milwaukee 2951-20 M12 Radio Charger User Manual
- June 12, 2024
- Milwaukee
Table of Contents
2951-20 M12 Radio Charger
User Manual
OPERATOR’S MANUAL
Cat. No. / No de cat. 2951-20
M12™ RADIO + CHARGER
2951-20 M12 Radio Charger
WARNING To reduce the risk of injury, user must read and understand operator’s manual.
IMPORTANT SAFETY INSTRUCTIONS
RADIO SAFETY
WARNING
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers that produce heat.)
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, has been dropped, or is missing battery doors.
-
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place open flames or candles near or on the radio.
-
Only plug power supply into readily accessible outlet to allow the appliance to be unplugged quickly.
-
Only operate this apparatus in a well-ventilatedarea.
-
A battery operated radio with integral batteries oar separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
-
Use battery operated radio only with specifically designated battery packs. Use of any other batteries may create a risk of fire.
-
When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metaobjects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
-
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.
-
Do not use any adaptor plugs.
-
When operating a radio outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.
-
Never disassemble the radio or try to do any rewiring on the radio’s electrical system.
-
Do not expose this apparatus to dripping and splashing, or place objects filled with liquids on this unit.
-
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
-
This radio + charger is designed to be powered by a standard 120 volt AC line or AC generator. The radio can also be powered using a MILWAUKEE M12™ Li-Ion battery pack. Radio + charger must be plugged into an appropriate receptacle. Do not attempt to use with any other voltage or power supply.
CHARGER SAFETY -
SAVE THESE INSTRUCTIONS – THIS OPERATOR’S MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR MILWAUKEE LI-ION M12™ RADIO + CHARGER.
-
BEFORE USING, READ THIS OPERATOR’S MANUAL, YOUR BATTERY PACK OPERATOR’S MANUAL, AND ALL LABELS ON THE BATTERY PACK AND RADIO + CHARGER.
-
CAUTION – TO REDUCE THE RISK OF INJURY, CHARGE MILWAUKEE LI-ION PACKS ONLY IN THEIR MILWAUKEE LI-ION CHARGER. Other types of chargers may cause personal injury or damage. Battery pack and charger are not compatible with V™-technology or NiCad systems. Do not wire a battery pack to a power supply plug or car cigarette lighter. Battery packs will be permanently disabled or damaged.
-
AVOID DANGEROUS ENVIRONMENTS. Do not charge battery pack in rain, snow, damp or wet locations. Do not use battery pack or charger in the presence of explosive atmospheres (gaseous fumes, dust or flammable materials) because sparks may be generated when inserting or removing battery pack, possibly causing fire.
-
CHARGE IN A WELL VENTILATED AREA. Do not block charger vents. Keep them clear to allow proper ventilation. Do not allow smoking or open flames near a charging battery pack. Vented gases may explode.
-
MAINTAIN CHARGER CORD. When unplugging charger, pull plug rather than cord to reduce the risk of damage to the electrical plug and cord. Never carry charger by its cord. Keep cord from heat, oil and sharp edges. Make sure cord will not be stepped on, tripped over or subjected to damage or stress. Do not use charger with damaged cord or plug. Have a damaged charger replaced immediately.
-
DO NOT SHORT CIRCUIT. A short circuited battery pack may cause fire, personal injury, and product damage. A battery pack will short circuit if a metal object makes a connection between the positive and negative contacts on the battery pack. Do not place a battery pack near anything that may cause a short circuit, such as coins, keys or nails in your pocket.
-
DO NOT ALLOW FLUIDS TO FLOW INTO BATTERY PACK. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.
-
DO NOT USE AN EXTENSION CORD UNLESS IT IS ABSOLUTELY NECESSARY. Using the wrong, damaged or improperly wired extension cord could result in the risk of fire and electrical shock. If an extension cord must be used, plug the charger into a properly wired 16 gauge or larger extension cord with pins that are the same number, size and shape as the pins on the charger. Make sure that the extension cord is in good electrical condition.
-
USE ONLY RECOMMENDED ATTACHMENTS. Use of an attachment not recommended or sold by the battery charger or battery pack manufacturer may result in a risk of fire, electric shock or personal injury.
-
UNPLUG CHARGER when not in use. Remove battery packs from unplugged chargers.
-
TO REDUCE THE RISK OF ELECTRIC SHOCK, always unplug charger before cleaning or maintenance. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards.
-
STORE YOUR BATTERY PACK AND CHARGER in a cool, dry place. Do not store battery pack where temperatures may exceed 120°F (50°C) such as in direct sunlight, a vehicle or metal building during the summer.
Federal Communications Commission
WARNING Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
EXTENSION CORDS
Double insulated tools can use either a two or three wire extension cord.
