Luft sunRADON User Manual
- June 7, 2024
- Luft
Table of Contents
Luft sunRADON User Manual
Plug In
Plug the Luft into a wall AC outlet.
- Keep the Lüft upright as shown above. The AC plug prongs can be rotated 90 degrees.
- Choose a location that is draft-free (away from direct air such as air conditioning vents), and where the Lüft can remain plugged-in and undisturbed. Tip: Replace an existing nightlight with the Lüft.
LED
The front panel displays one of the following default colors:
- Yellow–warning
- Red–alert
- Green–ok
- Blue–nightlight
The LED colors, warning/alert thresholds, and nightlight start and stop times are configurable in the Lüft app for each Lüft.
Warm Up
After the Lüft is plugged in and the monitor has completed its self-test, the LED may display yellow or red until initial stabilization is complete.
- 30 minutes: Initial indoor air quality (IAQ) readings (eCO2, tVOC, Temperature, Pressure, and Humidity) are available.
- 90 minutes: First radon sensor readings are available and all six sensors start reporting hourly.
After the first plug in, the Lüft will self-calibrate in the first three hours and then continue to optimize over the next 7 days.
Download App
Download the Lüft app from the app store of choice, or scan this QR code to open the app page.
Start App and Connect
- Verify that your Wi-Fi router supports 2.4 GHz. Note the router name and password.
- Enable Bluetooth on your mobile device. iPhone only: connect your iPhone to the Wi-Fi network to which you will connect the Lüft in Step 4.
- Start the Lüft app and create an account (username and password).
- Follow the step-by-step on-screen setup guide.
- When asked to select the device, locate the 4-digit Bluetooth identifier (BT-ID) on the packaging or product label.
- Assign a device name.
- Click Connect to Wi-Fi.
The Lüft app opens and the IAQ sensor readings are updated, when available. A status icon appears in the connected devices pane. The icon color indicates device status (same colors as front LED).
Updated sensor readings are available every six minutes. Press Refresh to load recent sensor readings, if desired.
SunRADON Support
Visit the SunRADON Support website for additional information: https://sunradon.com/resources-support
SunRADON
425-B Pineda Ct.
Melbourne, FL 32940
USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>