mojawa MOJO2 Bone Conduction Headphones User Guide
- June 4, 2024
- mojawa
Table of Contents
MOJO2
MOJAWA Bone Conduction Headphones
User Guide
Product Composition
How to Wear
Identify the Left and Right of the headset by the volume Control touchpad and LED indicator. They should be on the Right Side. Wear the headset by wrapping it around your head and letting it rest on your ears.
Power On
Press and hold the power button for 2 seconds until you hear “ power on ”.
Release the power button when the indicator light is turned on.
Power Off
Press and hold the power button for 2 seconds until you hear “ power off ”.
Release the power button when the indicator light is turned off.
Volume Control
The volume control touchpad is located on the right. Slide your finger up to
increase the volume and slide down to decrease the volume; increase or
decrease the sliding speed for larger adjustments.
Pairing| When the headset is powered off, press and hold the power button for
5 seconds, and listen for “power on” and a pairing tone.
The indicator light will flash to indicate. It is in pairing mode.
In your Bluetooth settings, search for “MOJO2” and tap to connect. Listen for
an indicator sound to indicate successful pairing. The indicator light will be
turned off after successful pairing.
---|---
Unpair| Choose “MOJO2” from your device’s Bluetooth settings and select
unpair. Wait for an indicator sound to indicate successful unpairing. After
unpairing, the indicator light will flash to indicate it is ready to be paired
with another device.\
Connect| When the headset is powered on, it will automatically connect to the
last connected device. You can also manually connect it to another device via
Bluetooth settings. Once the headset is connected, the indicator light will be
turned off. If the connection is unsuccessful, the indicator light will keep
on flashing.
Disconnect| In your Bluetooth settings, search for “MOJO2” and select to
disconnect. Listen for an indicator sound to indicate successful disconnect.
Reconnect automatically| In the connected state, if the distance between the
headset and the connected device exceeds the Bluetooth communication
range, the connection will be disconnected. The headset will enter into
pairing mode with the indicator light flashing. If the
distance between the headset and the connected device returns to the Bluetooth
communication range within 10 minutes, the headset will automatically be
connected again. If the headset is not reconnected within 10 minutes, the
headset will shut down automatically.
Multi-function button & volume control touchpad
| Play/Pause Music | Press lx |
|---|---|
| Skip to the next track | Press 2x |
| Back to the previous track | Press 3x |
| Answer a call | Press lx to answer |
| Decline a call | Press 2x to decline |
| Cancel an outgoing call | Press lx while calling |
| Hang up a call | Press lx during the call |
| Hold A’s call and answer an incoming call from B | During a call with A. press |
lx to answer an incoming call from B
End call with A and answer an incoming call from B| During a call with A.
press 2x to end the call with A and answer an incoming call from B
Voice Assistant| Click 2x on the touchpad
LED Light
| indicator light on | power on |
|---|---|
| indicator light off | power off |
| indicator light flashing slowly | not connected |
| indicator light flashing quickly | pairing |
| indicator light stops flashing and turns off | connected |
| indicator light flashing slowly | charging, battery at medium capacity |
| indicator light flashing quickly | charging, low battery quick-charging |
| indicator light on for 3 minutes then turns off | Battery fully charged |
Battery Low – white light flashes 3 times quickly Very low battery – white light flashes slowly 3 times:| low battery
Specifications
| Model: MOJO2 | Speaker: Bone Conduction Speaker |
|---|---|
| Frequency Response:2.4GHz | Bluetooth Pange:10m |
| Bluetooth Version : BT5.2 | Protocol: A2DP1.3 ( HFP ) AVPCP 1.5 |
| Battery: Lithium Ion Battery | Battery: 130mAh |
| Charging: 5V 500mA | Charging Time:<=80min |
| Playtime: 8 hours | Standby Time:130 hours |
| Microphone Sensitivity:-38dB | Waterproof: IP67 |
| Weight: 26g | Warranty: 1 Year |
Charging
Connect the USB-A end of the charging cable to a 5V power adapter. To charge
the headset, attach the magnetic charging head to the charging port of the
headset.