As the distance from the supply outlet increases, you must use a heavier gauge
extension cord. Using extension cords with inadequately sized wire causes a
serious drop in voltage, resulting in loss of power and possible tool damage.
Refer to the table shown to determine the required minimum wire size.
The smaller the gauge number of the wire, the greater the capacity of the
cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge
cord. When using more than one extension cord to make up the total length, be
sure each cord contains at least the minimum wire size required. If you are
using one extension cord for more than one tool, add the nameplate amperes and
use the sum to determine the required minimum wire size.
Guidelines for Using Extension Cords
- If you are using an extension cord outdoors, be sure it is marked with the suffix “W-A” (“W” in Canada) to indicate that it is acceptable for outdoor use.
- Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it.
- Protect your extension cords from sharp objects, excessive heat and damp or wet areas.
- Unplug all cords during lightning storms or when unused for long periods of time.
Recommended Minimum Wire Gauge
**For Extension Cords***
Nameplate Amps|
Extension Cord Length
25′| 50′| 75′| 100′| 150′
0 – 2.0| 18| 18| 18| 18| 16
2.1 – 3.4| 18| 18| 18| 16| 14
3.5 – 5.0| 18| 18| 16| 14| 12
5.1 – 7.0| 18| 16| 14| 12| 12
7.1 – 12.0| 16| 14| 12| 10|
12.1 – 16.0| 14| 12| 10| |
16.1 – 20.0| 12| 10| | |
- Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO
USER-SERVICABLE PARTS INSIDE. REFER SERVICIING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
****The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
GROUNDING
Double Insulated Radios:
Radios with Two Prong Plugs
Radios marked “Double Insulated” do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian
Standard Association and the National Electrical Code. Double Insulated radios
may be used in either of the 120 volt outlets shown in Figures A and B.
SYMBOLOGY
| Volts
---|---
| Direct Current
| Alternating Current
| Amps
| Hertz
| Presence of important operating instructions.
| Risk of electric shock.
| Federal Communications Commission
|
UL Environment Energy Efficiency Certification Mark for Canada
| UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. …………………………………………….. 2951-20
Input AC Volts ……………………………………….120 AC
Input AC Amps ………………………………………….1.2 A
Input DC Volts ………………………………………. 14 DC
Input DC Amps ……………………………………………3 A
Output Volts ………………………………………….. 12 DC
Output Amps ……………………………………………….1 A
Battery Type ………………………………………….M12™
Charger Type…………………………………………M12™
Recommended Operating Temperature *
Battery and Charger .. 40°F to 104°F (5°C to 40°C)
Battery and Tool ….. 14°F to 104°F (-10°C to 40°C)
FUNCTIONAL DESCRIPTION
1. PRESET button
2. Bluetooth button
3. AM / FM button
4. CLOCK button
5. On / Off button
6. Volume down button
7. Volume up button
8. Seek buttons| 9. Antenna
10. Battery bay
11. USB / 12vDC compartment
12. Handle
13. Charger indicators*
14. Display
15. Tweeter
16. Full range speaker
---|---
- Charger Indicators When a battery pack is inserted into the charger, the LEDs will indicate the following:
| Continuous red: Charging
---|---
| Continuous green light: Charging is complete
| Flashing red: Battery is too hot/cold Charging will begin when battery
reaches correct charging temperature
| Flashing red/green: Damaged or faulty battery pack
RADIO ASSEMBLY
WARNING
Recharge only with the charger specified for the battery. For specific
charging instructions, read the operator’s manual supplied with your charger
and battery.
Power
The MILWAUKEE M12 ™ Radio + Charger can be powered by MILWAUKEE M12™ Li-Ion
battery packs or a standard wall outlet. When plugged into a wall outlet, the
battery bay will charge MILWAUKEE M12™ Li-Ion battery packs (see Charger
Operation).
Inserting/Removing Battery Pack
- To insert the battery pack, slide it into the battery bay.
- To remove the battery pack, pull the battery pack off of the bay.
Low Battery Indicator
When the radio is powered by a battery pack and its charge falls below 10%,
the low battery indicator is displayed.
Battery Pack Protection
To protect the life of the battery pack, the radio will shut off when the
battery’s charge becomes too low. If this happens, plug Radio + Charger into a
120V outlet and charge the battery pack according to Charger Operation.
USB Power Outlet
This outlet can be used to charge a cell phone, power an MP3 player or any
other device that uses less than 2.1 A of DC electrical current.
NOTE: Any device that uses more than 2.1 A of DC electrical current will
trip a self-resetting overload and disable the output.
RADIO OPERATION
WARNING
Always remove battery pack before changing or removing accessories. Only use
accessories specifically recommended for this radio. Others may be hazardous.
To reduce the risk of fire or electric shock, do not expose this radio to rain
or moisture.
Turning On/Off and Controlling Volume
Plug the cord into an appropriate AC outlet or install a battery pack.
