods.
When not in use, store your speaker in a cool place.
Specifications
Specifications are subject to change without notice.
Input: 5 V 1 A
Audio output: 3 W
Battery capacity: max. 900 mAh
Charging time: 3 hours
Playtime (varies by volume level and music content): 8 hours
Size: 95 x 76 x 36 mm / 3.7 x 2.9 x 1.4 inch
Weight (without packaging): 215 g / 7.6 oz
Bluetooth version: V4.2
Bluetooth range: 30m/99ft
Customer Service
24-month limited warranty
Lifetime technical support
+1 (800) 988 7973 (US)
For FAQs and more information, please visit:
@SoundcoreAudio
@soundcoreaudio
@soundcoreaudio