VIRGINIA 5’’ Digital Wireless Backup Camera Kit User Manual
- June 7, 2024
- VIRGINIA
Table of Contents
**USER MANUAL**
5’’ Digital Wireless Backup Camera Kit
Feature:
- 2.4G Digital wireless technology, no interference and easy installation.
- High brightness lcd display with built-in wireless receiver.
- Wireless transmitter can work with any analog backup camera or CCTV surveillance camera4. 120 ms time delay only, quick response time like wired backup camera system.
- Working Frequency: 2400~ 2480MHz.
- Image up/down/,normal/mirror flip function.
- IP68 Waterproof HD Color CMOS sensor backup camera
- Monitor working voltage: DC10V-26V, wireless transmitter working voltage: DC10-26V, camera working voltage: DC12V
Monitor Specifications:
| Screen Size: | 5 inch |
|---|---|
| Display Screen: | FT LCD |
| Resolution: | 480(RGB)272 |
| Brightness: | 400cd/m2 |
| Contrast: | 300:01:00 |
| onsumption: | ≤2W |
| Power Supply: | DC10V-26V |
Camera Specification:
- Image Sensor: HD 1/4 Color CMOS
- Horizontal Resolution: 420 TVL
- Pixels:648*488
- View Angle: 170°
- Working Voltage: DC12V
- Waterproof Rate: IP68
Brief Introduction:
**Notice:***
1.The system were paired already, no need to press the button on the
transmitter before using it.
2.How to piar?—Enter the monitor’s pairing mode, hold pressing the button on
the transmitter to start the connection. After success is connected, the link
indicator will turn green constantly.
INSTALLATION:
- Install the monitor at the proper position.
- Plug the car charger into the cigarette lighter to power the display, then turn it on.
- Connect the wire as shown in the attached image.
- Connect the red wire to the positive pole of the reversing light and the black one to the negative pole.
- Remove the license plate and then install the license plate camera together with the license plate. At this point, the installation is complete, when you reversing, the camera will automatically start working, you only need to power on the monitor.
PAIR
(System default camera and monitor is being paired packing,you just need have them power and it works.)
LCD SETTING
MIRROR MODE
Press the “M” button to enter menu,Press“-”or“+”scroll to “MIRROR MODE”,long press “M”button.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>