Press and hold the On/Off button until the radio turns ON or OFF. The radio
station (frequency) is displayed. To display the time, press the CLOCK
button. Volume is restored to the last setting.
NOTE: When the Radio + Charger is running on battery power, the display
will dim after 5 minutes to reduce power use.
Use the Volume up and down buttons to increase or decrease the volume.
Setting the Clock
- Press and hold the CLOCK button until the hour begins to flash.
- Use the ◄ and ► buttons to change the hour.
- Press the CLOCK button again. The minutes will begin to flash. Use the ◄ and ► buttons to change the minutes.
- Press the CLOCK button again to save.
EQ Adjustment
Press and hold the AM/FM button to enter tuning mode. Use the ◄ and ► buttons
or and buttons to adjust Treble, and then Bass.
Selecting Band
Push the AM/FM button to select AM or FM
Tuning and Seeking
Press the ◄ and ► buttons to move up and down the band. Press, hold, and
release the ◄ and ► buttons to SEEK through the band. When a station is found,
the SEEK will stop.
PRESET Stations
To set the PRESET stations:
- Tune to desired station.
- Press and hold the PRESET button until the PRESET indicator on the display begins to flash.
- Use the ◄ and ► buttons to select the PRESET location for the station. Five locations (1-5) are available for both AM and FM.
- Press the PRESET button to save the location.
To tune to a PRESET station:
Press and release the PRESET button to step through the PRESET stations.
Using Bluetooth
To enter the Bluetooth mode, press the button.
Pairing
- If no Bluetooth device is connected, Bluetooth pairing will begin automatically and the icon will flash on the display.
- The radio will continue to search for a signal for 3 minutes.
- While the is flashing, select “M12 Radio + Charger” on the Bluetooth capable device.
- Once the device has successfully paired with the radio, the will be shown on the radio’s display.
Connecting
To enter the Bluetooth mode, press the button.
When the radio locates a paired Bluetooth device, the will stop flashing.
If connection is lost between the radio and the Bluetooth device, the radio
will try to reconnect automatically for up to 3 minutes.
Controlling
When streaming music through to the radio via a Bluetooth device, use the
button. Use the ◄ and ► to move through the tracks.
CHARGER OPERATION
WARNING
Charge only MILWAUKEE M12™ Lithium-Ion battery packs in the MILWAUKEE Li-Ion
Battery Charger. Other types of batteries may cause personal injury and
damage. Battery pack and charger are not compatible with V™-technology or
NiCad systems. When to Charge MILWAUKEE Li-Ion Battery Packs
Remove the battery pack from the tool for charging when convenient for you and
your job. MILWAUKEE batteries do not develop a “memory” when charged after
only a partial discharge. It is not necessary to run down the battery pack
before placing it on the charger.
- Use the Fuel Gauge to determine when to charge your MILWAUKEE Li-Ion battery pack.
- You can “Top-Off” your battery pack’s charge before starting a big job or long day of use.
How to Charge the Battery Pack
Plug the Radio + Charger into a 120V outlet. The battery pack will not charge
if the Radio + Charger is not plugged in. Place the battery pack into the bay.
- A fully discharged battery pack with an internal temperature in the normal range will charge in about 30 to 185 minutes, depending on the battery pack.
- Heavily cycled batteries may take longer to charge completely.
- After charging is complete, the continuous green light will turn on.
- The charger will keep the battery pack fully charged if it is left on the charger.
- If the light indicator flashes red and green, check that the battery pack is fully seated into the bay. Remove the pack and reinsert. If the problem persists, contact a MILWAUKEE service facility.
- If the light indicator does not come on, check that the battery pack is fully seated into the bay. Remove the pack and reinsert. If the light indicator still does not come on, contact a MILWAUKEE service facility.
Charging a Hot or Cold Battery Pack
The Red Flashing Indicator light on the charger indicates that the battery
pack temperature is outside the charging range. Once the battery pack is
within the acceptable range, normal charging will take placeand the red light
will be continuous. Hot or cold batteries may take longer to charge.
Li-Ion Charging Status
Battery Pack Temperature| Red Charger Indicator Light| Charging
Status
Too Hot
Normal Range Too Cold| Fast Flashing Continuous Fast Flashing| Not charging
Normal charging Not charging
MAINTENANCE
WARNING
To reduce the risk of injury, always unplug the charger and remove the battery
pack from the charger or tool before performing any maintenance. Never
disassemble the tool, battery pack or charger. Contact a MILWAUKEE service
facility for ALL repairs.
Maintenance and Storage
Store your charger in a cool, dry place.
As a general practice, it is best to unplug battery chargers and remove
battery packs when not in use. No battery pack damage will occur, however, if
the charger and battery pack are left plugged in.