The indicator light will flash during the charging process. When the battery is
low, the light will flash slowly; when it is charged to medium battery
capacity, it will flash at a normal speed. After charging is completed, the
indicator light will stay on for 3 minutes, then turn off.
Restore to factory settings
Turn on the power, press and hold the power button for 8 seconds, and the
headset will be restored to factory settings. All pairing information will be
deleted, and it will enter into pairing mode after the automatic restart.
*Please charge the headset before using it for the first time. Make sure the charging port is dry.
Storage and Maintenance
The headset should be stored in a cool and dry place. It should be used at an
ambient temperature between 0°C(32℉ ) and 55°C(131℉ ) and charged at an
ambient temperate between 0°C and 40°C. Working in extremely cold, hot, or
humid environments may shorten the battery life.
When left unused for a long time, please recharge the headset before use.
The headset can be cleaned regularly. Do not use high-pressure water to wash
the microphone or immersed the product in water for an extended period of
time. Doing so may damage the microphone or waterproof performance. If the
charging port is wet, dry it with a soft dry cloth before charging.
Important Safety Instructions
Use manufacturer-designated accessories and supplies only.
Warning/Caution
-
When not in use, keep the headset away from children and pets.
This product contains lithium batteries which can be dangerous if swallowed. If swallowed, seek immediate medical attention.
Do NOT use the headset at a high volume for extended periods of time. -
To avoid hearing damage, use the headset at a moderate volume.
Listening to music at high volume levels may damage your hearing and the sound may be distorted.
– Please turn the volume down before placing the headset on your ears , then gradually turn the volume up to a comfortable listening level. -
For use of the headset during driving, use with caution and follow applicable laws regarding the use of mobile phones and headsets. Some jurisdictions impose specific limitations on the use of such products while driving.
Do not use the headset for any other purposes while driving. -
For use of the headset during activities that require concentration, such as cycling, walking on or near roads, construction sites, or railways, pay attention to your own safety and that of others. Follow relevant laws regarding the use of headphones.
-
This product contains small parts which may be a choking hazard. It is not suitable for children under age 3.
-
This product contains magnetic material. Consult your physician on whether this will affect your implanted medical device.
-
Do not make unauthorized alterations to the product.
-
Use this product with power sources approved by relevant authorities and meet local regulatory requirements (Ie. UL, CSA, VDE, CCC).
-
Do NOT expose the product to excessive heat (Ie. Avoid direct sunlight and keep away from fire).
-
Do not expose the product to high temperatures, smoke, or fume. Doing so may cause it to catch on fire.
-
Do not charge the headset during thunder and lightning.
-
Do not throw the headset into fire. Doing so may cause the battery to explode under high temperatures.
-
Do not expose this product to hot temperatures, smoke, or fume least it may catch fire.
-
Do not charge this product during thunder and lightning.
-
Do not throw this product into fire lest the battery may explode when overheated. The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Apple, the Apple logo, iPad, iPhone, and iPod are trademarks of Apple Inc,
registered in the U.S. and other countries/regions. App Store is a service
mark of Apple Inc. Use of the Made for Apple badge means that an accessory has
been designed to connect specifically to the Apple product(s) identified in
the badge, and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this product or its
compliance with safety and regulatory standards. Please note that the use of
this accessory with an Apple product may affect wireless performance.
Android, Google Play, and the Google Play logo are trademarks of Google LLC.
Accessories
Earplugs
For a more focused listening experience in noisy environments, please use the
earplugs included in the package to block out any background noises. Roll the
earplugs to fit into your ears.
Charging cable
Please only use the MOJO2 charging cable for charging. If the charging cable
is damaged, please replace it in time. Please follow 5V-500mA specifications
for the power adapter.
Storage Bag
When not in use, keep the headset in the storage bag to avoid damage.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
Caution!
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Contact us
If you have any other questions,
visit https://mojaverse.com
or mail to: aftersale@mojaverse.com
Product specifications, designs, and the content of these
operating instructions are subject to change without notice.
For an update on MOJAWA, please visit our website:
www.mojaverse.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>