Changing Back-up Batteries
WARNING Batteries may leak chemicals or may explode if used incorrectly.
The following care should be taken to prevent such an incident:
- Make sure the positive (+) and negative (-) battery terminals are positioned correctly.
- Do not mix new and old batteries together, or mix different types of batteries.
- Do not try to recharge non-rechargeable batteries.
If chemicals from the batteries come in contact with your skin, wash them off
immediately with water. If chemicals leak onto the radio, clean the radio
completely.
Choking hazard. Keep batteries away from children.
To hold station presets and clock time when the battery pack is removed and
the radio is unplugged, (2) AAA batteries are required.
- Remove battery pack and unplug radio.
- Remove the screw and battery cover located near the battery bay.
- Insert two (2) AAA batteries according to matching positive (+) and negative (-) marks.
- Replace the battery cover and screw.
- Always dispose of used batteries properly.
WARNING To reduce the risk of fire, personal injury, and product damage
due to a short circuit, never immerse your tool, battery pack or charger in
fluid or allow a fluid to flow inside them. Corrosive or conductive fluids,
such as seawater, certain industrial chemicals, and bleach or bleach
containing products, etc., can cause a short circuit.
Cleaning
Clean out dust and debris from charger vents and electrical contacts by
blowing with compressed air. Use only mild soap and a damp cloth to clean the
battery pack and charger, keeping away from all elec- trical contacts. Certain
cleaning agents and solvents are harmful to plastics and other insulated
parts. Some of these include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents, ammonia and household detergents
containing ammonia. Never use flammable or combustible solvents around battery
packs, charger, or tools.
Repairs
For repairs, return the tool, battery pack and charger to the nearest
authorized service center.
ACCESSORIES
WARNING
Use only recommended accessories. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a
distributor.
SERVICE – UNITED STATES
1-800-SAWDUST (1.800.729.3878)
Monday-Friday, 7:00 AM – 6:30 PM CST or visit
www.milwaukeetool.com
Contact Corporate After Sales Service Technical Support with technical,
service/repair, or warranty questions.
Email:
metproductsupport@milwaukeetool.com
Become a Heavy Duty Club Member at
www.milwaukeetool.com to receive important
notifications regarding your tool purchases.
SERVICE – CANADA
Milwaukee Tool (Canada) Ltd
1.877.948.2360
Monday-Friday, 7:00 AM – 4:30 PM CST or visit
www.milwaukeetool.ca
LIMITED WARRANTY USA & CANADA
This MILWAUKEE power tool is warranted to the original purchaser from an
authorized MILWAUKEE distributor only to be free from defects in material and
workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace
any part on this power tool which, after examination, is determined by
MILWAUKEE to be defective in material or workmanship for a period of one (1)
year after the date of purchase unless otherwise noted. Return of the power
tool to a MILWAUKEE factory Service Center location or MILWAUKEE Authorized
Service Station, freight prepaid and insured, is required. A copy of the proof
of purchase should be included with the return product. This warranty does not
apply to damage that MILWAUKEE determines to be from repairs made or attempted
by anyone other than MILWAUKEE authorized personnel, misuse, alterations,
abuse, normal wear and tear, lack of maintenance, or accidents. Normal Wear:
Many power tools need periodic parts replacement and service to achieve best
performance. This warranty does not cover repair when normal use has exhausted
the life of a part including, but not limited to, chucks, brushes, cords, saw
shoes, blade clamps, O-rings, seals, bumpers, driver blades, pistons,
strikers, lifters, and bumper cover washers.
This warranty does not cover battery packs or all power tools. Refer to the separate and distinct warranties available for those products. The warranty period for the LED in the LED Work Light (49-24-0171) and the LED Upgrade Bulb (49-81-0090) is the lifetime of the product subject to the limitations above. If during normal use the LED or LED Upgrade Bulb fails, the part will be replaced free of charge.
Warranty Registration is not necessary to obtain the applicable warranty on a
MILWAUKEE power tool product. The manufacturing date of the product will be
used to determine the warranty period if no proof of purchase is provided at
the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN
IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF
YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO
EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR
PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS
ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY
PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR
ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH
DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE
DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only. Please
consult the ‘Service Center Search’ in the Parts & Service section of
MILWAUKEE’s website www.milwaukeetool.com or
call 1.800. SAWDUST (1.800.729.3878) to locate your nearest service facility
for warranty and non-warranty service on a MILWAUKEE power tool.
MILWAUKEE TOOL
13135 West Lisbon Road
Brookfield, WI 53005 USA
58142951d3
01612820101Q-01(A)
Printed in China
Documents / Resources
|
milwaukee 2951-20 M12 Radio
Charger
[pdf] User Manual
2951-20 M12 Radio Charger, 2951-20, M12 Radio Charger, Radio Charger, Charger
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>